Abstract:A SiO2/Al/LiNbO3 structure has a large electromechanical coupling factor (K2) and good temperature coefficient of frequency (TCF) for the UMTS Band I application. However, the SiO2/Al/LiNbO3 structure also supports two unwanted spurious responses; one is caused by the Rayleigh mode and the other by the transverse-mode. As the authors have previously discussed, the Rayleigh-mode spurious response can be suppressed by controlling the cross-sectional shape of a SiO2 overlay deposited on resonator electrodes. On the other hand, the transverse-mode spurious responses are commonly suppressed by IDT (Interdigital Transducer) apodization, and the length weighting for dummy electrodes selectively could scatter higher order transverse-mode spurious responses. In this paper, the spurious responses of the SAW resonator on a SiO2/Al/LiNbO3 structure are analyzed by the laser probe system. And, a new technique to suppress the transverse-mode spurious responses is proposed. In the technique, the SiO2 overlay is selectively removed from the dummy electrode region. The transverse-mode spurious behavior was dependent on the velocities (vi and vd) in the IDT and the dummy regions. When vi <; vd, the higher-order transverse-mode spurious response could be suppressed. Furthermore, the SAW energy confinement could be enhanced in the IDT electrode region by selectively SiO2 removing. The transverse-mode spurious responses were successfully suppressed without degrading the SAW resonator performances.

The modeling of the transverse mode in TC-SAW using SiO<sub>2</sub>/LiNbO<sub>3</sub> structure

The modeling of the transverse mode in TC-SAW using SiO2/LiNbO3 structure

Spurious Free TC-SAW Duplexer Using the SiO2/LiNbO3 Structure

Multimode coupling of modes model for spurious responses on SiO2/LiNbO3 substrate

The Design Of T-Septum Substrate Integrated Waveguide With An Ultra-Wideband Monomode

A New Type of Periodically Loaded Half-Mode Substrate Integrated Waveguide and Its Applications

Suppression Of Transverse Mode Spurious In Saw Resonators On An Sio2/Al/Linbo3 Structure For Wideband Cdma Applications

Analysis of SAW Resonator on SiO 2 / Al / LiNbO 3 Structure by using FEM / SDA FEM / SDA SiO 2 / Al / LiNbO 3 SAW

Suppression of Transverse-Mode Spurious Responses for Saw Resonators on Sio2/Al/Linbo3 Structure by Selective Removal of Sio2

Transverse Modes in Temperature Compensated Surface Acoustic Wave Devices

Modeling for High-Frequency Spurious Responses in Incredible High-Performance Surface Acoustic Wave Devices

Suppression of Transverse-Mode Spurious Responses by Selectively SiO2 Removing Technique for SAW Resonators on a SiO2/Al/LiNbO3 Structure

Transverse Mode Suppression for S0-Like SAW Mode Resonator

Parameter extraction of coupling-of-modes equations including coupling between two surface acoustic waves on SiO2/Cu/LiNbO3 structures

The Modeling and Analysis of Surface Acoustic Wave Filter Based on IDT/AIN/LiNbO3

Modeling Of Lateral Saw Propagation Including Coupling Between Different Saw Modes

Modeling and Analyzing High-Order Modes in Periodic-Stub-Loaded Stripline for Wideband Filter Design

The Extraction of Coupling-of-Modes Parameters in a Layered Piezoelectric Substrate and Its Application to a Double-Mode SAW Filter

Novel Spurious Suppression Technique for W-CDMA Duplexer Using SiO 2 / Al / LiNbO 3 Structure

Tilted IDT Designs for Spurious Modes Suppression in LiNbO$_{\text{3}}$/SiO$_{\text{2}}$/Si SAW Resonators

Coupling-Of-Modes Modelling For Fast And Precise Simulation Of Leaky Surface Acoustic Wave Devices