Abstract:In the mirror surface grinding of fine ceramics with diamond grinding wheels, the truing/dressing of wheels must be frequently performed to maintain the shape accuracy and abrasive cutting-edge sharpness of the diamond grinding wheels to ensure a high processing efficiency and precision. For this purpose, a novel method is proposed for truing/dressing diamond grinding wheels in which a cup-shaped GC (Green silicon carbide) wheel is used as the truing/dressing tool and an ultrasonic vibration is applied axially to the diamond grinding wheel during truing/dressing. A truing/dressing device was designed and fabricated, and a series of experiments were conducted to systematically investigate the truing/dressing characteristics of metal–resin-bonded diamond grinding wheels. The following conclusions have been obtained. The truing/dressing force Fx is decreased with an increase of the ultrasonic amplitude. After truing/dressing, the performance of the grinding wheel has been significantly improved, including the improvement of shape accuracy and the increase in the number of effective abrasive particles per unit area with the assistance of ultrasonic vibrations during truing/dressing. Moreover, during truing/dressing, the introduction of the ultrasonic vibration reduced the abrasive grain cutting-edge apex angle, meaning that the sharpness of the grain cutting edge was improved by the ultrasonic vibrations. The truing/dressing ratio increased with an increase in the ultrasonic amplitude, leading to an extension of the servicing life of the cup-shaped GC wheel. Finally, a comparison of the performance of the grinding wheels trued/dressed with and without ultrasonic vibrations during the grinding of zirconia ceramics revealed that the grinding wheel trued/dressed with ultrasonic vibrations yielded an enhanced machined surface quality and lower grinding forces.

Precision Truing Of Diamond Wheel With Sharp Edge

On-machine Precision Form Truing of Arc-Shaped Diamond Wheels

An Edge Reversal Method for Precision Measurement of Cutting Edge Radius of Single Point Diamond Tools

On-Machine Truing of Diamond Wheel and High-Efficiency Grinding of Monocrystal Silicon for Aspheric Surface

Experimental Investigation on Ultrasonic-Assisted Truing/dressing of Diamond Grinding Wheel with Cup-Shaped GC Wheel

Improvement of precision grinding performance of CVD diamond wheels by micro-structured surfaces

Precision Grinding of a Microstructured Surface on Hard and Brittle Materials by a Microstructured Coarse-Grained Diamond Grinding Wheel

Online Monitoring of Truing Arc-Shaped Diamond Wheel by Acoustic Emission Signal

Pulse Laser Precision Truing of the V-shaped Coarse-Grained Electroplating CBN Grinding Wheel

Investigation of Surface and Subsurface Damage in Diamond Grinding of Optical Glass Using Hybrid Copper-Resin-Bonded Diamond Wheel

Thermal defects generation mechanism in laser precision dressing of metal-bonded micro-groove diamond wheel and their influence on grinding silicon wafer

On-machine Electric Discharge Truing of Small Ball-End Fine Diamond Grinding Wheels

Grinding damage of BK7 using copper-resin bond coarse-grained diamond wheel

Precision Truing of Electroplated Diamond Grinding Wheels Via Spray-Mist-assisted Laser Technology

Surface Discharging Assisted Truing and Dressing of Diamond Grinding Wheels

Ultra-precision Ductile Grinding of BK7 Using Super Abrasive Diamond Wheel

Ultraprecision Ductile Grinding of Optical Glass Using Super Abrasive Diamond Wheel

Preparation of surface micro-structured coarse-grained diamond wheels based on high efficiency mechanical conditioning and picosecond pulsed laser machining

Effects of kinematic parameters on electric discharge truing of small ball-end diamond wheels for small concave surfaces grinding

Precision dressing of arc-shaped coarse-grained diamond wheels via electrical discharge aided grinding technology

ELID Assisted Precision Conditioning of Coarse-Grained Diamond Grinding Wheel