Abstract:In this paper, a liquid crystal display (LCD) photopolymerization method is proposed, and a vitrified bond diamond grinding wheel is successfully prepared. A high-performance vitrified bond was obtained by melting SiO2-B2O3-Al2O3-Na2O ceramic raw materials and used for grinding wheel preparation. LCD photopolymerization technology is characterized by high precision in shaping, fast processing speed, and superior quality, making it a promising technology for fabricating vitrified bond diamond grinding wheels. The preparation of vitrified bond slurry with high solid content and low viscosity was extensively investigated to meet the fabrication requirements. The effects of dispersant, the particle size of the vitrified bond, and solid content on the viscosity of the slurry were systematically analyzed. The vitrified bond slurry with solid content up to 65 wt.% (approximately 45.5 vol.%) was successfully prepared and met the requirements for printing. Furthermore, we explored the optimal formulation of the grinding wheel, debinding and sintering conditions, sintering temperature, grit-to-bond ratio, and the evaluation of the grinding performance of the wheel on hard and brittle materials, such as silicon carbide ceramic. Vitrified bond and abrasive slurry systems with a solid content of 65 wt.% (approximately 42.8 vol.%) were prepared. The results show that the vitrified bond diamond grinding wheel exhibits optimal comprehensive performance, with a sintering temperature of 680 °C and a grit-to-bond ratio of 4:6. The minimum surface roughness of the workpiece after grinding was 1.767 μm, the material removal rate was 5.08 mg/s, the grinding ratio was 9.78, and the friction coefficient was stabilized at about 0.5 during grinding. This paper guides the manufacturing of vitrified bond diamond grinding wheels via LCD photopolymerization.

Electrical Discharge Truing of a Vitrified Bonded Superabrasive Wheel with Electrical Conductivity

Grinding efficiency and profile accuracy of diamond grinding wheels dressed with wire electrical discharge conditioning (WEDC)

Fabrication of Vitrified Bond Diamond Grinding Wheel via LCD Photopolymerization

Research on the grinding performance of grinding wheel in the initial grinding stage after electric spark dressing of grinding wheel

Precision dressing of arc-shaped coarse-grained diamond wheels via electrical discharge aided grinding technology

Precision grinding of engineering ceramic based on the electrolytic dressing of a multi-layer brazed diamond wheel

A study on wear mechanism and wear reduction strategies in grinding wheels used for ELID grinding

Research on the bonding properties of vitrified bonds with porous diamonds and the grinding performance of porous diamond abrasive tools

Surface Integrity of Binderless WC Using Dry Electrical Discharge Assisted Grinding

Mirror Surface Grinding by Metal Bonded Super-abrasive Wheel with Electrolytic In-process Dressing

Edm Dressing of Fine Grain Super Abrasive Grinding Wheel

Investigating a novel and highly efficient approach for the fabrication of diamond profile rollers using Wire Electrical Discharge Conditioning (WEDC)

The Development of Dislodgement Free Diamond Electroplated Wheel for Engineering Ceramic Grinding Processes

Vitrified Metal Composite Bond for Diamond Grinding Tools Used for Silicon Carbide Wafer Thinning

Morphological evolution and grinding performance of vitrified bonded microcrystal alumina abrasive wheel dressed with a single-grit diamond

Adhesive wear mechanism under combined electric diamond grinding

Laser dressing of fine-grained metal-bonded diamond grinding wheels with concave surface

Experimental Study on Diamond Abrasive Layer Fabrication by Electrical Discharge Surface Intensifying

Investigation on the Preparation of Vitrified Bond CBN Grinding Tools

Electrolytic Adjustment Principle and Basic Appearance of Micro Diamond Powder Wheel with Resin-Metal Binder

Investigation of the Structure and Properties of Copper-Tin Bonding M2-01 in Diamond Grinding Wheel Introducing Additional Energy in the Form of Electric Discharges into the Processing Zone