Electro‐Conductive Ti3C2 MXene Multilayered Membranes: Dye Removal and Antifouling Performance
Zahra Zandi,Masoud Rastgar,Mojtaba Mohseni,Mostafa Dadashi Firouzjaei,Waralee Dilokekunakul,Babak Anasori,Chad D. Vecitis,Robert Keller,Matthias Wessling,Mark Elliott,Ahmad Rahimpour,Mohtada Sadrzadeh
DOI: https://doi.org/10.1002/adfm.202401970
IF: 19
2024-03-23
Advanced Functional Materials
Abstract:This work details a novel electroconductive membrane fabrication using Ti3C2Tx (MXene) nanosheet coating. Ti3C2‐MXene is applied over a microfilter. The dye rejection rates improved significantly with MXene coating, reaching over 99.71% for reactive red (RR), 97.95% for reactive black (RB), and 68.91% for methyl orange (MO). Applying a 4 V cathodic potential yielded >99% flux recovery during humic acid filtration. This work describes the fabrication of a novel electroconductive membrane made of Ti3C2Tx (MXene) nanosheet coating through a one‐step pressure‐assisted technique. Ti3C2‐MXene is firmly attached over a polyamide–imide (PAI) microfilter by employing a binder composed of carboxymethyl cellulose (CMC)/glutaraldehyde (GA). Through coating a proper amount of multilayer Ti3C2‐MXene, the electrical conductivity of 174 ± 0.16 S m−1 is achieved. The rejection rates of reactive red 120 (RR120), reactive black (RB), and methyl orange (MO) by the pristine PAI membrane are 45.2%, 40.81%, and 33.65%, respectively. However, rejection rates significantly improve with the Ti3C2 MXene coating to over 99.71%, 97.95%, and 68.91% for RR120, RB, and MO. Applying a 4 V cathodic potential resulted in a flux recovery ratio (FRR) of 99.83% and a flux decline rate (FDR) of less than 1% during humic acid (HA) filtration. Without applying voltage, the MXene‐coated membrane shows an FRR and FDR of 92.51% and 45.56%, respectively. Surface energy analysis reveals strong repulsive interactions between foulants and the membrane surface. Moreover, the surface free energy indicates that foulants such as sodium alginate (SA) and bovine serum albumin (BSA) exhibit stronger adhesion to the membrane than HA, consistent with the fouling experiment results.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology