Abstract:Two-dimensional (2D) material-based membranes hold great promise in wastewater treatment. However, it remains challenging to achieve highly efficient and precise small molecule/ion separation with pure 2D material-fabricated lamellar membranes. In this work, laminated graphene oxide (GO)–cellulose nanocrystal (CNC) hybrid membranes (GO/CNC) were fabricated by taking advantages of the unique structures and synergistic effects generated from these two materials. The characterization results in physiochemical properties, and the structure of the as-synthesized hybrid membranes displayed enhanced membrane surface hydrophilicity, enhanced crumpling surface structure, and slightly enlarged interlayer-spacing with the incorporation of CNCs. Water permeability increases by two to four times with the addition of different CNC weight ratios in comparison to a pristine GO membrane. The optimal GO/CNC membrane achieved efficient rejection toward three typical antibiotics at 74.8, 90.9, and 97.2% for sulfamethoxazole (SMX), levofloxacin (Levo), and norfloxacin (Nor), respectively, while allowing a high passage of desirable nutrients such as NO3– and H2PO4–. It was found that SMX removal is primarily governed by electrostatic repulsion, while adsorption plays a crucial role in removing Levo and Nor. Moreover, the density functional theory calculations confirmed the increased antibiotic removal in the presence of an organic foulant, humic acid. Such a 2D material-based hybrid membrane offers a new strategy to develop fit-for purpose membranes for resource recovery and water separation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20652?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20652</a>.Evaluation of membrane antifouling potential (Text S1); the schematic for membrane fabrication (Figure S1); the simplified structure of HA molecules used for DFT calculations (Figure S2); SEM images of GO nanosheets and CNC nanorods (Figure S3); XPS and FT-IR spectra of GO nanosheets and CNC nanorods (Figure S4); XRD pattern of dry and hydrated GC85 membranes (Figure S5); contact angle of the membranes (Figure S6); membrane surface zeta potential (Figure S7); antibiotic concentration changes with time during filtration (Figure S8); static adsorption of the GC100 and GC85 membranes in the cases of SMX, Levo, and Nor (Figure S9); surface roughness images of the membranes (Figure S10); the C1s peaks in the XPS spectra of GC100 and GC85 membranes before and after antibiotic adsorption (Figure S11); FT-IR spectra of GC100 and GC85 membranes before and after antibiotic adsorption (Figure S12); optimized complexes of the mixtures from DFT calculations (Figure S13), nutrient ions and antibiotic removal of different membranes (Table S1), and antibiotic removal with and without the presence of salts (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20652/suppl_file/am0c20652_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Nanocellulose-intercalated MXene NF membrane with enhanced swelling resistance for highly efficient antibiotics separation

A Novel Thin-Film Nano-Templated Composite Membrane with in Situ Silver Nanoparticles Loading: Separation Performance Enhancement and Implications

High performance mixed-dimensional assembled MXene composite membranes for molecular sieving

Antibiotics Separation with MXene Membranes Based on Regularly Stacked High‐Aspect‐Ratio Nanosheets

Polycation-Intercalated MXene Membrane with Enhanced Permselective and Anti-Microbial Properties

Enhancing Interfacial Adhesion of MXene Nanofiltration Membranes Via Pillaring Carbon Nanotubes for Pressure and Solvent Stable Molecular Sieving

Self-assembly enabled nano-intercalation for stable high-performance MXene membranes

In-situ incorporating zwitterionic nanocellulose into polyamide nanofiltration membrane towards excellent perm-selectivity and antifouling performances

Bioinspired Macrocyclic Molecule Supported Two‐Dimensional Lamellar Membrane with Robust Interlayer Structure for High‐Efficiency Nanofiltration

Incorporation of Cellulose Nanocrystals into Graphene Oxide Membranes for Efficient Antibiotic Removal at High Nutrient Recovery

Hetero-dimensional 1D silk nanofibril and 2D MXene composite membrane with tailorable nanofluidic channels for enhanced water purification

Construction of Anti-Swelling Circuit Board-Like Activated Graphene Oxide Lamellar Nanofilms with Functionalized Heterostructured 2D Nanosheets

Highly permeable and stable hyperbranched polyethyleneimine crosslinked AgNP@Ti3C2Tx MXene membranes for nanofiltration

Membranes with ZIF-8 regulated MXene nanosheet stacks for efficient molecular sieving

Construction of MoS 2 @MXene composite membranes with stable laminar structure for superior nanofiltration performance

Ionic liquid-functionalized antibiofouling nanofiltration membranes

Metal-polyphenol cross-linked titanium carbide membranes with stable interlayer spacing for efficient wastewater treatment

MXene nanosheet stacks with tunable nanochannels for efficient molecular separation

Column‐to‐Beam Structure House Inspired MXene‐Based Integrated Membrane with Stable Interlayer Spacing for Water Purification

Two-dimensional carbon nanomesh membrane for ultrafast molecular sieving

In-situ incorporation of halloysite nanotubes with 2D zeolitic imidazolate framework-L based membrane for dye/salt separation