Porous ZrNb24O62 nanowires with pseudocapacitive behavior achieve high-performance lithium-ion storage

Chao Yang,Yelong Zhang,Fan Lv,Chunfu Lin,Yao Liu,Kai Wang,Jianrui Feng,Xiaohong Wang,Yongjun Chen,Jianbao Li,Shaojun Guo

DOI: https://doi.org/10.1039/c7ta07347j

2017-01-01

J. Mater. Chem. A

Abstract:Highly Li+-conductive ZrNb24O62 is explored as a new intercalating pseudocapacitive anode material for boosting Li+-ion storage.

What problem does this paper attempt to address?

Porous ZrNb24O62 nanowires with pseudocapacitive behavior achieve high-performance lithium-ion storage

Chao Yang,Yelong Zhang,Fan Lv,Chunfu Lin,Yao Liu,Kai Wang,Jianrui Feng,Xiaohong Wang,Yongjun Chen,Jianbao Li,Shaojun Guo

DOI: https://doi.org/10.1039/c7ta07347j

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:The ever-increasing power and energy demands for modern consumer electronics and electric vehicles are driving the pursuit of energy-storage technologies beyond the current horizon. Pseudocapacitive charge storage is one of the most effective and promising approaches to fill this technology gap, owing to its potential to deliver both high power and energy densities. Typically, titanium niobium oxides (TiNbxO2+2.5x (x = 2, 5 and 24)) with intrinsic pseudocapacitance, high safety and theoretical capacities of 388-402 mA h g(-1) are recognized as promising anode materials for lithium-ion batteries. However, their poor conductivity and low Li+-ion diffusion coefficient are known to be the major hurdles limiting the full utilization of their pseudocapacitive effects, leading to their lackluster rate capabilities. Herein, we employ a facile electrospinning method to prepare one-dimensional hierarchically porous ZrNb24O62 nanowires (P-ZrNb24O62) with an ultra-large Li+-ion diffusion coefficient as a new intercalating pseudocapacitive material for boosting Li+-ion storage. The P-ZrNb24O62 exhibits excellent electrochemical performances, including a high reversible capacity (320 mA h g(-1) at 0.1C), safe working potential (similar to 1.67 V vs. Li/Li+), high initial coulombic efficiency (90.1%), outstanding rate capability (182 mA h g(-1) at 30C) and durable long-term cyclability (90.2% capacity retention over 1500 cycles).
Supporting Information Porous ZrNb24O62 Nanowires with Pseudocapacitive Behavior Achieve High-Performance Lithium-Ion Storage

Chao Yang,Yelong Zhang,Fan Lv,Chunfu Lin,Yao Liu,Kai Wang,Jianrui Feng,Xiaohong Wang,Yongjun Chen,Jianbao Li,Shaojun Guo

2017-01-01

Abstract:1State Key Laboratory of Marine Resource Utilization in South China Sea, College of Materials and Chemical Engineering, Hainan University, Haikou 570228, Hainan, China. 2Department of Materials Science and Engineering, College of Engineering, Peking University, Beijing 100871, China. 3BIC-ESAT, College of Engineering, Peking University, Beijing 100871, China. 4Key Lab of Theory and Technology for Advanced Battery Materials, College of Engineering, Peking University, Beijing 100871, China. 5Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, Fudan University, Shanghai 200433, China.
Pseudocapacitance-Enhanced Li-Ion Microbatteries Derived by a TiN@TiO2 Nanowire Anode

Wei Wen,Jin-Ming Wu,Yin-Zhu Jiang,Lu-Lu Lai,Jian Song

DOI: https://doi.org/10.1016/j.chempr.2017.01.004

IF: 23.5

2017-01-01

Chem

Abstract:Titanium dioxide (TiO2) has been studied extensively as a stable, cheap, and safe anode material for Li-ion batteries. However, the inherent sluggish Li-ion diffusion and particularly poor electronic conductivity limit its practical applications. Here, we report a core/shell TiN/TiO2 nanowire array to tackle these problems. The single-crystal-like TiN nanowire cores function as highly conductive nanostructured current collectors, and the branched shell is constructed by nanoporous anatase TiO2 mesocrystals. This 3D nanoarray electrode exhibits a pseudocapacitity-dominated charge storage of lithium ions with outstanding performance in terms of high areal and volumetric capacity, fast charge-discharge ability, and long cycling lifetime. Charge transport through the unique nanoporous TiO2 mesocrystal shells and the high-conductivity TiN nanowire core account for the superior performance.
Porous Znco2o4 Nanowires Synthesis Via Sacrificial Templates: High-Performance Anode Materials Of Li-Ion Batteries

