Membrane destruction-mediated antibacterial activity of tungsten disulfide (WS2)

Xu Liu,Guangxin Duan,Weifeng Li,Zhufa Zhou,Ruhong Zhou

DOI: https://doi.org/10.1039/c7ra06442j

IF: 4.036

2017-01-01

RSC Advances

Abstract:Tungsten disulfide (WS2) demonstrates clear antibacterial activity through inducing mechanical damage to the bacteria membrane integrity.

What problem does this paper attempt to address?

uction-mediated antibacterial activity of tungsten disul fi de ( WS 2 )

Xu Liu,Guangxin Duan,Weifeng Li,Zhufa Zhou,Ruhong Zhou

2017-01-01

Abstract:The antibacterial activities of tungsten disulfide (WS2) nanosheets against two representative bacterial strains: Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) were evaluated by colony-forming unit (CFU) studies. The WS2 samples demonstrate a time and concentration dependent antibacterial activity (retardation of bacterial growth) for both bacterial strains. Morphology analyses reveal that WS2 nanosheets adhere to the bacterial surfaces, resulting in robust inhibition of cell proliferation once a bacterium is fully covered with this nanomaterial. More importantly, the intimate contact of WS2 nanosheets with a bacterium cell membrane can cause serious damage to the membrane integrity, and subsequently the cell death. On the other hand, the reactive oxygen species (ROS) generated by WS2 nanosheets are found to be modest regardless of the WS2 concentration, which is contradictory to the case of its structural analogue, MoS2, where ROS also play a significant role in its antibacterial activity. Taken together, our findings provide a detailed understanding of the antibacterial mechanism of WS2 nanosheets, which might help promote their potential applications in biomedical fields.
Membrane destruction and phospholipid extraction by using two-dimensional MoS2 nanosheets.

Rongrong Wu,Xinwen Ou,Ranran Tian,Jie Zhang,Hangshuai Jin,Mingdong Dong,Jingyuan Li,Lei Liu

DOI: https://doi.org/10.1039/c8nr04207a

IF: 6.7

2018-01-01

Nanoscale

Abstract:The interaction of two-dimensional (2D) nanomaterials and bacterial membranes has attracted tremendous attention in antibacterial applications. Various peculiarities of 2D nanomaterials may lead to multiple mechanisms of their interactions with membranes. Here, we investigated the interaction between molybdenum disulfide (MoS2) nanosheets and the bacterial membrane by using both theoretical and experimental approaches. Molecular dynamics simulation presented that MoS2 nanosheets can disrupt the structure of the lipid membrane by making dents on its surface and extracting phospholipid molecules to reduce the integrity of the membrane. This is attributed to the combination of the dispersion interaction of lipid tails with S atoms and the electrostatic interactions of lipid head groups with the Mo and S atoms in the lateral edges of the MoS2 nanosheet. Scanning electron microscopy and transmission electron microscopy confirmed the dents and the destruction of the cell membrane, which would lead to the loss of cytoplasm and the death of bacteria. It should be noted that the phenomenon where MoS2 induces a dent is different from the direct insertion of graphene-based nanomaterials, which might be due to the thicker and stiffer structure of MoS2. Therefore, we believe that the molecular interactions of 2D nanomaterials with bacterial membranes should be highly correlated with their structural characteristics. This newly discovered mechanism of MoS2 nanomaterials to disrupt the cell membrane may promote the application of transition metal dichalcogenide (TMD) nanomaterials in designing remarkable antibacterial materials in the near future.
Antibacterial Mechanisms: Toward a Molecular Understanding of the Antibacterial Mechanism of Copper-Bearing Titanium Alloys Againststaphylococcus Aureus(adv. Healthcare Mater. 5/2016)

Mei Li,Zheng Ma,Ye Zhu,Hong Xia,M. Yao,Xiao Chu,Xiaolan Wang,Kè Yang,Mingying Yang,Yu Zhang,Chuanbin Mao

DOI: https://doi.org/10.1002/adhm.201670021

IF: 10

2016-01-01

Advanced Healthcare Materials

Abstract:On page 557, M. Yang, Y. Zhang, and C. Mao show how Cu ions released from the Cu-bearing biomedical titanium alloys break the membranes of the bacteria, induce the production of excessive reactive oxygen species (ROS) and interfere with gene expression. Together, these effects cause the killing of Gram-positive bacteria Staphylococcus aureus and lead to the excellent antibacterial properties of the Cu-bearing biomedical titanium alloys.
Robust Antibacterial Activity of Tungsten Oxide (WO3-X) Nanodots

