Mesoporous nano-WOx/ZrO2: facile synthesis and improved catalysis

JunHua Zhu,Kangjian Tang,Yingchun Ye,Xiaohong Yuan,Weimin Yang,Yi Tang

DOI: https://doi.org/10.1039/c6ra14951k

IF: 4.036

2016-01-01

RSC Advances

Abstract:Schematic diagram for the preparation process of mesoporous nano-WOx/ZrO2.

What problem does this paper attempt to address?

Mesoporous Nano-Wox/Zro2: Facile Synthesis and Improved Catalysis

JunHua Zhu,Kangjian Tang,Yingchun Ye,Xiaohong Yuan,Weimin Yang,Yi Tang

DOI: https://doi.org/10.1039/c6ra14951k

IF: 4.036

2016-01-01

RSC Advances

Abstract:A facile synthetic method was developed to prepare mesoporous nano-WOx/ZrO2 (MN-WZ). TEM, XRD, BET, UV-vis, Raman and catalytic tests were performed to investigate itsmesoporous structure and acidity. Due to the abundant pores and corresponding permeability, the MN-WZ showed much improved catalytic performance on the conversion of n-pentane isomerisation.
Controllable Multicomponent Co‐Assembly Approach to Ordered Mesoporous Zirconia Supported with Well‐Dispersed Tungsten Oxide Clusters As High‐Performance Catalysts

Jichun Li,Xuanyu Yang,Junhao Ma,Chenyi Yuan,Yuan Ren,Xiaowei Cheng,Yonghui Deng

DOI: https://doi.org/10.1002/cctc.202100385

IF: 4.5

2021-01-01

ChemCatChem

Abstract:Zirconia supported WOx clusters with high acid strength and good stability are important solid acid catalysts in many reactions. However, conventional synthetic methods such as incipient-wetness impregnation and co-precipitation usually result in the products with low catalytic activity due to low surface area, uncontrollable and non-homogeneous distribution of tungsten species. In this study, a facile multicomponent co-assembly approach was utilized to straightforwardly synthesize ordered mesoporous WOx/ZrO2 composites (OMWZr) with mesopore size over 17 nm, pore volume of 0.13-0.18 cm(3)/g and surface area of 27.3-41.7 m(2)/g. The materials were composed of robust crystalline ZrO2 skeleton and well-dispersed WOx clusters (polytungstates) in framework under the optimized conditions. The tungsten species were well stablized by the crystallized skeletons of mesoporous ZrO2, which can inhibit the growth of tetragonal ZrO2 but facilitate crystallization of monoclinic ZrO2. The states of tungsten species (monotungstates, polytungstates and crystalline WO3) can be precisely adjusted by their doping amount in framework and calcination temperature as well, which can further tune the surface acidity of OMWZr composites. Owing to the existence of numerous active surface WOx clusters generated over exposed surface of mesoporous ZrO2, the OMWZr catalysts not only show great spatial homogeneity of accessible Bronsted acid sites and feasible mass diffusion during catalytic reactions, but also display outstanding acid-catalytic performance over hydrolysis reactions of benzaldehyde dimethyl acetal. The catalyst can be reused for more than 10 cycles, without reduction of catalytic activity and selectivity to benzaldehyde.
C-Axis-penetrated Mesoporous MWW Zeolite Nanosheets: Preparation by H2O2-induced Micro-Explosion and Their Enhanced Properties

Chunna Zhang,Feng Lin,Lingtao Kong,Zhaoqi Ye,Di Pan,Hongbin Li,He Li,Peng Liu,Yahong Zhang,Hongbin Zhang,Yi Tang

DOI: https://doi.org/10.1039/d2qi00928e

IF: 7.779

2022-01-01

Inorganic Chemistry Frontiers

Abstract:A series of highly dispersed and c-axis-penetrated mesoporous MWW oligolayers with enhanced properties was prepared via an efficient, green, and controllable method through H2O2-induced micro-explosion.
Preparation and Characterization of WOx/ZrO2 Nanosized Catalysts with High WOx Dispersion Threshold and Acidity