Ning Du,Yanfang Xu,Hui Zhang,Jingxue Yu,Chuanxin Zhai,Deren Yang

DOI: https://doi.org/10.1021/ic102129w

IF: 4.6

2011-01-01

Inorganic Chemistry

Abstract:A simple microemulsion-based method has been developed to synthesize ZnCo2(C2O4)(3) nanowires that can be transformed to porous ZnCo2O4 nanowires under annealing conditions. The morphology of porous ZnCo2O4 nanowires can be tuned by the initial ZnCo2(C2O4)(3) nanowires and the annealing temperatures. The as-synthesized porous ZnCo2O4 nanowires have been applied as anode materials of Li-ion batteries, which show superior capacity and cycling performance. The porous one-dimensional (ID) nanostructures and large surface area are responsible for the superior performance. Moreover, it is indicated that porous ZnCo2O4 nanowires synthesized at low annealing temperature (500 degrees C) show larger capacity and better cycling performance than that prepared at high annealing temperature (700 degrees C), because of their higher porosity and larger surface area.
Cr0.5Nb24.5O62 Nanowires with High Electronic Conductivity for High-Rate and Long-Life Lithium-Ion Storage

Chao Yang,Shu Yu,Chunfu Lin,Fan Lv,Shunqing Wu,Yong Yang,Wei Wang,Zi-Zhong Zhu,Jianbao Li,Ning Wang,Shaojun Guo

DOI: https://doi.org/10.1021/acsnano.7b01163

IF: 17.1

2017-04-25

ACS Nano

Abstract:Intercalation-type TiNbxO2+2.5x (x = 2, 5, and 24) anode materials have recently become more interesting for lithium-ion batteries (LIBs) due to their large theoretical capacities of 388-402 mAh g-1. However, the Ti4+/Nb5+ ions in TiNbxO2+2.5x with empty 3d/4d orbitals usually lead to extremely low electronic conductivity of <10-9 S cm-1, greatly restricting their practical capacity and rate capability. Herein, we report a class of highly conductive Cr0.5Nb24.5O62 nanowires as an intercalation-type anode material for high-performance LIBs. The as-made Cr0.5Nb24.5O62 nanowires show an open shear ReO3 crystal structure (C2 space group) with 4% tetrahedra and a conducting characteristic with ultrahigh electronic conductivity of 3.6 × 10-2 S cm-1 and a large Li+-ion diffusion coefficient of 2.19 × 10-13 cm2 s-1. These important characteristics make them deliver outstanding electrochemical properties in term of the largest reversible capacity (344 mAh g-1 at 0.1 C) in all the known niobium- and titanium-based anode materials, safe working potential (∼1.65 V vs Li/Li+), high first-cycle Coulombic efficiency (90.8%), superior rate capability (209 mAh g-1 at 30 C), and excellent cycling stability, making them among the best for LIBs in niobium- and titanium-based anode materials.
Electrochemical reaction mechanism of porous Zn2Ti3O8 as a high-performance pseudocapacitive anode for Li-ion batteries

Weijie Cheng,Qi Feng,Zhanglin Guo,Guanjun Chen,Yong Wang,Lixiong Yin,Jiayin Li,Xingang Kong

