Abstract:Dressing is used to protrude the micron-scale grains from wheel bond, but the grain protrusion height is not identical due to the irregular grain shape and distribution. In order to assure the grain uniformity with identical protrusion height, the electro-contact discharge (ECD) truncating is proposed after dressing. In the ECD truncating, an in-air impulse discharge thermal between wheel and electrode is transferred to cutting interface of diamond grain through the cutting chip. Accordingly, the outstanding thermal conductivity of diamond is utilized to perform a mechanical and thermochemical removal of grain edge layer without any damage to its hardness. The objective is to realize an efficient truncating of coarse diamond wheel for dry smooth grinding of hardened steel. First, a constant-voltage/constant-current transform was employed to suppress the short-circuiting current between wheel and electrode and to adjust the discharge thermal to diamond grain surface. Then the grain temperature distribution was modeled with reference to the transfer of impulse discharge thermal to cutting interface for diamond graphitization. Finally, the truncated diamond wheel was used to perform a grinding in contrast to general CBN wheel. It is shown that the spark-discharge thermal transferred from the rolled-up cutting chip to the grain cutting interface contributes to truncating. In in-air ECD truncating, the spark-discharge voltage ranges 19-23 V, which increases the grain truncating rate by 95% against the general arc-discharge. The truncating temperature may be maintained as about 626 degrees C to induce the layer graphitization of diamond grains with the mechanical and thermochemical removal up to about 6435 mu m(3)/min. In contrast to wet CBN grinding, the dry grinding greatly improves the ground surface with the truncated diamond wheel rather than the dressed one.

229 Precision Truing of Fine-Grained Metal-Bonded Diamond Grinding Wheel and Its Application to Ductile-Mode Grinding of Brittle Material

Arc Envelope Truing of Metal-Bonded Diamond Grinding Wheel by Use of Cone-Shaped Truer

Dry electro-contact discharge mutual-wear truing of micro diamond wheel V-tip for precision micro-grinding

On-machine dry electric discharge truing of diamond wheels for micro-structured surfaces grinding

Computer Simulation of Sub-Micron-scale Precision Truing of a Metal-Bonded Diamond Grinding Wheel

Precision Truing Of Diamond Wheel With Sharp Edge

On-machine Electric Discharge Truing of Small Ball-End Fine Diamond Grinding Wheels

Study on In-Air Electro-Contact Discharge (ECD) Truncating of Coarse Diamond Grinding Wheel for the Dry Smooth Grinding of Hardened Steel

Electrical Discharge Truing of a Vitrified Bonded Superabrasive Wheel with Electrical Conductivity

In-process Evaluation of Grit Protrusion Feature for Fine Diamond Grinding Wheel by Means of Electro-Contact Discharge Dressing

A Study on Surface Generation of Metal-Bonded Diamond Grinding Wheel Dressed by Electro-Contact Discharge

On-machine Precision Form Truing of Arc-Shaped Diamond Wheels

ELID Assisted Precision Conditioning of Coarse-Grained Diamond Grinding Wheel

Precision Truing of Arc-shaped Diamond Wheel and On-line Monitoring of Truing Processes by AE Signals

Experimental Investigation on Ultrasonic-Assisted Truing/dressing of Diamond Grinding Wheel with Cup-Shaped GC Wheel

Surface Discharging Assisted Truing and Dressing of Diamond Grinding Wheels

Experimental Study on Diamond Wheel V-tip Truing Using a Tangential Grinding Truing Method

Ultraprecision Ductile Grinding of Optical Glass Using Super Abrasive Diamond Wheel

Development and application of cup truer in advanced optical grinding

ELID Assisted Grinding of Optical Glass with Fine and Coarse Grained Copper-Resin Bonded Diamond Wheels

Precision dressing of arc-shaped coarse-grained diamond wheels via electrical discharge aided grinding technology