Kunshan Song,Hongbin Zhang,Yahong Zhang,Yi Tang,Kangjian Tang

DOI: https://doi.org/10.1016/j.jcat.2012.11.011

IF: 7.3

2013-01-01

Journal of Catalysis

Abstract:WOx/ZrO2 nanosized catalysts with high dispersion threshold were prepared via a novel two-phase interface hydrolysis (TPIH) method and characterized by N2 physisorption, X-ray diffraction, transmission electron microscopy, UV–vis diffuse reflectance spectroscopy, Raman spectroscopy, and potentiometric titration with n-butylamine. It was found that the WOx/ZrO2 nanosized catalyst prepared by TPIH possessed a higher dispersion threshold (ca. 0.372g WOx/g ZrO2) than that obtained by a conventional impregnation method, due to its higher specific surface area of 114m2/g and tungsten surface density (6.2W atoms/nm2). Significantly, the catalyst at dispersion threshold by TPIH has a remarkable number of strong acid sites with E>400mV and nearly double catalytic activity for n-pentane isomerization compared to that prepared by a conventional impregnation method. When this is combined with the results of spectral characterization, the high activity of the catalysts obtained by TPIH is ascribed to the abundant strong acidic polytungstate species on ZrO2 at their dispersion threshold. Challenges for future work would be developing the TPIH method with supports and exploring reaction conditions to reduce coke formation.
MOF derived mesoporous K-ZrO2 with enhanced basic catalytic performance for Knoevenagel condensations

Peng Wang,Jian Feng,Yupei Zhao,Sai Gu,Jian Liu

DOI: https://doi.org/10.1039/c7ra12378g

IF: 4.036

2017-01-01

RSC Advances

Abstract:Mesoporous K-ZrO2 are designed and synthesized through a direct heat-treatment process of a KNO3 loaded UiO-66 metal organic framework. Very interestingly, the carbon intermediates formed during the heat-treatment process can act both as mesoporous templates and base-resistant reinforcement for zirconia. The resultant mesoporous K-ZrO2 catalysts with high surface area show excellent catalytic performance in Knoevenagel condensations, especially for substrates with large molecular size. The mesoporous KZ also show enhanced activity when compared to KZ synthesized from traditional zirconium hydroxides. To the best of our knowledge, this is the first synthesis of a metal-oxide type solid base with a MOF precursor.
Preparation of mesoporous nanocrystalline tetragonal zirconia for catalytic methane combustion

aimin liu,hao che,h cui,qiang fu,rongrong jiang,lijuan wang

DOI: https://doi.org/10.1179/1433075X13Y.0000000184

2014-01-01

Materials Research Innovations

Abstract:Mesoporous nanocrystalline tetragonal zirconia (ZrO2) materials were synthesised via combining the soft templating method with the solid-liquid method. In brief, mesostructured zirconium hybrids were first prepared via the soft templating method and then ground with solid copper nitrate salts followed by low temperature heat treatment and further high temperature calcination in air. Finally, mesoporous nanocrystalline tetragonal ZrO2 materials were obtained after etching in acid solution. The characterisation results indicate that the obtained mesoporous ZrO2 materials have higher specific surface areas in the range of 100-300 m 2 g 21 and pore diameters centred at 4.0-5.0 nm. The pore walls are composed of tetragonal ZrO2 nanocrystalline particles with an average size of 1-15 nm. These mesoporous nanocrystalline tetragonal ZrO2 materials as catalysts demonstrate good catalytic activity toward methane combustion, characterised by lower conversion temperatures (650-700 degrees C) and active energies (75-90 kJ mol(-1)) than those of the reported ZrO2 materials, meaning their potential applications as catalysts or catalyst supporters in methane combustion.
c -Axis-penetrated mesoporous MWW zeolite nanosheets: preparation by H 2 O 2 -induced micro-explosion and their enhanced properties

Chunna Zhang,Feng Lin,Lingtao Kong,Zhaoqi Ye,Di Pan,Hongbin Li,He Li,Peng Liu,Yahong Zhang,Hongbin Zhang,Yi Tang

DOI: https://doi.org/10.1039/d2qi00928e

IF: 7.779

2022-01-01

Inorganic Chemistry Frontiers

Abstract:A series of highly dispersed and c -axis-penetrated mesoporous MWW oligolayers with enhanced properties was prepared via an efficient, green, and controllable method through H 2 O 2 -induced micro-explosion.

chemistry, inorganic & nuclear
Synthesis of mesoporous nanocrystalline Co3O4 via an easy and inexpensive method

Haitao Zhang,Xinyi Chen,Zhongjie Yang,Lifei Liu,Zhaosheng Li,Tao Yu,Zhigang Zou

DOI: https://doi.org/10.1088/0022-3727/40/14/006

2007-01-01

Abstract:In this paper, we report the synthesis of mesoporous nanocrystalline Co3O4 via a one-step, convenient and inexpensive method. The obtained Co3O4 powder samples were characterized by x-ray diffraction, N-2 adsorption-desorption experiments and transmission electron microscopy. It is revealed that the molar ratio of the reactant and the calcination temperature had a significant influence on the morphology and the pore-sized distribution of the Co3O4 samples. A possible formation mechanism of mesoporous Co3O4 nanocrystalline is proposed.
Ultrahigh-efficiency photocatalysts based on mesoporous Pt-WO3 nanohybrids.

Zhenhai Wen,Wei Wu,Zhuang Liu,Hao Zhang,Jinghong Li,Junhong Chen

DOI: https://doi.org/10.1039/c3cp50647a

IF: 3.3

2013-01-01

Physical Chemistry Chemical Physics

Abstract:A reliable nanocasting method has been developed to synthesize mesoporous hybrids of platinum (Pt) nanoparticles decorating tungsten trioxide (WO3). The process began with modification of the SBA-15 template with carbon polymers and Pt nanoparticles accompanied by adsorption of W6+, which was then converted into m-Pt-WO3 composites by heat treatment and subsequent template removal. The synthetic strategy can be easily extended to prepare other mesoporous nanohybrids with metal oxide loaded precious metal composites. Comprehensive characterizations suggest that the as-developed m-Pt-WO3 nanohybrid exhibits unique properties with mesoporous structure, excellent crystalline structure, and high surface area. When the photocatalytic properties of m-Pt-WO3 nanohybrids were systematically investigated, it was revealed that the m-Pt-WO3 nanohybrids showed great promise for degrading the organic dye under visible light irradiation, which shows an excellent photocatalytic activity that far exceeded those of pure phase mesoporous WO3 and commercial TiO2 (P25), and was 10-fold more active than that of the bulk Pt-WO3 catalyst. The as-developed synthetic route opens up a new avenue for designing mesoporous hybrid materials for various applications benefiting from the unique porous structure, high surface area, and synergistic effects among constituents.
Design Synthesis of Low-Silica SAPO-34 Nanocrystals by Constructing Isomorphous Core-Shell Structure: An Effective Catalyst for Improving Catalytic Performances in Methanol-to-Olefins Reaction

Quanhua Wang,Weijiong Dai,Yi Dai,Meng Pan,Yanchao Liu,Lichen Zhang,Jiajun Zheng,Xuguang Liu,Ruifeng Li,Luoning Ma,Hu Wang,Yuhao Zong

DOI: https://doi.org/10.1021/acsami.3c19166

IF: 9.5

2024-03-10

ACS Applied Materials & Interfaces

Abstract:It is well known that low-silica SAPO-34, with an extra porosity (meso- and/or macropores) system, affords excellent catalytic performance in the methanol-to-olefins (MTO) reaction, while the direct synthesis of low-silica SAPO-34 with a hierarchical structure is difficult to achieve, principally because the crystal impurities are usually formed under a low silica content in a gel precursor. Herein, low-silica SAPO-34 nanocrystals were successfully fabricated for the first time by constructing...

materials science, multidisciplinary,nanoscience & nanotechnology
Grinding-induced solvent-free synthesis of mesoporous zirconia-supported tungsten oxide composite and its superior oxidative desulfurization performance

Lina Zhou,Yue Du,Yongxu Jin,Wenxue Chen,Qiyun Pan,Wang Kai,Yisi Liu,Lun Yang,Zhenhui Liu

DOI: https://doi.org/10.1016/j.fuel.2022.123181

IF: 7.4

2022-05-01

Fuel

Abstract:Mesoporous ZrO2 with remarkable pore properties and high crystallinity has demonstrated excellent performance in heterogeneous catalyst fields. Current synthesis of mesoporous ZrO2 is still restricted to the solvent induced self-assembly strategy. Here, a serial of mesoporous zirconia-supported tungsten oxide composites have been synthesized by a polymer-oriented solvent-free self-assembly method. Compared with quaternary ammonium salts cationic surfactant and Pluronic block copolymer, cheap and widely available polyethyleneimine (PEI) polymer has been proved to be a more effective porogen in the solvent-free self-assembly system, which can generate uniform-sized ZrO2 nanoparticles and maintain their porous structure after high temperature calcination. PEI-oriented mesoporous zirconia-supported tungsten oxide composite provides connected channels for reactant and facilitates the homogeneous distribution of tungsten oxide species on mesoporous ZrO2 matrix, which demonstrates excellent catalytic efficiency and stability in oxidative desulfurization (ODS) process. 500 ppm of dibenzothiophene (DBT) can be totally removed within 2 h at 40 °C.

energy & fuels,engineering, chemical
CeO2 Nanowires Self-Inserted into Porous Co3O4 Frameworks As High-Performance “noble Metal Free” Hetero-Catalysts

Xiao Wang,Shuna Zhao,Yibo Zhang,Zhuo Wang,Jing Feng,Shuyan Song,Hongjie Zhang

DOI: https://doi.org/10.1039/c5sc03430b

IF: 8.4

2015-01-01

Chemical Science

Abstract:Recently, mixed metal oxides have attracted tremendous interest because of their great importance for fundamental studies and practical applications in the catalytic field to replace expensive noble metals. Herein, we report the designed synthesis of novel CeO2-Co3O4 mixed metal oxides with complex nanostructures using uniform short CeO2 nanowires self-inserted into ZIF-67 nanocrystals as precursors followed by a thermal annealing treatment. Interestingly, such a synthetic strategy can be easily extended to fabricate other CeO2 nanowires inserted into metal oxide nanoframeworks such as NiCo2O4 and ZnCo2O4. Choosing the NO reduction reaction by CO as the catalytic model, the as-obtained CeO2-Co3O4 hybrids exhibited enhanced catalytic performance, which could be attributed to the strong two-phase interaction between each component.
Synergistic catalytic performance of g-C 3 N 4 /UiO-66 based mesoporous carbons: Synthesis, characterization, and applications in oxidation reactions

Marziesadat Mirhosseyni,Ghodsi Mohammadi Ziarani,Alireza Badiei

DOI: https://doi.org/10.1016/j.diamond.2024.111313

IF: 3.806

2024-06-21

Diamond and Related Materials

Abstract:Todays, the heteroatom-doped mesoporous carbon resulting from Metal-Organic Framework (MOF) has attracted the substantial consideration in various filed especially in the heterogeneous catalytic protocols due to their adaptable features. These materials have a high Specific Surface Area (SSA), which offers copious activated sites for the catalytic activity. The mesoporous nature also simplifies the effectual mass transfer, thereby amplifying the overall catalytic procedure. In this study, a highly effective Zr@NC-T samples were synthesized via pyrolyzing a composite of g-C 3 N 4 and UiO-66. The mesoporous structure of Zr@NC-T, revealed a desired SSA varying from 591.38 to 404.26 m 2 .g −1 due to its surface defect and disorder. Among the synthesized catalysts, Zr@NC-700 (pyrolyzed at 700 °C) exposed preferred catalytic proficiency in the selective oxidation of BnOHs to BnCHO due to its higher surface defect which is caused the higher SSA and structure defect. Furthermore, the Zr@NC-700 catalyst as well proved the acceptable chemical stability due to its reusability.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films
Synthesis, characterization, and catalytic application of hierarchical nano-ZSM-5 zeolite

Yanming Jia,Qinghua Shi,Junwen Wang,Chuanmin Ding,Kan Zhang

DOI: https://doi.org/10.1039/d0ra06040b

IF: 4.036

2020-01-01

RSC Advances

Abstract:The crystal size and strong acid amounts of ZSM-5 decrease and the mesopores increase with increasing of KH-560. High MTA catalytic performance could be obtained under synergistic effect of proper strong acid amount, smaller crystal size and abundant hierarchical structure.

chemistry, multidisciplinary
Facile Synthesis of Zr-Based Functional Materials with Highly Ordered Mesoporous Structures

Quan Yuan,Le-Le Li,Shu-Liang Lu,Hao-Hong Duan,Zhen-Xing Li,Yue-Xiang Zhu,Chun-Hua Yan