DOI: https://doi.org/10.1016/j.cclet.2022.01.002

IF: 9.1

2022-01-01

Chinese Chemical Letters

Abstract:Zn2Ti3O8, as a new type of anode material for lithium-ion batteries, is attracting enormous attention because of its low cost and excellent safety. Though decent capacities have been reported, the electrochemical reaction mechanism of Zn2Ti3O8 has rarely been studied. In this work, a porous Zn2Ti3O8 anode with considerably high capacity (421 mAh/g at 100 mA/g and 209 mAh/g at 5000 mA/g after 1500 cycles) was reported, which is even higher than ever reported titanium-based anodes materials including Li4Ti5O12, TiO2 and Li2ZnTi3O8. Here, for the first time, the accurate theoretical capacity of Zn2Ti3O8 was confirmed to be 266.4 mAh/g. It was also found that both intercalation reaction and pseudocapacitance contribute to the actual capacity of Zn2Ti3O8, making it possibly higher than the theoretical value. Most importantly, the porous structure of Zn2Ti3O8 not only promotes the intercalation reaction, but also induces high pseudocapacitance capacity (225.4 mAh/g), which boosts the reversible capacity. Therefore, it is the outstanding pseudocapacitance capacity of porous Zn2Ti3O8 that accounts for high actual capacity exceeding the theoretical one. This work elucidates the superiorities of porous structure and provides an example in designing high-performance electrodes for lithium-ion batteries.

chemistry, multidisciplinary
Electrospinning In0.5Nb24.5O62 nanofibers as a novel anode host with superior lithium storage performance

Mingru Su,Yingying Lei,Kuidong He,Kai Fu,Xueli Chen,Aichun Dou,Yu Zhou,Yunjian Liu

DOI: https://doi.org/10.1016/j.electacta.2023.142828

IF: 6.6

2023-09-01

Electrochimica Acta

Abstract:Nb2O5 represents a promising anode material for lithium-ion batteries (LIBs), but its practical applications are currently hampered by its poor conductivity of niobium-based oxides during the charge-discharge process. Herein, In0.5Nb24.5O62 nanofibers with good electrochemical performance were prepared by a simple electrospinning process for the first time in this work. The doping of indium endows the material with good structural stability and high apparent lithium-ion diffusion rate. The morphology is composed of nanostructured In0.5Nb24.5O62 crosslinked nanofibers. XRD results show that In0.5Nb24.5O62 calcined at 800 °C are consistent with the orthorhombic Nb2O5 phase, while the samples calcined above 800 °C present the monoclinic structure. The charge capacity of In0.5Nb24.5O62 can achieve 170 mAh g-1 at 20 C and remains 90% after 200 cycles. This work provides insights into the design and optimization of a high-capacity and high-power Nb2O5 anode material and focuses on research toward the crystalline structure analyses, electrochemical reaction mechanisms, and modification strategies.

electrochemistry
Phosphorus-doped TiO2-B Nanowire Arrays Boosting Robust Pseudocapacitive Properties for Lithium Storage

Minglei Cao,Leiming Tao,Xiaowei Lv,Yi Bu,Man Li,Hong Yin,Mingqiang Zhu,Zhicheng Zhong,Yan Shen,Mingkui Wang

DOI: https://doi.org/10.1016/j.jpowsour.2018.06.012

IF: 9.2

2018-01-01

Journal of Power Sources

Abstract:TiO2-B has received increasing interest as a possible anode for lithium-ion batteries, but its properties are restricted by the intrinsically low electronic conductivity. Herein, we first demonstrate that phosphorus doping can be an efficient approach to boost the pseudocapacitive properties of TiO2-B nanowire arrays. The phosphorus doping not only promotes electronic conductivity of TiO2-B nanowire arrays by modifying their electronic structure, but also significantly enhances the electrochemical surface reactivity. Density functional theory calculations further reveal that the phosphorus doping could improve the surface lithium affinity of TiO2-B nanowire arrays. Consequently the phosphorus-doped TiO2-B nanowire arrays simultaneously exhibit high reversible capacity (350.9 mAh g(-1)), remarkable rate capability (142.6 mAh g(-1 )at 30 C), and impressive cyclability (approximately 80% capacity retention efficiency over 3000 continuous cycles at 10 C), holding promise in high-energy and high-power lithium-ion batteries application.
High-pseudocapacitance of porous and square NiO@NC nanosheets for high-performance lithium-ion batteries

