Hollow metallic 1T MoS2 arrays grown on carbon cloth: a freestanding electrode for sodium ion batteries

Wang-jia Tang,Xiu-li Wang,Dong Xie,Xin-hui Xia,Chang-dong Gu,Jiang-ping Tu

DOI: https://doi.org/10.1039/c8ta06905k

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:We have synthesized hollow metallic 1T MoS2 arrays on carbon cloth and tested their electrochemical performance in sodium ion batteries.

What problem does this paper attempt to address?

Hollow metallic 1T MoS2 arrays grown on carbon cloth: a freestanding electrode for sodium ion batteries

Wangjia Tang,Xiuli Wang,Dong Xie,Xinhui Xia,C.D. Gu,Jiangping Tu

DOI: https://doi.org/10.1039/c8ta06905k

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Smart design and construction of advanced electrodes are crucial for the development of new electrochemical energy storage systems. In this study, we realized hollow 1T MoS2 arrays grown on carbon cloth via a template-free solvothermal method. Hollow MoS2 arrays, with diameters of 400-500 nm, are composed of curved MoS2 nanosheets. This well-designed structure and the introduction of metallic phase MoS2 can improve electrical conductivity, shorten the electron/sodium ion diffusion, and accommodate the large volume changes during cycling. Due to these features, when employed as an anode of sodium ion batteries, the hollow 1T MoS2 array electrode delivers superior sodium ion storage properties, including enhanced cycling stability (576 mA h g(-1) after 200 cycles at 200 mA g(-1)) and high rate capability (276 mA h g(-1) at high current density of 2 A g(-1)). Our study may guide the synthesis of other nanostructured metal sulfide anodes for electrochemical energy applications.
Metallic 1T MoS2 Nanosheet Arrays Vertically Grown on Activated Carbon Fiber Cloth for Enhanced Li-ion Storage Performance

Minghong Wu,Jing Zhan,Kuan Wu,Zhen Li,Liang Wang,Bijang Geng,Lijun Wang,Dengyu Pan

DOI: https://doi.org/10.1039/c7ta03497k

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Metallic 1T-phase MoS2 nanosheets have a high concentration of edge active sites and other defects, for enhanced Li-ion storage performance.
NiS-MoS2 Hetero-nanosheet Arrays on Carbon Cloth for High-Performance Flexible Hybrid Energy Storage Devices

Shundong Guan,Xiuli Fu,Zhezhu Lao,Chuanhong Jin,Zhijian Peng

DOI: https://doi.org/10.1021/acssuschemeng.9b01696

IF: 8.4

2019-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Coupling two-dimensional (2D) electroactive species with 3D carbon substrates is a very promising strategy to fabricate advanced electrodes for high-performance flexible electrical energy storage devices. However, the intractable coupling between them has prevented the wide applications of such a strategy. Herein, we develop a facile one-step hydrothermal synthesis technique to directly construct NiS-MoS2 heteronanosheet arrays on carbon cloth (NiS-MoS2 HNSAs/CC) via introducing sodium dodecyl sulfate as the surfactant together with Ni, Mo, and S sources. Such vertically aligned nanosheet heterostructures constructed an integrated 3D open framework, helping improve the performance of electrodes from various aspects. Consequently, the NiS-MoS2 HNSAs/CC electrode achieves a very high areal capacity and specific capacity (0.76 mAh.cm(-2) and 271.7 mAh.g(-1), respectively, at a current density of 2.5 mA.cm(-2)) and good rate capability (39% at 40 mA.cm(-2)). With the NiS-MoS2 HNSAs as a positive electrode and typical activated carbon as a negative electrode, the fabricated solid-state hybrid capacitors have a high output cell voltage of 1.6 V and thus deliver a high energy density of 3.75 mWh.cm(-3) at a power density of 31.6 mW.cm(-3) with excellent flexibility and charging discharging stability.
Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

Yonghe Li,Zhun Liu,Xiaopeng Cheng,Xianqiang Liu,Bin Zhang,Dongsheng Sun,Ruzhi Wang,Yuefei Zhang