DOI: https://doi.org/10.1021/jp806467c

2009-01-01

Abstract:A simple general method has been developed for the synthesis of Zr-based multicomponent functional materials with highly ordered mesoporous structure, including pure zirconia, ceria-zirconia solid solutions, yttria-stabilized zirconia, and scandia-stabilized zirconia. Amphiphilic poly(alkylene oxide) block copolymers serve as structure-directing agents (SDAs). More importantly, the whole process is self-adjusting to organize the network-forming metal oxide species without any additional acid or base. Small-angle X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements show that these mesoporous Zr-based materials possess 2D hexagonal mesostructure (p6mm) with large-domain order and crystalline walls. Nitrogen sorption isotherms reveal that these materials have large surface areas, pore volumes, and narrow pore size distributions. The introduction of the second metal species to the Zr-based system enhances the thermal stability of the mesostructures, and in certain cases, they are resistant to high temperature up to 700 C. All features above of these Zr-based mesoporous materials promise the various potentials in heterogeneous catalysis, solid oxide fuel cells (SOFCs), oxygen sensors, and so forth. With the selection of the hydrogenation of benzene as a test reaction, the representative mesoporous ZrO2 and Ce0.5Zr0.5O2 loaded with ruthenium demonstrate their potentials in catalysis.
A facile route to ordered mesoporous-alumina-supported catalysts, and their catalytic activities for CO oxidation.

Zhen-Xing Li,Fu-Bo Shi,Le-Le Li,Tao Zhang,Chun-Hua Yan

DOI: https://doi.org/10.1039/c0cp01309a

IF: 3.3

2011-01-01

Physical Chemistry Chemical Physics

Abstract:Well-dispersed noble metal nanoparticles can be synthesized, and further stabilized under high treatment temperature, by the confinement effect of ordered mesoporous alumina.
Mesoporous zirconia nanobelts: Preparation, characterization and applications in catalytical methane combustion

Qi-Xiu Gao,Xiao-Fang Wang,Xing-Cai Wu,You-Rong Tao,Jun-Jie Zhu

DOI: https://doi.org/10.1016/j.micromeso.2011.03.019

IF: 5.876

2011-01-01

Microporous and Mesoporous Materials

Abstract:Mesoporous ZrO2 nanobelts (MZNs) have been prepared by a calcination route of ZrS3 nanobelts in air. The nanobelts prepared at 400–600°C are the mixtures of tetragonal and monoclinic phases, and have well-distributed mesopores (pore diameter of about 3.4–3.6nm). As the calcination temperature increased from 400 to 1200°C, the structures changed from tetragonal to monoclinic phase, while the morphologies turned from regular nanobelts to bead-like nanowires, and the mesopores disappeared bit by bit. Fe-doped and Fe2O3-loaded MZNs have been prepared to compare the catalytic activities of Fe-doped, Fe2O3-loaded, and pure MZNs for methane combustion. The results showed that Fe2O3-loaded MZNs have rather high catalytic activity, suggesting its potential application in practice. Methane combustion data over the catalysts are well fitted by a first-order kinetic expression.
Porous MoWN/MoWC@N C Nano-octahedrons synthesized via confined carburization and vapor deposition in MOFs as efficient trifunctional electrocatalysts for oxygen reversible catalysis and hydrogen production in the same electrolyte

Chao Feng,Yuehong Xie,Shanshan Qiao,Yuan Guo,Shiang Li,Li Zhang,Wei Wang,Jide Wang

DOI: https://doi.org/10.1016/j.jcis.2021.05.133

IF: 9.9

2021-11-01

Journal of Colloid and Interface Science

Abstract:We used a simple MOFs-assisted synthesis strategy based on the encapsulation and in-situ carburizing reaction of Cu-based metallic organic frameworks (NENU-5) to synthesize porous nano-octahedral materials, MoWN/CTs (T = 700, 800, and 900). Together with the vapor deposition strategy, the volatile nitrogen species from the pyrolysis of dicyandiamide were captured by the nano-octahedral materials, and formed tungsten-molybdenum-based carbonitride nanocrystals encapsulated in nitrogen-doped carbon. The porous nano-octahedron has a unique heterostructure composed of Mo2N/MoC/W2N/WC. The representative MoWN/C800 showed trifunctional electrocatalytic activity in oxygen reduction reaction/oxygen evolution reaction/hydrogen evolution reaction (ORR/OER/HER) in an alkaline medium (0.1 M KOH). The total oxygen electrode activity index ΔE = 0.795 V (vs. RHE) was found in OER/ORR, and the material also exhibits excellent HER performance. The minimum potential of −0.17 V (vs. RHE) was provided at a current density of −10 mA cm−2. MoWN/C800 showed excellent cycle stability and durability in ORR/OER/HER with the same electrolyte (0.1 M KOH). More importantly, MoWN/C800 could be used to construct high-performance zinc-air batteries and sued for driving electrocatalytic water splitting in a self-powered manner. The successful preparation of the materials indicate that the synthetic strategy provides new reference ideas for developing functional materials with high catalytic properties for various applications.