Ze-Lin Cai,Zi-Lin Peng,Meng-Qi Wang,Jia-Yan Wu,Hao-Sen Fan,Yu-Fei Zhang

DOI: https://doi.org/10.1007/s12598-020-01630-y

IF: 6.318

2021-01-07

Rare Metals

Abstract:Layered nickel oxides have been focused with intense research interests as high-performance lithium-ion batterie (LIB) anode. However, it is hard to obtain few layered nickel oxides material directly as it easily forms bulk material with the strong interaction between the interlayer. In this work, two-dimensional (2D) nickel-based coordination polymers were successfully prepared according to aqueous phase copolymerization approach. And then uniform carbon-doped NiO nanosheets were successfully obtained from facile solution assembly and post-thermal treatment. The detailed electrochemical testing shows that the uniform NiO nanocrystals encapsulated into porous N-doped carbon (NiO@NC) nanosheets present much higher rate capability with the discharge specific capacity of 782.7 mAh·g−1 at high current density of 2.0 A·g−1 than pure NiO (690 mAh·g−1). It also shows long-term cycling performance with 91% retention after 50 cycles at 1.0 A·g−1. The high rate capability, cycling stability and the easy synthesis make NiO@NC nanosheets as a promising candidate for LIB anode and build up new way for the fabrication of metal oxides anode materials.

materials science, multidisciplinary,metallurgy & metallurgical engineering
High-rate Electrochemical Lithium-Ion Storage Through Li+ Intercalation Pseudocapacitance in the Pr1/3NbO3 Anode

Guisheng Liang,Liting Yang,Xuhui Xiong,Xianhu Liu,Xuefeng Zhang,Renchao Che

DOI: https://doi.org/10.1039/d2ta03741f

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:The significant Li+ intercalation pseudocapacitive behavior of the Pr1/3NbO3 anode enables fast- and stable-Li+ storage.
High-rate electrochemical lithium-ion storage through Li + intercalation pseudocapacitance in the Pr 1/3 NbO 3 anode

Guisheng Liang,Liting Yang,Xuhui Xiong,Xianhu Liu,Xuefeng Zhang,Renchao Che

DOI: https://doi.org/10.1039/d2ta03741f

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:The significant Li + intercalation pseudocapacitive behavior of the Pr 1/3 NbO 3 anode enables fast- and stable-Li + storage.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Insert Zn Nanoparticles into the 3D Porous Carbon Ultrathin Films as a Superior Anode Material for Lithium Ion Battery

Xuan Wu,Zheng Xing,Yulong Zhao,Xiujun Qi,Hong Wang,Wei Zhao,Yongli Cui,Zhicheng Ju

DOI: https://doi.org/10.1002/ppsc.201700355

2018-01-15

Abstract:A flexible strategy is exploited to insert Zn nanoparticles into the pores of highly stable 3D network of carbon ultrathin films (P‐Zn/C) that can effectively localize the postformed Zn nanoparticles, thereby solving the problem of structural degradation, and thus achieve improved anode performance. A maximum capacity of 657.3 mA h g−1 at a current density of 200 mA g−1 after 50 cycles is achieved for P‐Zn/C. Even at a high current density of 2 A g−1, a capacity of 653 mA h g−1 is maintained after 1000 cycles, indicating that it could be a promising anode for lithium ion batteries. By comparing the capacitive and diffusion contribution qualitatively and quantitatively, the result reveals that the enhanced electrochemical performance mainly originates from the pseudocapacitance storage mechanism. The Zn nanoparticles completely embedded in 3D porous carbon ultrathin films are obtained by a facile solid‐state synthesis. This novel 3D structure relieves the intense volume expansion of inner Zn alloying and enhances the stability of the structure. As an anode material of Li‐ion batteries, it shows excellent electrochemical performance.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Empowering lithium-ion storage: unveiling the superior performance of niobium-based oxide/perovskite heterojunction with built-in electric field

Yongkang Chen,Haoyan Cheng,Ruohan Liu,Wenhao Tai,Bo Sun,Jiahui Chen,Chang Lu,Kexing Song,Hao Hu

