A 5.12-Ghz LC-based Phase-Locked Loop for Silicon Pixel Readouts of High-Energy Physics
Li Xiao-Ting,Wei,Zhang Ying,Yan Xiong-Bo,Jiang Xiao-Shan,Yang Ping
DOI: https://doi.org/10.1007/s41365-022-01074-2
2022-01-01
Nuclear Science and Techniques
Abstract:There is an urgent need for high-quality and high-frequency clock generators for high-energy physics experiments. The transmission data rate exceeds 10 Gbps for a single channel in future readout electronics of silicon pixel detectors. Others, such as time measurement detectors, require a high time resolution based on the time-to-digital readout architecture. A phase-locked loop (PLL) is an essential and broadly used circuit in these applications. This study presents an application-specific integrated circuit of a low-jitter, low-power LC-tank that is PLL fabricated using 55-nm CMOS technology. It includes a 3rd-order frequency synthesis loop with a programmable bandwidth, a divide-by-2 pre-scaler, standard low-voltage differential signaling interfaces, and a current mode logic (CML) driver for clock transmissions. All the d-flip-flop dividers and phase-frequency detectors are protected from single-event upsets using the triple modular redundancy technique. The proposed VCO uses low-pass filters to suppress the noise from bias circuits. The tested LC-PLL covers a frequency locking range between 4.74 GHz and 5.92 GHz with two sub-bands. The jitter measurements of the frequency-halved clock (2.56 GHz) are less than 460 fs and 0.8 ps for the random and deterministic jitters, respectively, and a total of 7.5 ps peak-to-peak with a bit error rate of 10(-12). The random and total jitter values for frequencies of 426 MHz and 20 MHz are less than 1.8 ps and 65 ps, respectively. The LC-PLL consumed 27 mW for the core and 73.8 mW in total. The measured results nearly coincided with the simulations and validated the analyses and tests.