DOI: https://doi.org/10.1016/j.ensm.2017.07.008

IF: 20.4

2017-01-01

Energy Storage Materials

Abstract:Molybdenum disulfide (MoS2) has received considerable interest for electrochemical energy storage and conversion. In this work, we demonstrate a material on synthesis of a unique hierarchical hollow structure by growing layered MoS2 nanosheets on assembled graphene nanotubes via a template-sacrificed approach (named as graphene@MoS2 nanotubes). As a proof of concept, the graphene@MoS2 nanotubes as the anode materials of lithium-ion batteries exhibit excellent cycling performance at 400 mA g(-1) up to 120 cycles without considerable capacity loss (830 mA h g(-1), with 96.5% capacity retention) and high rate behavior (502 mA h g(-1) at 2000 mA g(-1)), which is far beyond than that of the pure MoS2 nanosheets and even graphene@MoS2 nanosheets composites. Furthermore, combined with in-situ TEM lithiation experiments, we find a novel conversion reaction mechanism of MoS2 anodes that Li ions induce structural destruction in c-direction following a dynamic layer-by-layer dissociation with Mo/Li2S composites left, rather than well-known multistep reaction in bulk phase. The first-principles computations verify that the surfacial relaxation of Li2S to form an anti-fluorite structure on higher electric conductive LixMoS(2) surface is the primarily thermodynamic driving force for activating the above-mentioned reaction. These results are envisaged to be helpful for designing durable conversion-type MoS2 anodes by surface engineering, and the hierarchical tubular feature further points out a new protocol for graphene based hybrid anode for enhanced lithium-ion batteries.
3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Yan Wang,Qunting Qu,Guangchao Li,Tian Gao,Feng Qian,Jie Shao,Weijie Liu,Qiang Shi,Honghe Zheng

DOI: https://doi.org/10.1002/smll.201602268

IF: 13.3

2016-01-01

Small

Abstract:Currently, the specific capacity and cycling performance of various MoS2/carbon-based anode materials for Na-ion storage are far from satisfactory due to the insufficient structural stability of the electrode, incomplete protection of MoS2 by carbon, difficult access of electrolyte to the electrode interior, as well as inactivity of the adopted carbon matrix. To address these issues, this work presents the rational design and synthesis of 3D interconnected and hollow nanocables composed of multiwalled carbon@MoS2@carbon. In this architecture, (i) the 3D nanoweb-like structure brings about excellent mechanical property of the electrode, (ii) the ultrathin MoS2 nanosheets are sandwiched between and doubly protected by two layers of porous carbon, (iii) the hollow structure of the primary nanofibers facilitates the access of electrolyte to the electrode interior, (iv) the porous and nitrogen-doping properties of the two carbon materials lead to synergistic Na-storage of carbon and MoS2. As a result, this hybrid material as the anode material of Na-ion battery exhibits fast chargetransfer reaction, high utilization efficiency, and ultrastability. Outstanding reversible capacity (1045 mAh g(-1)), excellent rate behavior (817 mAh g(-1) at 7000 mA g(-1)), and good cycling performance (747 mAh g(-1) after 200 cycles at 700 mA g(-1)) are obtained.
Hierarchical MoS 2 Nanotubes Supported by Tubular CoS 2 on Carbon Cloth as Flexible Electrodes for Durable Lithium-Ion Storage

Shenyu Du,Liyuan Ao,Jianli Tang,Kai Jiang,Liyan Shang,Yawei Li,Jinzhong Zhang,Liangqing Zhu,Zhigao Hu,Junhao Chu

DOI: https://doi.org/10.1021/acsaem.2c01675

IF: 6.4

2022-08-11

ACS Applied Energy Materials

Abstract:An ingenious design and a controllable architecture are critical for the construction of flexible electrodes. In this study, we realized the enriched nanorods on carbon cloth as templates by controlling the growth of metal–organic frameworks (MOFs) and finally formed hollow CoS2@MoS2 nanotube arrays after postprocessing. The outer layer is staggered interconnected MoS2 nanosheets with gaps between them, providing rich active points for electrochemical reaction. The hierarchical tubular structure and core–shell system significantly improves the electrical conductivity, promotes the diffusion of lithium ions, and has a good buffering effect on the volume change. Therefore, it exhibits an excellent lithium storage capacity with an areal specific capacity as high as 2.35 mAh cm–2 after 100 cycles at a current density of 0.5 mA cm–2. Furthermore, it reaches 1.55 mAh cm–2 in the full-cell test at 5 mA cm–2. At the same time, its strong flexibility enables stable capacity output in pouch cells. In this regard, our research provides an idea for the application of flexible devices.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Layer-By-Layer Polyelectrolyte Assisted Growth of 2d Ultrathin Mos2 Nanosheets on Various 1d Carbons for Superior Li-Storage