DOI: https://doi.org/10.1016/j.jcis.2024.08.023

Abstract:The increasing demand for high-performance electrode materials in lithium-ion batteries has driven significant attention towards Nb2O5 due to its high working voltage, large theoretical capacity, environmental friendliness, and cost-effectiveness. However, inherent drawbacks such as poor electrical conductivity and sluggish electrochemical reaction kinetics have hindered its lithium storage performance. In this study, we introduced KCa2Nb3O10 into Nb2O5 to form a heterojunction, creating a built-in electric field to enhance the migration and diffusion of Li+, effectively promoting electrochemical reaction kinetics. Under the regulation of the built-in electric field, the charge transfer resistance of the KCa2Nb3O10/Nb2O5 anode decreased by 3.4 times compared to pure Nb2O5, and the Li+ diffusion coefficient improved by two orders of magnitude. Specifically, the KCa2Nb3O10/Nb2O5 anode exhibited a high capacity of 276 mAh g-1 under 1 C, retaining a capacity of 128 mAh g-1 even at 100 C. After 3000 cycles at 25 C, the capacity degradation was only 0.012% per cycle. Through combined theoretical calculations and experimental validation, it was found that the built-in electric field induced by the heterojunction interface contributed to an asymmetric charge distribution, thereby improving the rates of charge and ion migration within the electrode, ultimately enhancing the electrochemical performance of the electrode material. This study provides an effective approach for the rational design of high-performance electrode materials.
Rational Design of Core‐Shell ZnTe@N‐Doped Carbon Nanowires for High Gravimetric and Volumetric Alkali Metal Ion Storage

Shuanggui Zhang,Lifeng Qiu,Yang Zheng,Qiufan Shi,Tengfei Zhou,Vitor Sencadas,Yuling Xu,Shilin Zhang,Longhai Zhang,Chaofeng Zhang,Chuan‐Ling Zhang,Shu‐Hong Yu,Zaiping Guo

DOI: https://doi.org/10.1002/adfm.202006425

IF: 19

2020-10-07

Advanced Functional Materials

Abstract:Among the various semiconductor materials, zinc telluride possesses the lowest electron affinity and ultrafast charge separation capability, facilitating improved charge transfer kinetics. In addition, ZnTe has a relatively high density, contributing to high volumetric capacity. Here, 1D N‐doped carbon‐coated ZnTe core‐shell nanowires (ZnTe@C) are designed and prepared via a facile ion‐exchange and carbonization technique. When evaluated as anode for metal ion batteries, it demonstrates superior electrochemical performance in both Li and Na ion storage, including high gravimetric and volumetric capacities (1119 mA h g−1 and 906 mA h cm−3, respectively, at 100 mA g−1 for Li ion storage), excellent high‐rate capability, and long‐term cycling stability. This remarkable electrochemical performance is attributed to the low electron affinity and high density of ZnTe, and the amorphous nature of the N‐doped carbon layer in the heterostructured ZnTe@C nanowires, which not only provide fast charge transfer paths, but also effectively maintain the structural and electrical integrity of the ZnTe. The strategy of embedding high density and high‐performance active materials in highly conductive nanostructures represents an effective way of achieving electrode materials with excellent gravimetric and volumetric capacities towards superior energy storage systems.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Hierarchical Porous N-Doped Carbon Nanofibers with Encapsulated Li 3 VO 4 Nanoparticles for Lithium-Ion Storage