Guangxin Duan,Lu Chen,Zhifeng Jing,Phil De Luna,Ling Wen,Leili Zhang,Lin Zhao,Jiaying Xu,Zhen Li,Zaixing Yang,Ruhong Zhou

DOI: https://doi.org/10.1101/494260

2019-01-01

Chemical Research in Toxicology

Abstract:Antibacterial agents are an important tool in the prevention of bacterial infections. Inorganic materials are attractive due to their high stability under a variety of conditions compared to organic antibacterial agents. Herein tungsten oxide nanodots (WO3-X), synthesized by a simple one-pot synthetic approach, was found to exhibit efficient antibacterial capabilities. The analyses with colony-forming units (CFU) showed excellent antibacterial activity of WO3-X against both gram-negative E. coli (Escherichia coli) and gram-positive S. aureus (Staphylococcus aureus) strains. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images revealed clear damage to the bacterial cell membranes, which was further confirmed by molecular dynamics simulations. Additionally, exposure to simulated sunlight was found to further increase germicidal activity of WO3-X nanodots – a 30-minute exposure to sunlight (combining 50 μg/mL WO3-X nanodots) showed a 70% decrease in E. coli viability compared to without exposure. Electron spin resonance spectroscopy (ESR) was used to elucidate the underlying mechanism of this photocatalytic activity through the generation of hydroxyl radical species. Cell counting kit-8 (CCK-8) and the live/dead assay were further employed to evaluate the cytotoxicity of WO3-X nanodots on eukaryotic cells, which demonstrated their general biocompatibility. In all, our results suggest WO3-X nanodots have considerable potential in antibacterial applications, while also being biocompatible at large.
Antimicrobial Polysulfone Blended Ultrafiltration Membranes Prepared with Ag/Cu2o Hybrid Nanowires

Zehai Xu,Shuaiju Ye,Guoliang Zhang,Wanbin Li,Congjie Gao,Chong Shen,Qin Meng

DOI: https://doi.org/10.1016/j.memsci.2016.02.035

IF: 9.5

2016-01-01

Journal of Membrane Science

Abstract:In this study, Ag–Cu2O nanowires (NWs) blended polysulfone (PSF) membranes with outstanding antimicrobial performance were successfully prepared via phase inversion. L-dopa was grafted onto the surface of Cu2O nanowires by in situ polymerization to create a zwitterionic surface, which gave suitable positions to fix the silver nanoparticles. SEM, XRD, FTIR and HRTEM results showed that Ag nanoparticles (NPs) were evenly and firmly loaded on the surface of Cu2O nanowires. The antibacterial tests revealed that the blended membranes possessed an enhanced antibacterial effect against both Escherichia coli and Staphylococcus aureus. The blended membranes held a remarkable antibacterial duration with very little release of Ag+. Compared to pure PSF membrane, the blended membranes exhibited superior permeation property, especially when the Ag–Cu2O NWs content was 0.5wt%. The method described in this paper provides a new and effective route to the rational design of antimicrobial membranes with good bactericidal activity and stability.
High antibacterial activity of chitosan - molybdenum disulfide nanocomposite.

Wenbo Cao,Lin Yue,Zhouping Wang

DOI: https://doi.org/10.1016/j.carbpol.2019.03.085

IF: 10.723

2019-01-01

Carbohydrate Polymers

Abstract:Bacterial infections have evolved as a life-threatening problem afflicting people due to the abuse of antibiotics and emergence of drug-resistant bacteria. Thus developing novel antibacterial materials is an urgent need. Herein, chitosan-MoS2 (CS-MoS2) nanocomposite was synthesized through thiol ligand functionalization and chemical modification to achieve more efficient bactericidal activity. CS-MoS2 exhibited synergistic remarkable bactericidal capability against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E.coli), where bacterial viabilities were significantly reduced. After treatment with 10 μg/mL of CS-MoS2, 100% and 98.1% of S. aureus and E.coli cells were killed respectively. A mechanism study revealed that the positively charged CS-MoS2 could interact with cell membrane, then cause damage to the membrane and cellular constituents by generation of reactive oxygen species (ROS) and glutathione (GSH) oxidation, finally inhibit bacterial growth. The CS-MoS2 could be an attractive antibacterial agent with improved efficiency and provide more strategies for application of MoS2.
A New Type of Inorganic Antibacterial Material: Cu-bearing Montmorillonite and Discussion on Its Mechanism