Qunting Qu,Feng Qian,Siming Yang,Tian Gao,Weijie Liu,Jie Shao,Honghe Zheng

DOI: https://doi.org/10.1021/acsami.5b10497

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:Transitional metal sulfide/carbon hybrids with well-defined structures could not only maximize the functional properties of each constituent but engender some unique synergistic effects, holding great promise for applications in Li-ion batteries and supercapacitors and for catalysis. Herein, a facile and versatile approach is developed to controllably grow 2D ultrathin MoS2 nanosheets with a large quantity of exposed edges onto various 1D carbons, including carbon nanotubes (CNTs), electrospun carbon nanofibers, and Te-nanowire-templated carbon nanofibers. The typical approach involves the employment of layer-by-layer (LBL) self-assembled polyelectrolyte, which controls spatially the uniform growth and orientation of ultrathin MoS2 nanosheets on these 1D carbons irrespective of their surface properties. Such unique structures of the as-prepared CNTs@MoS2 hybrid are significantly favorable for the fast diffusions of both Li-ions and electrons, satisfying the kinetic requirements of high-power lithium ion batteries. As a result, CNTs@MoS2 hybrids exhibit excellent electrochemical performances for lithium storage, including a high reversible capacity (1027 mAh g(-1)), high-rate capability (610 mAh g(-1) at 5 C), and excellent cycling stability (negligible capacity loss after 200 continuous cycles).
Self-supported hierarchical hollow-branch cobalt oxide nanorod arrays as binder-free electrodes for high-performance lithium ion batteries

wen zhang,xiaoyan yan,xili tong,jing yang,ling miao,yaoyao sun,liyuan peng

DOI: https://doi.org/10.1016/j.matlet.2015.09.134

IF: 3

2016-01-01

Materials Letters

Abstract:In this work, hierarchical hollow-branch CoO nanorod arrays are synthesized by an electrodeposited template method. Interestingly, the as-prepared hierarchical CoO arrays possess combined properties of hollow core and interconnected nanosheet branches. As anode for lithium ion batteries, the hollow-branch CoO nanorod arrays exhibit impressive electrochemical performances with good cyclability and high-rate capability due to the unique hollow-branch architecture with fast ion/electron transfer path and sufficient contact between active materials and electrolyte. The developed methodology enables a new fabrication of hierarchical hollow metal oxides with applications in electro-catalysis, optical and electrochemical devices.
Metal-organic Framework Derived FeS/MoS2 Composite As a High Performance Anode for Sodium-Ion Batteries

Likang Fu,Wenqi Xiong,Qiming Liu,Shuyun Wan,Chenxia Kang,Gaofeng Li,Jun Chu,Yucheng Chen,Shengjun Yuan

DOI: https://doi.org/10.1016/j.jallcom.2021.159348

IF: 6.2

2021-01-01

Journal of Alloys and Compounds

Abstract:Considering the superior performances of MOF-based and MoS2-based materials, a flower-like FeS/MoS2 composite is synthetized using MIL-100(Fe) as a precursor. Electronic density of states and band structure are simulated by density functional theory (DFT) calculations, which prove that FeS/MoS2 heterostructure exhibits metallic behavior. Unique structure and powerful hetero-interface synergistic effect of FeS/MoS2 is conducive to improve the stability of sodium-ion batteries (SIBs). It provides reversible capacities of 464 and 365 mA h g(-1) at 0.1 and 1.0 A g(-1). When the current density increases to 5 A g(-1), FeS/MoS2 delivers a high capacity of 325 mA h g(-1) with a capacity retention rate (71.1%). Moreover, it can maintain a stable specific capacity of 331 mA h g(-1) at 2.0 A g(-1) after 200 cycles. Adsorption energy calculated by DFT indicates that more Na atoms may be trapped on the top of Mo atom between FeS and MoS2 layers. This study may stimulate the interesting of multivariate-MOFs/covalent organic frameworks (COFs) composite emerging two-dimensional materials and facilitate the application of composite electrode in high-performance SIBs. (C) 2021 Elsevier B.V. All rights reserved.
Stable Li+/Na+ Batteries with Anodes Boosted by Hollow Tubular-Structured MoS2 Nanosheet/N-Doped Carbon Nanosheet Composites