Song Yang,Cunyuan Pei,Dongmei Zhang,Bing Sun,Pengju Li,Tao Li,Shibing Ni

DOI: https://doi.org/10.1021/acsanm.3c04919

IF: 6.14

2024-01-03

ACS Applied Nano Materials

Abstract:Lithium vanadium oxide (Li3VO4) is a highly promising anode material for lithium-ion batteries due to its high theoretical capacity and moderate operation voltage. However, its low intrinsic electronic conductivity leads to an undesirable rate capability and restricts its practical applications. To address this issue, we designed a structure of hierarchical porous carbon network-wrapped Li3VO4 nanoparticles to enhance the overall electrochemical performance, especially at high rates. Polyacrylonitrile (PAN) and poly(methyl methacrylate) (PMMA) were employed as carbon sources and porous templates during the electrospinning and subsequent calcination processes. This approach can enhance the electronic conductivity, improve the contact area between Li3VO4 and the electrolyte, and decrease the ion/electron diffusion path. As a result, the constructed hierarchical porous N-doped C nanofiber-encapsulated Li3VO4 nanoparticles (P-LVO/NC NFs) exhibited an ultrahigh discharge capacity of 1039.5 mA h g–1 and a stable capacity of 736.8 mA h g–1 after 500 cycles at 0.5 A g–1. Furthermore, they demonstrated an outstanding rate capability of 397.7 mA h g–1 and at 5.0 A g–1. The unique hierarchical porous structure provided excellent reaction kinetics, resulting in exceptional Li-ion storage performance. Therefore, the fabricated P-LVO/NC NFs hold great potential as high-performance anode materials.

materials science, multidisciplinary,nanoscience & nanotechnology
Cr2S3 nanosheet grafted with porous N-doped carbon architecture as an anode with enhanced Li-storage property

Xia Zeng,Jing Chen,Lin Ma,Chen Chen,Yuan Yuan,Lusheng Liao,Ziyun Peng,Liyi Zheng,Yilin Huang,Jie Peng,Guixun Yang,Yanjie Xi

DOI: https://doi.org/10.1016/j.jallcom.2023.171617

IF: 6.2

2023-12-01

Journal of Alloys and Compounds

Abstract:Chromium-based transition metal sulfide such as chromium hemi trisulfide (Cr2S3) gradually emerges as a potential lithium-ion host material considering its relatively large specific capacity along with low cost advantage. However, some excruciating issues such as serious particle aggregation, large volume expansion and insufficient inherent conductivity always result in an inferior Li-storage behavior such as low reversible capacity, limited cycling life and poor high-rate performance. Rational structure design and effective combination with suitable component are crucial to achieve superior Li-storage performance. Herein, a heterostructured composite with small Cr2S3 nanosheets embedded into phenanthroline-derived N-doped porous carbon skeleton (Cr2S3/NC) has been synthesized through a calcination and sulfuration route. In as-prepared Cr2S3/NC composite, Cr2S3 nanosheets are well confined by carbon matrix, which is conductive to an effective suppression on aggregation and volume change. Meanwhile, porous conductive carbon framework supplies desirable expressway for fast electron delivery and reduces the distance for lithium ions diffusion. Consequently, the Cr2S3/NC anode delivers a remarkably elevated Li-storage performance.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
In situ XRD and electrochemical investigation on a new intercalation-type anode for high-rate lithium ion capacitor

Bobo Zou,Ting Wang,Shengyuan Li,Rong Kang,Guochun Li,Sherif A. El-Khodary,Dickon H.L. Ng,Xianhu Liu,Jingxia Qiu,Yan Zhao,Jiabiao Lian,Huaming Li

DOI: https://doi.org/10.1016/j.jechem.2020.08.037

IF: 13.1

2021-06-01

Journal of Energy Chemistry

Abstract:A new intercalation-type anode material is reported herein to improve the lithium storage kinetics for high-rate lithium ion capacitors. The crystal structure of orthorhombic NaNbO3 indicates two possible tunnels for lithium ions insertion into NaNbO3 host along the <101> and <141> directions. Moreover, in situ XRD is conducted to investigate the lithium storage mechanism and structural evolution of the NaNbO3 anode, demonstrating its intercalation behavior through (101) and (141) planes. Furthermore, the rGO nanosheets are introduced to facilitate the charge transfer, which also effectively prevent the aggregation of NaNbO3 nanocubes. As expected, the NaNbO3/rGO nanocomposites possess remarkable reversible capacity (465 mA h g−1 at 0.1 A g−1), superior rate capability (325 mA h g−1 at 1.0 A g−1) and cycling stability, attributed to their synergistic effect and high Li+ diffusion coefficient DLi [D(NaNbO3/rGO)/D(NaNbO3) ≈ 31.54]. Remarkably, the NaNbO3/rGO-based LIC delivers a high energy density of 166.7 W h kg−1 at 112.4 W kg−1 and remains 24.1 W h kg−1 at an ultrahigh power density of 26621.2 W kg−1, with an outstanding cycling durability (90% retention over 3000 cycles at 1.0 A g–1). This study provides new insights on novel intercalation-type anode material to enrich the materials system of LICs.