Y Ye,YH Zhou,MS Xia,CH Hu,HF Ling

DOI: https://doi.org/10.3321/j.issn:1000-324x.2003.03.009

2003-01-01

Abstract:With the raw material coming from Chifeng, the Inner Mongolia Autonomous Region, Cu bearing montmorillonite (Cu-MMT) was synthesized through cation exchange reaction. XRD analysis shows that, (001) basal spacing of montmorillonite expends from 1.544 nm to 1.588 nm after cation exchange. This indicates that Cu2+ enters interlayer position of montmorillonite as hydrated cation or composite cation. Through antibacterial experiment, it is found that Cu-MMT has strong antibacterial ability on E. coli and S. faecalis. Minimal inhibitory concentration (MIC) and killing concentration are 10 and 50 ppm respectively. The antibacterial ability of Cu-MMT is much better than that of Cu-carrying zeolite. Taking the up-to-date characterization on Cu-MMT and Cu-zeolite into account, it is clear that Cu-zeolite retains electric neutrality after cat ion exchange. Its antibacterial capacity relies on the amount of Cu2+ released into medium. On the other hand, Cu-MMT has residual positive charge after cation exchange. Its antibacterial ability results from two aspects, one is electrostatic attraction which makes large amount of bacterium being adhered on montmorillonite surface, the other is the same as Cu-zeollite, i.e., Cu2+ Slowly released into medium which can kill bacterium. The former aspect is the main reason that Cu-MMT has better antibacterial ability than Cu-zeolite.
Intestinal toxicity of tungsten disulfide nanosheet determined by Caco-2 cell monolayer model

顾纬卿,吴小梅,刘苏,吴兵

DOI: https://doi.org/10.13671/j.hjkxxb.2020.0438

2021-01-01

Abstract:Tungsten disulfide (WS2) as a two⁃dimensional nanomaterial has a broad application prospect in the fields of electronics, energy and medicine due to its unique crystal structure and mechanical flexibility. In this paper, human colon cancer Caco⁃2 cells were used to construct an in vitro intestinal absorption model, and the toxic effects of WS2 on intestinal cell layer structure and function were studied. Results showed that 1~80 μg·mL-1 WS2 did not induce the change of mitochondrial membrane potential in the Caco⁃2 cells, and ≥ 50 μg·mL-1 WS2 increased the content of intracellular reactive oxygen species, showing low cytotoxicity. For the monolayer of Caco⁃2 cells, 2 and 20 μg·mL-1 WS2 did not change their permeability, integrity, and expression of genes related to oxidative stress. However, WS2 inhibited the activity of plasma membrane ABC transporter in the Caco⁃2 cell monolayer. When the WS2 were co-exposed to the Caco⁃2 cell monolayer with cadmium, arsenic, benzo( a) pyrene, the cell membrane integrity and monolayer transport function in the monolayer did not change, however, the influence of cadmium on the expressions of oxidative stressrelated genes GPx and OXSR1 in the cell monolayer increased. Results of this study provide basic data for the evaluation of gastrointestinal toxicity and health risk of WS2 .
Properties, preparation, and application of tungsten disulfide: a review

Jinzi Ding,Ailing Feng,Xiaodong Li,Shijiu Ding,Liang Liu,Wei Ren

DOI: https://doi.org/10.1088/1361-6463/abd9e8

2021-02-12

Abstract:Abstract Transition metal dichalcogenides (TMDs) attract research interest owing to their unique physical and chemical properties. Among the family of TMDs, tungsten disulfide (WS 2 ) has a unique band structure due to its semiconductor characteristics; namely, its broadband spectral response characteristics, ultra-fast bleach recovery time and excellent saturable light absorption. This article is a review of the current application of WS 2 in catalysts, lasers, batteries, photodetectors and lubricants. The review begins with a brief overview of the structure, properties and growth of WS 2 and describes the existing preparation methods for this material. Finally, methods for improving the performance of WS 2 in its current applications are presented. This review is limited to the most recent reports on this topic.
Cell Wall Binding Strategies Based on Cu3SbS3 Nanoparticles for Selective Bacterial Elimination and Promotion of Infected Wound Healing

Hao Liu,Zhixuan Yu,Ling Liu,Shaojun Dong

DOI: https://doi.org/10.1021/acsami.4c04726

2024-07-03

Abstract:Utilizing nanomaterials as an alternative to antibiotics, with a focus on maintaining high biosafety, has emerged as a promising strategy to combat antibiotic resistance. Nevertheless, the challenge lies in the indiscriminate attack of nanomaterials on both bacterial and mammalian cells, which limits their practicality. Herein, Cu3SbS3 nanoparticles (NPs) capable of generating reactive oxygen species (ROS) are discovered to selectively adsorb and eliminate bacteria without causing obvious harm to mammalian cells, thanks to the interaction between O of N-acetylmuramic acid in bacterial cell walls and Cu of the NPs. Coupled with the short diffusion distance of ROS in the surrounding medium, a selective antibacterial effect is achieved. Additionally, the antibacterial mechanism is then identified: Cu3SbS3 NPs catalyze the generation of O2•-, which has subsequently been conversed by superoxide dismutase to H2O2. The latter is secondary catalyzed by the NPs to form •OH and 1O2, initiating an in situ attack on bacteria. This process depletes bacterial glutathione in conjunction with the disruption of the antioxidant defense system of bacteria. Notably, Cu3SbS3 NPs are demonstrated to efficiently impede biofilm formation; thus, a healing of MRSA-infected wounds was promoted. The bacterial cell wall-binding nanoantibacterial agents can be widely expanded through diversified design.
Achieving High Bactericidal and Antibiofouling Activities of 2D Titanium Carbide (ti3c2tx) by Delamination and Intercalation

Krishnamoorthy Rajavel,Shuyi Shen,Tao Ke,Daohui Lin

DOI: https://doi.org/10.1088/2053-1583/ab23ce

IF: 6.861

2019-01-01

2D Materials

Abstract:The development of extrinsic antibacterial agents using newly identified nanoscale 2D layered transition metal carbide (MXene) was established by different delamination and intercalation approaches to explore structure-bioproperty relations. Herein, we report the potential impact of the microbial inactivation of Escherichia coli (E. coli) by delaminating (water, dimethyl sulfoxide (DMSO), and isopropylamine) and intercalating (hydrazine monohydrate (HMH), sodium hydroxide, and potassium hydroxide) of MXene (Ti3C2Tx), and its bactericidal mechanism was interpreted. The delaminations and intercalations all significantly increased the colloidal stability and bactericidal effect of Ti3C2Tx suspensions via unpacking of stacked MXene layers, among which the HMH intercalation showed the best performance. Our experimental results reveal that the mechanism of bacterial killing was primarily because of surface wrapping followed by extracellular reactive oxygen species independent oxidative stress. This study also shows that the stacked layer separation along with the surface moiety is an essential and decisive factor that determines the lethal bacterial potency of Ti3C2Tx. The application of Ti3C2Tx-coated polyvinylidene fluoride (PVDF) membranes effectively inactivates E. coli; importantly, it prevents biofilm formation on the active membrane surfaces and thus has high potential for antibiofouling. This study provides useful guidelines for the future development of Ti3C2Tx-based antimicrobial surface coatings and increases their bioapplication potential.
Structures, morphological control, and antibacterial performance of tungsten oxide thin films

Guang-Lei Tan,Dan Tang,Davoud Dastan,Azadeh Jafari,Zhicheng Shi,Qian-Qian Chu,José P.B. Silva,Xi-Tao Yin

DOI: https://doi.org/10.1016/j.ceramint.2021.03.025

IF: 5.532

2021-06-01

Ceramics International

Abstract:The present work describes structural, morphological, and antibacterial properties of thin film coatings based on tungsten oxide material on stainless-steel substrates. Thin films were prepared by RF magnetron sputtering of W targets in the oxygen/argon plasma environment in 60 W sputtering power. The characterization of the specimens was made on the basis of microstructure and antibacterial properties of the thin films surface. The effect of O2/Ar ratio on the structure, morphology, and antibacterial properties of the tungsten oxide thin films was studied. Methods such as X-ray diffraction (XRD), scanning electron microscope (SEM), and Fourier Transform Infrared Spectroscopy (FTIR) were used to assess the properties of deposited thin films. XRD peak analysis indicates (100) and (200) of WO3 phase with hexagonal structure. Moreover, the micro-strain, grain size, and dislocation density were obtained. It is noteworthy that by increasing the oxygen percentage from 10% to 20%, the grain size decreases from 81 to 23 nm while the film micro-strain and dislocation density increases. The SEM results illustrates that tungsten oxide thin films are made of interconnected nano-points in a chain shape with sphere-shaped grains with diameter variation from 10 to 100 nm. The FTIR spectra displays four distinct bands corresponds to O–W–O bending modes of vibrations and W–O–W stretching modes of the WO3 films. The antibacterial effects of tungsten oxide thin films on steel stainless substrate against Escherichia coli bacteria are also examined for the first time and our observation shows that the number of bacteria on all tungsten oxide samples decreases after 24 h. The samples exhibit an excellent antibacterial performance. This paper renders a strategy through which the tungsten oxide thin films for antibacterial purpose and proposes that WO3 thin films are ideal for various medical applications including stainless steel medical tools, optical coatings, and antibacterial coatings.

