Abstract:The radial and axial vibration signals of a rotating machine are crucial information to understand the machine operation and to diagnose potential faults. Instead of using three single sensors to measure the horizontal, vertical and axial displacements of rotating shafts, a novel non-projection vision-based system was proposed to realize simultaneous measurement of the radial and axial displacements with high accuracy and good reliability using an tailored artificial constant density sinusoidal fringe pattern (CDSFP), which was pasted around the shaft surface and worked as a tri-axial (i.e. the horizontal, vertical and axial) displacement sensor. The measurement principle and setup of the proposed measurement system were well established. The horizontal displacement could be correctly obtained from the fringe period density changes of the CDSFP image sequence recorded by a high-speed camera. Simultaneously, the vertical displacement could be acquired by tracking the centerline of shaft whilst the axial displacement could be obtained by locating the peaks of the cross-correlation sequence of the fringe intensities. A sub-pixel method was employed to improve the displacement resolution of the developed system. The performance of the proposed system was demonstrated by the comparison of the experiments using eddy current sensors. It showed that the proposed method was an effective and accurate technique for real-time tri-axial vibration monitoring of rotating shaft. Experimental results verified the feasibility, effectiveness and good robustness of the proposed methodology, which demonstrated that the proposed system was capable of achieving accurate tri-axial vibration displacements of rotating shaft compared to the commercial eddy current sensor which could only measure one dimensional displacement at each measurement. Therefore, the vision-based tri-axial vibration monitoring system could be recommended for real engineering applications in condition monitoring of rotating shafts. (C) 2018 Elsevier Ltd. All rights reserved.

Exploiting Electrostatic Sensors for Rotational Machinery Shaft Centerline Orbit and Vibration Monitoring

Simulation Research on Exploiting Electrostatic Potential Difference Sensing for Shaft Centerline Orbit Reconstruction.

Nonlinear analysis of cylindrical capacitive sensor used for measuring high precision spindle rotation errors

Radial Vibration Measurement of Rotary Shafts Through Electrostatic Sensing and Hilbert-Huang Transform

Optimization of Electrostatic Sensors for Rotational Speed Measurement of a Metallic Rotor

Evaluation of the conductivity and permeability of rotor shaft material through electrical runout using FEM

Rotational Speed Measurement Through Electrostatic Sensing and Correlation Signal Processing

Real-time Three-Dimensional Vibration Monitoring of Rotating Shafts Using Constant-Density Sinusoidal Fringe Pattern As Tri-Axial Sensor

Performance Assessment of the Rotational Speed Measurement System Based on a Single Electrostatic Sensor

A Simple And Reliable Sensor For Accurate Measurement Of Angular Speed For Low Speed Rotating Machinery

A specially-designed electrostatic sensor for the condition monitoring of rolling bearings

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Orthogonal On-Rotor Sensing Vibrations for Condition Monitoring of Rotating Machines

Rotational Speed Measurement Using Electrostatic Sensors with Single or Double Electrodes

Development of electrical runout online measurement system based on eddy current technique and laser triangulation

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

Electromagnetic field analysis and modeling of a relative position detection sensor for high speed maglev trains

Analysis of Main Error Sources for the Error Motion Measurement of a Precision Shafting Using a T-Type Capacitive Sensor

Rotational Speed Measurement Using Electrostatic Sensors and Correlation Signal Processing Techniques.

Motion Induced Eddy Current Sensor for Non-Intrusive Vibration Measurement

Rotor Position Detection Based on Magnetically Coupled Resonant Principle and Its Implementation