chemistry, physical,engineering, chemical, applied,energy & fuels
Pseudocapacitance‐dominated MnNb2O6‐C nanofiber anode for Li‐ion batteries

Kangzhe Cao,Sitian Wang,Jiahui Ma,Xiaobing Xing,Xiaogang Liu,Yong Jiang,Yang Fan,Huiqiao Liu

DOI: https://doi.org/10.1002/cssc.202301065

IF: 8.4

2023-10-05

ChemSusChem

Abstract:MnNb2O6 anode has attracted much attention owing to its unique properties for holding Li ions. Unluckily, its application as a Li‐ion battery anode is restricted by low capacity because of the inferior electronic conductivity and limited electron transfer. Previous studies suggest that structure and component optimization could improve its reversible capacity. This improvement is always companied by capacity increments, however, the reasons have rarely been identified. Herein, MnNb2O6‐C nanofibers (NF) with MnNb2O6 nanoparticles (~15 nm) confined in carbon NF, and the counterpart MnNb2O6 NF consisting of larger nanoparticles (40‐100 nm) are prepared by electrospinning for clarifying this phenomenon. The electrochemical evaluations indicate that the capacity achieved by the MnNb2O6 NF electrode presents an activation process and a degradation in subsequence. Meanwhile, the MnNb2O6‐C NF electrode delivers high reversible capacity and ultra‐stable cycling performance. Further analysis based on electrochemical behaviors and microstructure changes reveals that the partial structure rearrangement should be in charge of the capacity increment, mainly including pseudocapacitance increment. This work suggests that diminishing the dimensions of MnNb2O6 nanoparticles and further confining them in a matrix could increase the pseudocapacitance‐dominated capacity, providing a novel way to improve the reversible capacity of MnNb2O6 and other intercalation reaction anodes.

chemistry, multidisciplinary,green & sustainable science & technology
Hybrid coating SnO2 for enhanced Li ions storage

Yanan Gao,Jie Liu,Chenjie Lou,Hailiang Geng,Jipeng Fu,Chengyu Li,Yongjin Chen,Cong Wang,Wenda Zhang,Xiaojun Kuang,Yifan Liu,Xiang Gao,Mingxue Tang

DOI: https://doi.org/10.1016/j.cclet.2023.108268

IF: 9.1

2023-03-01

Chinese Chemical Letters

Abstract:Anode SnO2 in lithium-ion batteries suffers from volume expansion and agglomeration. Here, the SnO2 nanoparticles are hybrided with ZrO2 particles by the support of carbon nanotube networks. The obtained SnO2/C/ZrO2 composite shows improved electrochemical performances. Investigations reveal that the carbon nanotubes shorten the transmission path of electrons and Li+ ions. Ball milling with ZrO2 promotes the formation of nanosized SnO2 to weaken the internal strain change, being beneficial to buffering volume change during electrochemical cycling afterwards. High-resolution 6,7Li NMR investigations indicate that conversion and alloying reactions are stepwise involved for SnO2/C/ZrO2 anode. The strategy of designing SnO2/C/ZrO2 composite from the morphology-controlled metal-organic frameworks for energy storage widens the possibility to fabricate promising materials with enhanced performances.

chemistry, multidisciplinary
Polyvinylpyrrolidone-assisted synthesis of ultrathin multi-nanolayered Cu2Nb34O87-x for advanced Li+ storage

Qing Li,Dan Zhao,Shijie Sun,Xing Zhang,Yu Zhang,Chao Li,Yifeng Cheng,Jincang Zhang,Renchao Che

DOI: https://doi.org/10.1016/j.jcis.2023.11.155

Abstract:The ultrathin multi-nanolayered structure with ultrathin monolayer thickness (<10 nm) and certain interlayer spacing can significantly shorten Li+ paths and alleviate the volume effect for Li+-storage materials. However, unlike layered materials such as MXene and MoS2, shear ReO3-type niobates have difficulty forming ultrathin multi-nanolayered structures due to their crystal structures, which still remains a challenge. Herein, by a polyvinylpyrrolidone (PVP)-assisted solvothermal method, we first synthesize ultrathin multi-nanolayered Cu2Nb34O87-x with oxygen vacancies composed of ultrathin nanolayers (2-10 nm in thickness) and interlayer spacing (1-5 nm). Oxygen vacancies can radically enhance the inherent electronic/ionic conductivity and Li+ diffusion coefficient of this material. The PVP-induced formation mechanism of this material is expounded in detail. The well-preserved ultrathin multi-nanolayered structure and excellent multi-electron electrochemical reversibility (Nb5+ ↔ Nb4+ ↔N b3+ and Cu2+ ↔ Cu+) of this material during cycling are fully verified. Based on an ultrathin multi-nanolayered structure and oxygen vacancies, this material as the anode of lithium-ion batteries is highly competitive among reported shear ReO3-type Cu-Nb-O anodes, displaying a high reversible capacity (315.3 mAh g-1 after 300 cycles at 1 C), durable cycling stability (85.7 % capacity retention after 1000 cycles at 10 C), and outstanding rate performance. Moreover, the application of this material to lithium-ion capacitors generates a large energy density (97.9 Wh kg-1 at 87.5 W kg-1) and a high power density (17,500 W kg-1 at 12.6 Wh kg-1), thus further indicating its fast faradaic pseudocapacitive behavior for practical applications. The results of this work indicate a breakthrough in synthesizing ultrathin multi-nanolayered shear ReO3-type niobates.

Porous ZrNb<sub>24</sub>O<sub>62</sub> nanowires with pseudocapacitive behavior achieve high-performance lithium-ion storage

Porous ZrNb24O62 nanowires with pseudocapacitive behavior achieve high-performance lithium-ion storage

Supporting Information Porous ZrNb24O62 Nanowires with Pseudocapacitive Behavior Achieve High-Performance Lithium-Ion Storage

Pseudocapacitance-Enhanced Li-Ion Microbatteries Derived by a TiN@TiO2 Nanowire Anode

Porous Znco2o4 Nanowires Synthesis Via Sacrificial Templates: High-Performance Anode Materials Of Li-Ion Batteries

Cr0.5Nb24.5O62 Nanowires with High Electronic Conductivity for High-Rate and Long-Life Lithium-Ion Storage

Electrochemical reaction mechanism of porous Zn2Ti3O8 as a high-performance pseudocapacitive anode for Li-ion batteries

Electrospinning In0.5Nb24.5O62 nanofibers as a novel anode host with superior lithium storage performance

Phosphorus-doped TiO2-B Nanowire Arrays Boosting Robust Pseudocapacitive Properties for Lithium Storage

High-pseudocapacitance of porous and square NiO@NC nanosheets for high-performance lithium-ion batteries

High-rate Electrochemical Lithium-Ion Storage Through Li+ Intercalation Pseudocapacitance in the Pr1/3NbO3 Anode

High-rate electrochemical lithium-ion storage through Li + intercalation pseudocapacitance in the Pr 1/3 NbO 3 anode

Insert Zn Nanoparticles into the 3D Porous Carbon Ultrathin Films as a Superior Anode Material for Lithium Ion Battery

Empowering lithium-ion storage: unveiling the superior performance of niobium-based oxide/perovskite heterojunction with built-in electric field

Rational Design of Core‐Shell ZnTe@N‐Doped Carbon Nanowires for High Gravimetric and Volumetric Alkali Metal Ion Storage

Hierarchical Porous N-Doped Carbon Nanofibers with Encapsulated Li 3 VO 4 Nanoparticles for Lithium-Ion Storage

Cr2S3 nanosheet grafted with porous N-doped carbon architecture as an anode with enhanced Li-storage property

In situ XRD and electrochemical investigation on a new intercalation-type anode for high-rate lithium ion capacitor

Pseudocapacitance‐dominated MnNb2O6‐C nanofiber anode for Li‐ion batteries

Hybrid coating SnO2 for enhanced Li ions storage

Polyvinylpyrrolidone-assisted synthesis of ultrathin multi-nanolayered Cu2Nb34O87-x for advanced Li+ storage