materials science, ceramics
Biofilm microenvironment-activated multimodal therapy nanoplatform for effective anti-bacterial treatment and wound healing

Lei Li,Yulin Xie,Junrong Wang,Qianqian Sun,Minghong Gao,Chunxia Li

DOI: https://doi.org/10.1016/j.actbio.2024.06.002

IF: 10.633

2024-06-08

Acta Biomaterialia

Abstract:Antimicrobial drug development faces challenges from bacterial resistance, biofilms, and excessive inflammation. Here, we design an intelligent nanoplatform utilizing mesoporous silica nanoparticles doped with copper ions for loading copper sulfide (DM/Cu 2+ -CuS). The mesoporous silica doped with tetrasulfide bonds responds to the biofilm microenvironment (BME), releasing Cu 2+ ions, CuS along with hydrogen sulfide (H 2 S) gas. The release of hydrogen sulfide within 72 h reached 793.5 μM, significantly higher than that observed with conventional small molecule donors. H 2 S induces macrophages polarization towards the M2 phenotype, reducing inflammation and synergistically accelerating endothelial cell proliferation and migration with Cu 2+ ions. In addition, H 2 S disrupts extracellular DNA within biofilms, synergistically photothermal enhanced peroxidase-like activity of CuS to effectively eradicate biofilms. Remarkably, DM-mediated consumption of endogenous glutathione enhances the anti-biofilm activity of H 2 S and improves oxygen species (ROS) destruction efficiency. The combination of photothermal therapy (PTT), chemodynamic therapy (CDT), and gas treatment achieves sterilization rates of 99.3% and 99.6% against Staphylococcus aureus ( S. aureus ) and Escherichia coli ( E. coli ), respectively, in vitro under 808 nm laser irradiation. Additionally, in vivo experiments demonstrate a significant biosafety and antibacterial potential. In summary, the H 2 S donor developed in this study exhibits enhanced biocompatibility and controlled release properties. By integrating BME-responsive gas therapy with antibacterial ions, PTT and CDT, a synergistic multimodal strategy is proposed to offer new therapeutic approaches for wound healing. Statement of Significance The advanced DMOS/Cu 2+ -CuS (DMCC) multimodal therapeutic nanoplatform has been developed for the treatment of drug-resistant bacterial wound infections and has exhibited enhanced therapeutic efficacy through the synergistic effects of photothermal therapy, chemodynamic therapy, Cu 2+ ions, and H 2 S. The DMCC exhibited exceptional biocompatibility and could release CuS, Cu 2+ , and H 2 S in response to elevated concentrations of glutathione within the biofilm microenvironment. H 2 S effectively disrupted the biofilm structure. Meanwhile, peroxidase activity of CuS combined with GSH-mediated reduction of Cu 2+ to Cu + generated abundant hydroxyl radicals under acidic conditions, leading to efficient eradication of pathogenic bacteria. Furthermore, both H 2 S and Cu 2+ could modulate M2 macrophages polarization and regulate immune microenvironment dynamics. These strategies collectively provide a novel approach for developing antibacterial nanomedical platforms.

engineering, biomedical,materials science, biomaterials
Integrated endotoxin-adsorption and antibacterial properties of platelet-membrane-coated copper silicate hollow microspheres for wound healing

Zaihui Peng,Xiaochun Zhang,Long Yuan,Ting Li,Yajie Chen,Hao Tian,Dandan Ma,Jun Deng,Xiaowei Qi,Xuntao Yin

