Abstract:Terahertz (THz) radiation, which is defined as the electromagnetic wave with a frequency ranging from 0.1 THz to 10 THz, has attracted widespread attention in recent years because of its unique possibilities in many fields. Highperformance THz polarization splitter, a key device in THz manipulation, is of great significance for studying the THz devices. In the present paper, a novel dual-core THz polarization splitter is proposed, which is based on porous fiber with near-tie units. The introduction of near-tie units into the fiber core can enhance asymmetry to realize high mode birefringence. And the results show that the porous THz fiber exhibits high birefringence at a level of 10(-2) over a wide frequency range. An index converse matching coupling (ICMC) method, which exhibits several advantages (such as short splitting length, high extinction ratio, low loss, and broad operation bandwidth), is used to allow for the coupling of one polarization mode within a broad operation band, while the coupling of the other polarization component is effectively inhibited. The splitting length is equal to one coupling length of x-or y-polarization component for which inter-core coupling occurs, and short splitting length means low transmission loss. Unlike the reported filling method, an adjusting structure method is proposed in the paper to satisfy the condition of index converse matching coupling. The full vector finite element method (FEM), which is based on the variational principle and the subdivision interpolation, is used to analyze the guiding properties of the proposed THz polarization splitter. The FEM is a widely used numerical method in physical modeling and simulation. Simulation results show that the THz polarization splitter operates within a wide frequency range of 0.5-2.5 THz. The splitting length does not exceed 2.5 cm in the whole frequency range and the minimum is only 0.428 cm. At 2.3 THz, the material absorption losses of x-and y-polarization are both less than 0.35 dB, and the extinction ratios for x-and y-polarization are 2.9 and 19.2 dB, respectively. Moreover, by comparing with a THz polarization splitter with filling method, the proposed THz polarization with adjusting structure method is easier to realize, the operating frequency range is wider, the splitting length is shorter, and the material absorption loss is lower. Finally, we note that the fabrication of such THz porous fiber designs could be realized by several methods, such as a capillary stacking technique, a polymer casting technique, a hole drilling technique, etc.

Self-supporting Polymer Pipes for Low Loss Single-Mode THz Transmission

THz wave transmission in thin-wall PMMA pipes fabricated by fiber drawing technique

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Attenuation Characteristics of the Guided THz Wave in Parallel-Plate Ferroelectric-Graphene Waveguides

Flexible Pmma Pipe For Terahertz Propagation

A low-loss polarization-maintaining terahertz fiber

Dual Cylindrical Metallic Grating-Cladding Polymer Hollow Waveguide for Terahertz Transmission with Low Loss

End-to-end Modeling and Analysis for Terahertz Wireline Transmission System with Solid Polymer Fiber

Low-loss Air-Core Polarization Maintaining Terahertz Fiber

Anti-resonant fibre with high-resistivity silicon for THz wave transmission

Single-Polarization Single-Mode Photonic Crystal Fiber for Terahertz Applications

Low-loss Polarization-Maintaining THz Photonic Crystal Fiber with a Triple-Hole Core.

Fabrication of Ag/PP terahertz hollow waveguide by vacuum evaporation method and transmission performance investigations

Low-loss Polarization-Maintaining Terahertz Fiber Based on Central Air Hole Movements

Single polarization single mode THz hollow-core anti-resonant waveguide with multi-size semi-elliptical tubes and high-resistance silicon layer

Ultra-low Loss with Single Mode Polymer-Based Photonic Crystal Fiber for THz Waveguide

Dual-core terahertz polarization splitter based on porous fibers with near-tie units

Design, fabrication, and characterization of a single-polarization single-mode flexible hollow waveguide for low loss millimeter wave propagation

Low-Loss Flexible Polarization-Maintaining Hollow Waveguide for Linearly Polarized 100 GHz Radiation Transmission and Subwavelength Imaging

Anti-resonant fiber with nested U-shape tubes for low-loss terahertz waveguides

Transmission Characteristics of Hollow Dielectric Film-Coated Waveguides for THz Radiation