Abstract:In the mirror surface grinding of fine ceramics with diamond grinding wheels, the truing/dressing of wheels must be frequently performed to maintain the shape accuracy and abrasive cutting-edge sharpness of the diamond grinding wheels to ensure a high processing efficiency and precision. For this purpose, a novel method is proposed for truing/dressing diamond grinding wheels in which a cup-shaped GC (Green silicon carbide) wheel is used as the truing/dressing tool and an ultrasonic vibration is applied axially to the diamond grinding wheel during truing/dressing. A truing/dressing device was designed and fabricated, and a series of experiments were conducted to systematically investigate the truing/dressing characteristics of metal–resin-bonded diamond grinding wheels. The following conclusions have been obtained. The truing/dressing force Fx is decreased with an increase of the ultrasonic amplitude. After truing/dressing, the performance of the grinding wheel has been significantly improved, including the improvement of shape accuracy and the increase in the number of effective abrasive particles per unit area with the assistance of ultrasonic vibrations during truing/dressing. Moreover, during truing/dressing, the introduction of the ultrasonic vibration reduced the abrasive grain cutting-edge apex angle, meaning that the sharpness of the grain cutting edge was improved by the ultrasonic vibrations. The truing/dressing ratio increased with an increase in the ultrasonic amplitude, leading to an extension of the servicing life of the cup-shaped GC wheel. Finally, a comparison of the performance of the grinding wheels trued/dressed with and without ultrasonic vibrations during the grinding of zirconia ceramics revealed that the grinding wheel trued/dressed with ultrasonic vibrations yielded an enhanced machined surface quality and lower grinding forces.

Effects of kinematic parameters on electric discharge truing of small ball-end diamond wheels for small concave surfaces grinding

On-machine Electric Discharge Truing of Small Ball-End Fine Diamond Grinding Wheels

Influences of Grinding Parameters on Forces in the Grinding of Microwave Ferrite Ceramic with Electroplated Diamond Wheel

Three-dimensional Modeling and Theoretical Investigation of Grinding Marks on the Surface in Small Ball-End Diamond Wheel Grinding

Effects of Geometric and Spindle Errors on the Quality of End Turning Surface

Ultra-precision grinding machine design and application in grinding the thin-walled complex component with small ball-end diamond wheel

Experimental Investigation on Ultrasonic-Assisted Truing/dressing of Diamond Grinding Wheel with Cup-Shaped GC Wheel

Configuration Design and Accuracy Analysis of Special Grinding Machine for Thin-Walled Small Concave Surfaces

On-machine Precision Form Truing of Arc-Shaped Diamond Wheels

Modeling and experimental study on the grinding performance of precision diamond grinding tool with defined texture

Interference and grinding characteristics in ultra-precision grinding of thin-walled complex structural component using a ball-end grinding wheel

Surface Discharging Assisted Truing and Dressing of Diamond Grinding Wheels

Kinematic Modeling of Surface Topography Ground by an Electroplated Diamond Wheel

Effect of Incident Angle on Laser Processing of a Small Vitrified CBN Grinding Wheel

Investigation of Internal Ultrasonically Assisted Grinding of Small Holes: Effect of Ultrasonic Vibration in Truing and Dressing of Small CBN Grinding Wheel

Wear Characteristics of Small Ball-End Fine Diamond Grinding Pins Dressed by On-Machine Electrical Discharge

Three-dimensional Characterization and Modeling of Diamond Electroplated Grinding Wheels

Analysis of Temperature Field for Laser Assisted Mechanical Dressing and Truing of Diamond Grinding Wheel

Precision Truing of Electroplated Diamond Grinding Wheels Via Spray-Mist-assisted Laser Technology

An Investigation of the Surface Waviness Features of Ground Surface in Parallel Grinding Process

Pulse Laser Precision Truing of the V-shaped Coarse-Grained Electroplating CBN Grinding Wheel