DOI: https://doi.org/10.1186/s12951-021-01130-w

IF: 10.2

2021-11-22

Journal of Nanobiotechnology

Abstract:Abstract Serious infection caused by drug-resistant gram-negative bacteria and their secreted toxins ( e.g. , lipopolysaccharide) is a serious threat to human health. Thus, treatment strategies that efficiently kill bacteria and reducing the impact of their toxins simultaneously are urgently required. Herein, a novel antibacterial platform composed of a mesoporous copper silicate microsphere (CSO) core and a platelet membrane (PM) shell was prepared (CSO@PM). CSO@PM specifically targets bacteria owing to formyl peptide receptors on the PM and, combined with photothermal therapy (PTT), exhibits highly effective bacter icidal activity. Importantly, CSO@PM can adsorb lipopolysaccharide secreted by gram-negative bacteria, resulting in inflammation reduction. Thus, CSO@PM stimulates re-epithelialization and granulation-tissue formation, promoting wound healing. Moreover, this antibacterial platform exhibits no obvious toxicity at all the test concentrations in vitro and in vivo. Thus, CSO@PM exhibits a robust antibacterial effect and a strong toxin-adsorption capacity, facilitating the clinical treatment of many bacterial infections and the development of next-generation antibacterial nanoagents. Graphical Abstract

biotechnology & applied microbiology,nanoscience & nanotechnology
CQDs-MoS2 QDs loaded on Dendritic fibrous Nanosilica/Hydrophobic waterborne polyurethane acrylate for antibacterial coatings

Jianzhong Ma,Chenyan Liu,Kai Yan

DOI: https://doi.org/10.1016/j.cej.2021.132170

IF: 15.1

2022-02-01

Chemical Engineering Journal

Abstract:Since bacterial infections are the cause of many diseases, death, and disability, considerable attention has been paid to the preparation of antibacterial surfaces. Anti-adhesive and bactericidal synergistic surfaces show promising antimicrobial applications due to the removal and killing effect of microorganisms. Herein, we proposed a leather coating surface with hydrophobic and photocatalytic antibacterial properties. Dendritic fibrous nanosilica (DFNS) loaded with carbon quantum dots (CQDs) and MoS2 QDs (2) nanoparticles were successfully prepared, which exhibited excellent photocatalytic antibacterial activity. Specifically, the 2 nanoparticles exhibited antibacterial activities of 99.98%, 95.35%, and 99.99% against Escherichia coli, Staphylococcus aureus, and Aspergillus niger, respectively. Then, hydrophobic waterborne polyurethane acrylate (HWPUA) was developed, which exhibited enhanced bacterial adhesion resistance. Furthermore, the HWPUA/2 coating completely inactivated the residual bacterial cells. Therefore, the synergistic antibacterial coatings developed in this work could have potential applications as antibacterial surfaces.

engineering, chemical, environmental
MoS 2 Nanosheet-Based Membranes for Antibacterial Applications

Yingcan Zhao,Yang Liu,Xinyue Fu,Xinbo Zhang,Xuanlin Huang

DOI: https://doi.org/10.1021/acsanm.2c04637

IF: 6.14

2022-12-14

ACS Applied Nano Materials

Abstract:With the rapid development of two-dimensional nanomaterials, the applications of nanomaterials will inevitably release to the natural environment. In this study, we investigated the interactions between environmental microorganisms and nanomaterial applications, where we chose MoS2 (metallic 1T and semiconducting 2H) and MoS2 membranes as the representative two-dimensional nanomaterial applications, and Escherichia coli was selected as model bacteria to represent the environmental microorganism. In suspension, it was found that the antibacterial efficiency of 1T-MoS2 was around 30% higher than that of 2H-MoS2 nanosheets at low MoS2 concentrations. This is because the distorted octahedral coordination structure endows 1T-MoS2 with higher conductivity than 2H-MoS2, therefore benefitting the electron transfer ability to produce reactive oxygen species (ROS), such as O2 ·– and H2O2, which are both absent for 2H-MoS2. However, the common antibacterial pathways shared by both 1T-MoS2 and 2H-MoS2 are glutathione (GSH) oxidation that causes oxidative stress in bacterial cells and cell membrane disruption in direct contact with the sharp edges of MoS2 nanosheets. Interestingly, 1T-MoS2 and 2H-MoS2 have similar antibacterial efficiencies of around 75% when applied on the poly(ether sulfone) (PES) membrane surfaces for anti-biofouling purposes due to the similar physical damages induced by the sharp edges of two-dimensional structures with 1T-MoS2 and 2H-MoS2. The results imply that bacterial physical damages induced by 1T- and 2H-MoS2 membranes play a more important role than chemical oxidative stress. This study provides information that scientists and engineers should pay attention to the applications using nanomaterials since different application forms could have different interactions with the potential environmental microorganism.