Sijia Li,Yutong Li,Zejun Zhao,Fang Wang,Xiaobing Bao,Chentao Hao,Zilong Tang,Yong Yang

DOI: https://doi.org/10.1021/acsanm.1c01747

IF: 6.14

2021-01-01

ACS Applied Nano Materials

Abstract:Engineering a hollow architecture has been regarded as an efficient strategy for boosting energy storage and conversion. Herein, hollow hierarchical carbon nanotubes coupled with MoS2 nanosheets were successfully designed and fabricated to construct high-performance lithium-/sodium-ion batteries. A tubular Mo-polydopamine hybrid precursor was formed by a simple metal chelation reaction and a self-template effect, and subsequently in situ converted into MoS2 nanosheets embedded into carbon nanotubes after heat treatment. Benefiting from the synergistic effect between strong coupling hierarchical carbon/MoS2 nanosheets and a tubular hollow structure, the as-prepared electrode exhibited an outstanding storage capacity and an ultrastable cycling stability for lithium-/ sodium-ion storage. Evaluated as an anode for a lithium-ion battery, it presented a high-rate capacity of 1228.2 mA h g(-1) at 1000 mA g(-1). As for a sodium-ion battery, a capacity of 210.1 mA h g(-1) can be maintained after 9000 cycles under a high current density of 8000 mA g(-1). The storage mechanism analysis indicated that the charge-discharge process was dominated by a pseudocapacitive behavior. The present work highlights the synthesis of electrode materials with a hierarchical hollow structure to boost the development of electrochemical energy storage.
Hollow Mo2C Nanofibers Improve the Electrochemical Performance of Cathode for Lithium-Sulfur Battery

Bin Yue,Wensheng Yu,Yuqi Wang,Ningyuan Zhang,Jinxian Wang,Qianli Ma,Yingying Bao,Lin Li,Xiangting Dong

DOI: https://doi.org/10.1109/3m-nano58613.2023.10305367

2023-01-01

Abstract:In this study, convenient and rapid electrospinning technology is used to prepare molybdenum-carbide (Mo 2 C) loaded nanofibers and Mo 2 C loaded hollow nanofibers. The electrical conductivity of the sulfur cathode can be significantly improved through the utilization of Mo 2 C hollow carbon nanofibers as the supporting matrix material. Furthermore, the hollow nanofiber architecture can additionally function as a cushion to alleviate the volumetric alterations. Mo 2 C particles attached to the fiber surface can fully contact polysulfide and catalyze it to short-chain Li 2 S 4 and Li 2 S 2 . The cathode electrode using hollow Mo 2 C nanofibers as matrix material exhibits an initial specific capacity of 904 mAh g -1 at 0.2 °C. After 200 cycles, the composite cathode still maintain a reversible specific capacity of 573 mAh g -1 , and capacity loss rate is only 0.18% per cycle. Hollow Mo 2 C nanofibers exhibit superior electrochemical performance compared to Mo 2 C nanofibers, thanks to the effective confinement of the shuttle effect and improved sulfur-utilization achieved through the construction of hollow structure. This work presents a straightforward and effective method for generating one-dimensional nanofibers as cathode support materials for lithium-sulfur batteries.
1T MoS 2 growth from exfoliated MoS 2 nucleation as high rate anode for sodium storage

Zhanwei Xu,Xinyue Liu,Kai Yao,Yuchuan Ren,Jiayin Li,Xuetao Shen,Zhi Li

DOI: https://doi.org/10.1088/1361-6528/ac2d09

IF: 3.5

2021-10-22

Nanotechnology

Abstract:Abstract Recently, metallic 1T MoS 2 has been investigated due to its excellent performance in electrocatalysts, photocatalysts, supercapacitors and secondary batteries. However, there are only a few fabrication methods to synthesize stable 1T MoS 2 . In this work, exfoliated MoS 2 is employed as seed crystals for the nucleation and growth of a stable 1T MoS 2 grains by an epitaxial growth strategy. The 1T MoS 2 displays a large interlayer spacing around 0.95 nm, excellent hydrophilia and more electrochemically active sites along the basal plane, which contribute an efficient ion/electron transport pathway and structural stability. When employed as the anode material for sodium ion batteries, the 1T MoS 2 electrodes can survive 500 full charge/discharge cycles with a minimum capacity loss of 0.40 mAh g −1 cycle −1 tested at a current density of 1.0 A g −1 , and the capacity degradation is as low as 0.39 mAh g −1 cycle −1 at a current density of 2.0 A g −1 .

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
One-pot synthesis of hierarchical Co1–S/NC@MoS2/C hollow nanofibers based on one-dimensional metal coordination polymers for enhanced lithium and sodium-ion storage

Yanzi Wang,Wanyi Xie,Dongzhi Li,Pei Han,Ludi Shi,Yuanyi Luo,Guangtao Cong,Cuihua Li,Jiali Yu,Caizhen Zhu,Jian Xu

DOI: https://doi.org/10.1016/j.scib.2020.05.006

IF: 18.9

2020-09-01

Science Bulletin

Abstract:Multicomponent metal sulfides have been recognized as promising anode materials for lithium/sodium-ion storage given their enticing theoretical capacities. However, the simplification of synthetic processes and the construction of heterogeneous interfaces of multimetal sulfides remain great challenges. Herein, a hierarchical 1T-MoS2/carbon nanosheet decorated Co1-xS/N-doped carbon (Co1-xS/NC@MoS2/C) hollow nanofiber was designed and constructed via a one-pot hydrothermal method using a cobalt-based coordination polymer nanofiber. This nanofiber can transform in-situ into conductive N-doped carbon hollow fibers embedded with active Co1-xS nanoparticles, enabling the epitaxial growth of MoS2 nanosheets. Consequently, the Co1-xS/NC@MoS2/C composites achieve exceptional lithium/sodium-ion storage performance. Compared to MoS2/C microspheres and Co1-xS/NC hollow nanofibers alone, the Co1-xS/NC@MoS2/C hollow nanofibers deliver higher discharge capacities (1085.9 mAh g-1 for lithium-ion batteries (LIBs) and 748.5 mAh g-1 for sodium-ion batteries (SIBs) at 100 mA g-1), better capacity retention (910 mAh g-1 for LIBs and 636.5 mAh g-1 for SIBs after 150 cycles at 100 mA g-1), and increased cycling stability (407.2 mAh g-1 after 1000 cycles for SIBs at 1000 mA g-1). Furthermore, the kinetic analysis shows that the lithium/sodium-ion storage processes of the Co1-xS/NC@MoS2/C electrode are mainly controlled by pseudocapacitance behavior. The excellent electrochemical properties can thus be ascribed to the synergy of the MoS2/C nanosheets with the enlarged interlayer spacing, good conductivity of the carbon layers, and the Co1-xS nanoparticles embedded in the hollow nanofibers with extensive reaction sites.

multidisciplinary sciences
Vertically Aligned MoS2 Nanosheets with Increased Interlayer Spacing on Hollow Polypyrrole Nanotubes for Enhanced Lithium and Sodium Storage Performance

Weihang Hu,Hui Liu,Wanmeng Dong,Hafiz Akif Munir,Xin Tian,Xiuyi Fan,Lingyan Pang

DOI: https://doi.org/10.1002/ente.202401010

IF: 4.149

2024-10-04

Energy Technology

Abstract:The hollow nanotubes constructed with highly conductive 1T MoS2 nanosheets and PPy nanotubes were fabricated. These hollow nanotubes show a huge lithium specific capacity of 755.5 mAh g−1 at 100 mA g−1, and sodium specific capacity of 503.3 mAh g‐1 after 200 cycles. The enhanced electrochemical performance due to the unique 1D and 2D composite structure and excellent conductive property. MoS2 is the most promising anode material for secondary battery with its unique 2D layered structure. However, the application of MoS2 is restricted by the poor electrical conductivity and sluggish ion diffusion. Herein, hollow nanotubes constructed with highly conductive 1T phase MoS2 nanosheets and polypyrrole (PPy) nanotubes are fabricated and used as anode materials for lithium‐ion batteries and sodium‐ion batteries. Remarkably, these hollow nanotubes show a high lithium‐specific capacity of 755.5 mAh g−1 at 100 mA g−1 and excellent sodium‐specific capacity of 503.3 mAh g−1 after 200 cycles. The enhanced electrochemical performance can be attributed to the rational design of unique 1D and 2D composite structure. First, the highly conductive 1T phase MoS2 2D nanosheets and hollow 1D PPy nanotube can effectively promote the charge transfer kinetics. However, the increased interlayer spacing of 1T phase MoS2 rapidly improves the insertion/extraction process of metal ions, and the vertical growth of MoS2 nanosheets on the surface of the PPy nanotubes also exposes more energy storage sites. This work provides a new idea for the preparation of MoS2‐based composite materials, and also proposes a reference for its application in the secondary battery.

