Abstract:The bidirectional output fiber laser can achieve two laser outputs from a single resonant cavity, which can reduce the volume and cost of high-power fiber laser systems and has good application prospects in the industry. In this work, we demonstrated a bidirectional output fiber laser oscillator structure, and a total output power of 8 kW at the 2 ports × 4 kW level was achieved experimentally for the first time. In order to suppress stimulated Raman scattering (SRS) and transverse mode instability (TMI), the double cladding ytterbium-doped fiber with a core/cladding diameter of 30/400 μm, a pair of matched output coupler fiber Bragg gratings (OCFBG) with a 3 dB bandwidth of 2 nm, and the pump source with wavelength-stabilized 981 nm laser diodes (LDs) were employed. The effect of the coiling method and diameter of the active fiber on the optical-to-optical (O-O) efficiency and TMI threshold were studied intensively. The comparison of laser performance with a unidirectional output oscillator was further exploited, and results indicated that the bidirectional output fiber laser oscillator possessed a higher O-O efficiency and TMI threshold. By optimizing the fiber coiling diameter and coiling method, we finally achieved a total laser output power of 8169 W (3769 W at end A and 4400 W at end B), with an efficiency of 74.6% and beam quality of M 2 A ∼ 2.13, M 2 B ∼ 2.36, while the total output power achieved by unidirectional output structure was only 5805 W with signs of TMI. To the best of our knowledge, it is the highest output power of the bidirectional output fiber laser.

Mitigating Transverse Mode Instability in All-Fiber Laser Oscillator and Scaling Power Up to 25 Kw Employing Bidirectional-Pump Scheme

Mitigating transverse mode instability in fiber laser oscillator by employing direct pump modulation

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

Influence of Pump Current Waveform on The Mitigation of Transverse Mode Instability in Fiber Laser Oscillator

Optimizing the pump wavelength to improve the transverse mode instability threshold of fiber laser by 3.45 times

Comparison and Optimization on Transverse Mode Instability of Fiber Laser Amplifier Pumped by Wavelength-Stabilized and Non-Wavelength-Stabilized 976 Nm Laser Diode

Dynamic modal characteristics of transverse mode instabilities in ytterbium-doped fiber laser oscillator

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Optimization and demonstration of 6 kW oscillating-amplifying integrated fiber laser employing spindle-shaped fiber to suppress SRS and TMI

Study on the power scaling and mode instability property in an all-fiber narrow-linewidth tapered fiber amplifier

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

High-speed modal analysis of dynamic modal coupling in fiber laser oscillator

3.1 kW monolithic MOPA configuration fibre laser bidirectionally pumped by non-wavelength-stabilized laser diodes

The effect of population inversion saturation on the transverse mode instability threshold in high power fiber laser oscillators

Effective mitigation of photodarkening-induced transverse mode instability in a monolithic fiber laser oscillator by 450?nm laser irradiation

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

Optimization and demonstration of a bidirectional output linear-cavity fiber laser with a record high power of 2 × 4 kW

Mitigating mode instabilities by controllable mode beating excitation with a photonic lantern

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

Kilowatt-Level High-Efficiency Narrow-Linewidth All-Fiber Tm3+-Doped Laser