materials science, multidisciplinary,nanoscience & nanotechnology
Efficient Antibacterial Membrane based on Two-Dimensional Ti3C2Tx (MXene) Nanosheets

Kashif Rasool,Khaled A. Mahmoud,Daniel J. Johnson,Mohamed Helal,Golibjon R. Berdiyorov,Yury Gogotsi

DOI: https://doi.org/10.1038/s41598-017-01714-3

IF: 4.6

2017-05-09

Scientific Reports

Abstract:Advanced membranes that enable ultrafast water flux while demonstrating anti-biofouling characteristics can facilitate sustainable water/wastewater treatment processes. MXenes, two-dimensional (2D) metal carbides and nitrides, have attracted attention for applications in water/wastewater treatment. In this work, we reported the antibacterial properties of micrometer-thick titanium carbide (Ti3C2Tx) MXene membranes prepared by filtration on a polyvinylidene fluoride (PVDF) support. The bactericidal properties of Ti3C2Tx modified membranes were tested against Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis) by bacterial growth on the membrane surface and its exposure to bacterial suspensions. The antibacterial rate of fresh Ti3C2Tx MXene membranes reaches more than 73% against B. subtilis and 67% against E. coli as compared with that of control PVDF, while aged Ti3C2Tx membrane showed over 99% growth inhibition of both bacteria under same conditions. Flow cytometry showed about 70% population of dead and compromised cells after 24 h of exposure of both bacterial strains. The damage of the cell surfaces was also revealed by scanning electron microscopy (SEM) and atomic force microscopy (AFM) analysis, respectively. The demonstrated antibacterial activity of MXene coated membranes against common waterborne bacteria, promotes their potential application as anti-biofouling membrane in water and wastewater treatment processes.

multidisciplinary sciences
Ultrasmall FeS2 Nanoparticles-Decorated Carbon Spheres with Laser-Mediated Ferrous Ion Release for Antibacterial Therapy

Juqun Xi,Lanfang An,Yaling Huang,Jian Jiang,Yanqiu Wang,Gen Wei,Zhilong Xu,Lei Fan,Lizeng Gao

DOI: https://doi.org/10.1002/smll.202005473

IF: 13.3

Small

Abstract:Recent progress in nanotechnology and the ancient use of sulfur in treating dermatological disorders have promoted the development of nano-sulfides for antimicrobial applications. However, the variable valences and abundant forms of nano-sulfides have complicated investigations on their antibacterial activity. Here, carbon nanospheres (CNSs) with decoration of ultrasmall FeS2 nanoparticles (CNSs@FeS2 ) is synthesized, and their antibacterial ability and mechanism are explored. The CNSs@FeS2 released Fe2+ and sulfur ions simultaneously through dissolution and disproportionation. In vitro study indicated that the released Fe2+ killed bacteria by increasing the oxidative state of bacterial surfaces and intracellular molecules. Importantly, the released sulfur exhibited a protective effect on Fe2+ , ensuring the stable existence of Fe2+ to continuously combat bacteria. Moreover, the carbon shells of CNSs@FeS2 not only prevented the aggregation of FeS2 but also accelerated the release of Fe2+ through photothermal effects to achieve synergistic hyperthermia/Fe2+ therapy. In vivo experiments indicated that treatment with CNSs@FeS2 resulted in a marked reduction in bacterial number and improvement in survival in an acute peritonitis mouse model, and antibacterial wound experiments demonstrated high efficacy of CNSs@FeS2 -enabled synergistic hyperthermia/Fe2+ therapy. Thus, this study clarifies the antibacterial mechanism of FeS2 and offers a synergetic therapeutic platform with laser-mediated Fe2+ release for antibacterial applications.
Fabrication of a novel antibacterial TPU nanofiber membrane containing Cu-loaded zeolite and its antibacterial activity toward Escherichia coli