energy & fuels
Chemical activation of hollow carbon nanospheres induced self-assembly of metallic 1T phase MoS2 ultrathin nanosheets for electrochemical lithium storage

Yanguo Liu,Jiayuan Chen,Chang Xu,Tingli Yu,Zhipeng Li,Zhiqiang Wei,Lizhi Qian,Yanfen Wan,Peng Yang,Zhiyuan Wang,Shaohua Luo,Hongyu Sun

DOI: https://doi.org/10.1016/j.electacta.2020.136545

IF: 6.6

2020-09-01

Electrochimica Acta

Abstract:Ultrathin nanosheets made by transition metal dichalcogenide show the potential as high-capacity anode materials for lithium ion batteries (LIBs). However, the tendency of restacking individual nanosheet due to strong van der Waals force, a dramatic volume variation upon continuous cycling, as well as poor intrinsic conductivity greatly restrict their practical applications. In this work, high content metallic phase molybdenum disulfide (1T/2H-MoS2) ultrathin nanosheets with higher intrinsic conductivity and extended interlayer distance are vertically assembled on the outer surface of chemically activated hollow carbon nanospheres (CAHCSs) through a facile solvothermal method. Phase structure, chemical composition, and microstructure studies show that the obtained composites (/2H-MoS2) have optimized structural and compositional advantages to efficiently store lithium ions. When evaluated as anodes for LIBs, the /2H-MoS2 electrode show excellent fast and stable lithium storage properties. In specific, the /2H -MoS2 electrode delivers a large reversible capacity of 831 mAh g−1 at 1 A g−1 after 200 cycles. At a higher current density of 2 A g−1, the /2H-MoS2 electrode has a reversible capacity of 863 mAh g−1. The proposed electrode design strategy provides an alternative route to promote the ion storage in transition-metal-dichalcogenides-based materials.

electrochemistry
Stable Li + /Na + Batteries with Anodes Boosted by Hollow Tubular-Structured MoS 2 Nanosheet/N-Doped Carbon Nanosheet Composites

Sijia Li,Yutong Li,Zejun Zhao,Fang Wang,Xiaobing Bao,Chentao Hao,Zilong Tang,Yong Yang

DOI: https://doi.org/10.1021/acsanm.1c01747

IF: 6.14

2021-10-07

ACS Applied Nano Materials

Abstract:Engineering a hollow architecture has been regarded as an efficient strategy for boosting energy storage and conversion. Herein, hollow hierarchical carbon nanotubes coupled with MoS2 nanosheets were successfully designed and fabricated to construct high-performance lithium-/sodium-ion batteries. A tubular Mo–polydopamine hybrid precursor was formed by a simple metal chelation reaction and a self-template effect, and subsequently in situ converted into MoS2 nanosheets embedded into carbon nanotubes after heat treatment. Benefiting from the synergistic effect between strong coupling hierarchical carbon/MoS2 nanosheets and a tubular hollow structure, the as-prepared electrode exhibited an outstanding storage capacity and an ultrastable cycling stability for lithium-/sodium-ion storage. Evaluated as an anode for a lithium-ion battery, it presented a high-rate capacity of 1228.2 mA h g–1 at 1000 mA g–1. As for a sodium-ion battery, a capacity of 210.1 mA h g–1 can be maintained after 9000 cycles under a high current density of 8000 mA g–1. The storage mechanism analysis indicated that the charge–discharge process was dominated by a pseudocapacitive behavior. The present work highlights the synthesis of electrode materials with a hierarchical hollow structure to boost the development of electrochemical energy storage.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.1c01747.SEM images and TEM images of the as-obtained MoO3 nanowires; XRD pattern of the as-obtained MoO3 nanowires; XRD pattern of the hierarchical Mo-PDA hybrid; SEM image of the hierarchical Mo-PDA hybrid; HRTEM images of hierarchical C-MoS2 NT; EDX spectrum of hierarchical C-MoS2 NT; XPS survey spectrum of C-MoS2 NTs; Raman spectrum of C-MoS2 NTs; nitrogen adsorption/desorption isotherm and pore size distribution; TGA pattern of C-MoS2 NT; charge–discharge voltage profiles; CV profiles; b-value analysis; capacitive charge storage contribution; GITT curve of the C-MoS2 NT anode; Li+ diffusion coefficient; Nyquist plots; and comparison of our data with the related literature data for SIBs (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Hollow nanorods MoS2@SnS heterojunction for sodium storage with enhanced cyclic stability

Jing Xu,Lina Wang,Ke-Jing Huang,Peilong Chen,Geng li,Zhong Dong,Linxia Fang

DOI: https://doi.org/10.1016/j.ces.2022.117702

IF: 4.7

2022-04-01

Chemical Engineering Science

Abstract:Coupling the composite electrodes formed by two different semiconductors is an effective way to enhance the charge transfer rate and interfacial reaction kinetics of electrodes. In this work, two-dimensional stannous sulfide nanosheets (SnS) coated molybdenum disulfide (MoS2) nanotube constructed hierarchical nanostructure is obtained by using conventional template method, and the battery properties are studied in detail. The specific discharge capacity of the composite material reaches up to 819 mAh g−1, and the initial coulombic efficiency (CE) is 81.8% at first cycle. The discharge capacity is maintained at 430.7 mAh g−1 with decay of only 7.2% after 300 cycles at 1000 mA g−1. These impressive discharge properties may be related to the designed layered structure that accelerates the separation and transfer rate of ions and electrons at the electrode interface. The unique hierarchical structure can also provide abundant reaction binding sites, buffer the electrode volume change, and thus enhance the sodium storage performance.

engineering, chemical
Preparation and Electrochemical Properties of MoS2/C Hollow Microspheres

Pengan YIN,Zichen WANG,Hui YANG,Xingzhong GUO

DOI: https://doi.org/10.14062/j.issn.0454-5648.2017.11.15

2017-01-01

Abstract:MoS2 and carbon (C) were firstly formed on the surface of SiO2 nanoparticles prepared by sol-gel method as sacrificial template with hexadecyltrimethylammonium bromide (CTAB), and then molybdenum disulfide/carbon hollow microspheres were prepared by alkali liquor etching silica microsphere matrix microspheres. The products were characterized, and the electrochemical properties of the products as electrode materials were investigated by constant current charging and discharging, magnification performance, cyclic voltammetry and AC impedance testing. The results show that the size of as-prepared MoS2/C hollow microspheres is approxinmately 200-300 nm, and its surface is wrapped with petaloid MoS2 lamellae and amorphous carbon. As a lithium battery anode material, the resultant product shows the first charge and discharge capacity of more than 1400 mA·h/g at a current density of 100 mA/g, and the capacity can still maintain 460 mA·h/g after 60 cycles.
Hollow Co–Mo–Se nanosheet arrays derived from metal-organic framework for high-performance supercapacitors

Chenxu Miao,Chunliang Zhou,Hong-En Wang,Kai Zhu,Ke Ye,Qian Wang,Jun Yan,Dianxue Cao,Neng Li,Guiling Wang

DOI: https://doi.org/10.1016/j.jpowsour.2021.229532

IF: 9.2

2021-04-01

Journal of Power Sources

Abstract:Developing novel materials with rational structures and excellent electrical conductivity is vitally important for energy storage devices. Herein, hollow cobalt molybdenum selenide (Co–Mo–Se) nanosheet arrays are fabricated via a self-sacrificing template method and selenization process, where cobalt-organic framework serves as the template. Benefiting from unique hollow nanoarrays structure, the Co–Mo–Se electrode offers rich electroactive sites, large accessible regions for electrolyte, and short ions diffusion pathways. Additionally, it is observed that the Co–Mo–Se possesses a low charge transfer resistance owing to the intrinsic metallicity. As a result, the Co–Mo–Se electrode exhibits favorable energy storage properties, including high capacity (221.7 mAh g−1), good rate property, and outstanding stability (95% after 8000 cycles). More importantly, the assembled Co–Mo–Se//active carbon (AC) achieves high energy density (44.7 Wh kg−1) and remarkable durability. Notably, two hybrid devices connected in series successfully power an electronic watch for 70 min, demonstrating its practical applicability. These results indicate that the synthesized hollow Co–Mo–Se nanosheet arrays have promising applications as electrode materials for high-performance energy storage devices.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
1T-Phase MoS2 with large layer spacing supported on carbon cloth for high-performance Na+ storage