Jingjing Lei,Guangyuan Yao,Zhiming Sun,Bin Wang,Caihong Yu,Shuilin Zheng

DOI: https://doi.org/10.1007/s10853-019-03727-x

IF: 4.5

2019-06-03

Journal of Materials Science

Abstract:A novel antibacterial thermoplastic polyurethane (TPU) nanofiber membrane was fabricated by electrospinning with the aid of Cu-loaded NaX zeolite (CuX), which showed excellent and long-lasting antibacterial activity against Escherichia coli (E. coli). The crystalline structure, morphology and composition of the obtained NaX zeolite, CuX and CuX/TPU nanofiber membrane were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) and X-ray fluorescence (XRF), respectively. The antibacterial activity of CuX/TPU nanofiber membrane against E. coli was investigated by inhibition zone method and plate-counting method, and it is indicated that the inactivation efficiency was increased from 58.40 to 99.85% with increasing the addition of CuX from 5 to 30% in 4 h. The result of kinetics study indicated that the disinfection process accorded with the pseudo-first-order model. The possible antibacterial mechanism was also proposed that the released Cu2+ by CuX in nanofiber membrane destroyed the cell wall and penetrated plasma membrane of E. coli. It is expected that this CuX/TPU nanofiber membrane with excellent antibacterial activity would be a promising candidate for biomedical applications.

materials science, multidisciplinary
Neurological abnormalities in patients with schizophrenia or schizophreniform disorder at first admission to hospital: correlations with computerized tomography and regional cerebral blood flow findings

P. Rubin,S. Vorstrup,R. Hemmingsen,H. S. Andersen,B. B. Bendsen,N. Strømsø,J. K. Larsen,T. Bolwig

DOI: https://doi.org/10.1111/j.1600-0447.1994.tb01611.x

1994-11-01

Acta Psychiatrica Scandinavica

Abstract:Forty‐five patients with schizophrenia or schizophreniform disorder admitted to hospital for the first time had a neurological examination, including integrative sensory and complex motor acts, by a trained neurologist. The patients were studied by CT (computerized tomography) and rCBF (regional cerebral blood flow) as well. A control group of 24 healthy volunteers was included. The patients had significantly more neurological abnormalities (NA) than the healthy volunteers. Medication did not explain the discrepancy. The NA were associated with sulcal enlargement and smaller brains as visualized by CT but not with ventricular enlargement. There was no association between the regional flow values and NA.

Membrane destruction-mediated antibacterial activity of tungsten disulfide (WS<sub>2</sub>)

uction-mediated antibacterial activity of tungsten disul fi de ( WS 2 )

Membrane destruction and phospholipid extraction by using two-dimensional MoS2 nanosheets.

Antibacterial Mechanisms: Toward a Molecular Understanding of the Antibacterial Mechanism of Copper-Bearing Titanium Alloys Againststaphylococcus Aureus(adv. Healthcare Mater. 5/2016)

Robust Antibacterial Activity of Tungsten Oxide (WO3-X) Nanodots

Antimicrobial Polysulfone Blended Ultrafiltration Membranes Prepared with Ag/Cu2o Hybrid Nanowires

High antibacterial activity of chitosan - molybdenum disulfide nanocomposite.

A New Type of Inorganic Antibacterial Material: Cu-bearing Montmorillonite and Discussion on Its Mechanism

Intestinal toxicity of tungsten disulfide nanosheet determined by Caco-2 cell monolayer model

Properties, preparation, and application of tungsten disulfide: a review

Cell Wall Binding Strategies Based on Cu3SbS3 Nanoparticles for Selective Bacterial Elimination and Promotion of Infected Wound Healing

Achieving High Bactericidal and Antibiofouling Activities of 2D Titanium Carbide (ti3c2tx) by Delamination and Intercalation

Structures, morphological control, and antibacterial performance of tungsten oxide thin films

Biofilm microenvironment-activated multimodal therapy nanoplatform for effective anti-bacterial treatment and wound healing

Integrated endotoxin-adsorption and antibacterial properties of platelet-membrane-coated copper silicate hollow microspheres for wound healing

CQDs-MoS2 QDs loaded on Dendritic fibrous Nanosilica/Hydrophobic waterborne polyurethane acrylate for antibacterial coatings

MoS 2 Nanosheet-Based Membranes for Antibacterial Applications

Efficient Antibacterial Membrane based on Two-Dimensional Ti3C2Tx (MXene) Nanosheets

Ultrasmall FeS2 Nanoparticles-Decorated Carbon Spheres with Laser-Mediated Ferrous Ion Release for Antibacterial Therapy

Fabrication of a novel antibacterial TPU nanofiber membrane containing Cu-loaded zeolite and its antibacterial activity toward Escherichia coli

Neurological abnormalities in patients with schizophrenia or schizophreniform disorder at first admission to hospital: correlations with computerized tomography and regional cerebral blood flow findings