Li-Na Wang,Xu Wu,Fu-Ting Wang,Xue Chen,Jing Xu,Ke-Jing Huang

DOI: https://doi.org/10.1016/j.jcis.2020.09.055

IF: 9.9

2021-02-01

Journal of Colloid and Interface Science

Abstract:The design and construction of advanced electrode materials is important to the development of high-performance electrochemical energy storage devices. In this paper, V-doped 1T MoS2 nanosheets with a large layer spacing are grown on carbon cloth (CC) via a one-step hydrothermal method. The resulting material features abundant edge sites and active centers, and its large layer spacing facilitates the interlayer shuttle of Na+. Doping with V buffers the volume change and maintains the integrity of MoS2. The layered structure of the composite featuring CC as a conductive substrate effectively prevents the agglomeration of MoS2 during the electrochemical process. When used as an anode material for a Na+ battery, the material displays a high first-cycle irreversible discharge specific capacity of 1234.9 mAh g-1. A specific capacity of 453.2 mAh g-1 is obtained after 100 cycles at a current density of 200 mA g-1. This work provides an effective and eco-friendly route toward obtaining superior MoS2 electrodes for high-performance Na+ storage.

chemistry, physical

Hollow metallic 1T MoS<sub>2</sub> arrays grown on carbon cloth: a freestanding electrode for sodium ion batteries

Hollow metallic 1T MoS2 arrays grown on carbon cloth: a freestanding electrode for sodium ion batteries

Metallic 1T MoS2 Nanosheet Arrays Vertically Grown on Activated Carbon Fiber Cloth for Enhanced Li-ion Storage Performance

NiS-MoS2 Hetero-nanosheet Arrays on Carbon Cloth for High-Performance Flexible Hybrid Energy Storage Devices

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Hierarchical MoS 2 Nanotubes Supported by Tubular CoS 2 on Carbon Cloth as Flexible Electrodes for Durable Lithium-Ion Storage

Layer-By-Layer Polyelectrolyte Assisted Growth of 2d Ultrathin Mos2 Nanosheets on Various 1d Carbons for Superior Li-Storage

Self-supported hierarchical hollow-branch cobalt oxide nanorod arrays as binder-free electrodes for high-performance lithium ion batteries

Metal-organic Framework Derived FeS/MoS2 Composite As a High Performance Anode for Sodium-Ion Batteries

Stable Li+/Na+ Batteries with Anodes Boosted by Hollow Tubular-Structured MoS2 Nanosheet/N-Doped Carbon Nanosheet Composites

Hollow Mo2C Nanofibers Improve the Electrochemical Performance of Cathode for Lithium-Sulfur Battery

1T MoS 2 growth from exfoliated MoS 2 nucleation as high rate anode for sodium storage

One-pot synthesis of hierarchical Co1–S/NC@MoS2/C hollow nanofibers based on one-dimensional metal coordination polymers for enhanced lithium and sodium-ion storage

Vertically Aligned MoS2 Nanosheets with Increased Interlayer Spacing on Hollow Polypyrrole Nanotubes for Enhanced Lithium and Sodium Storage Performance

Chemical activation of hollow carbon nanospheres induced self-assembly of metallic 1T phase MoS2 ultrathin nanosheets for electrochemical lithium storage

Stable Li + /Na + Batteries with Anodes Boosted by Hollow Tubular-Structured MoS 2 Nanosheet/N-Doped Carbon Nanosheet Composites

Hollow nanorods MoS2@SnS heterojunction for sodium storage with enhanced cyclic stability

Preparation and Electrochemical Properties of MoS2/C Hollow Microspheres

Hollow Co–Mo–Se nanosheet arrays derived from metal-organic framework for high-performance supercapacitors

1T-Phase MoS2 with large layer spacing supported on carbon cloth for high-performance Na+ storage