chemistry, physical
Facile Synthesis Of Pure Monoclinic And Tetragonal Zirconia Nanoparticles And Their Phase Effects On The Behavior Of Supported Molybdena Catalysts For Methanol-Selective Oxidation

Weizhen Li,Hua Huang,Hongjia Li,Wei Zhang,Haichao Liu

DOI: https://doi.org/10.1021/la800370r

IF: 3.9

2008-01-01

Langmuir

Abstract:Pure monoclinic (m) and tetragonal (t) zirconia nanoparticles were readily synthesized from the reaction of inorganic zirconium salts (e.g., hydrated zirconyl nitrate) and urea in water and methanol, respectively, via a facile solvothermal method. The role of the solvents was crucial in the formation of the pure ZrO2 phases, whereas their purity was essentially insensitive to other variables, including reaction temperature, reactant concentration, pH, and zirconium salts. Water as the solvent led to the transformation of hydrous ZrO2 precipitates initially formed with tetragonal structures to thermodynamically more stable m-ZrO2 via the dissolution-precipitation process, whereas methanol favored the removal of water molecules from the precursors via their reaction with urea, consequently maintaining the tetragonal structures. The obtained tetragonal samples were found to possess superior hydrothermal stability compared to those reported previously, which provides the possibility for systematically studying the effects of ZrO2 phases on many catalytic reactions involving water as a reactant or product. Using these pure m- and t-ZrO2 phases as supports, dispersed MoO, catalysts were synthesized at MoOx surface densities of similar to 5.0 Mo/nm(2), which is close to one monolayer of coverage. Characterization by X-ray diffraction and Raman spectroscopy confirmed that the pure ZrO2 phases remained unchanged in the presence of the MoOx domains and the MoO. domains existed preferentially as 2D polymolybdate structures. The catalysts were subsequently examined for selective methanol oxidation as a test reaction. m-ZrO2 support led to 2-fold greater oxidation rates than for t-ZrO2 support, reflecting the higher intrinsic reactivity of the MoO, domains on m-ZrO2. This is consistent with their higher reducibility probed by temperatureprogrammed reduction with H-2 (H-2 TPR). These observed effects of the ZrO2 phases provide the basis for designing catalysts with tunable redox properties and reactivity.
Fabrication of a ZIF-on-lamella-zeolite architecture as a highly efficient catalyst for aldol condensation

Tianlong Wang,Lin-An Liu,Huifang Wu,Jiaxing Zhang,Ziyi Feng,Xin Yan,Xinyu Wang,Guoying Han,Xiao Feng,Limin Ren,Xinwen Guo

DOI: https://doi.org/10.1039/d4dt00288a

2024-03-12

Abstract:Designing composite catalysts that harness the strengths of individual components while mitigating their limitations is a fascinating yet challenging task in catalyst engineering. In this study, we aimed to enhance the catalytic performance by anchoring ZIF-67 nanoparticles of precise sizes onto lamella Si-MWW zeolite surfaces through a stepwise regrowth process. Co ions were initially grafted onto the zeolite surface using ultrasonication, followed by a seed-assisted secondary growth method. Si-MWW proved to be the ideal zeolite support due to its thin layered structure, large external surface area and substantial lateral dimensions. The abundant Si-OH groups on its surface played a crucial role in securely binding Co ions, limiting size growth and preventing undesirable ZIF-67 aggregation. The resulting ZIF-67/MWW composite with finely dispersed nano-scale ZIF-67 particles exhibited a remarkable catalytic performance and stability in the aldol condensation reactions involving acetone and various aldehydes. This approach holds promise for designing MOF/zeolite composite catalysts.

Mesoporous nano-WO<sub>x</sub>/ZrO<sub>2</sub>: facile synthesis and improved catalysis

Mesoporous Nano-Wox/Zro2: Facile Synthesis and Improved Catalysis

Controllable Multicomponent Co‐Assembly Approach to Ordered Mesoporous Zirconia Supported with Well‐Dispersed Tungsten Oxide Clusters As High‐Performance Catalysts

C-Axis-penetrated Mesoporous MWW Zeolite Nanosheets: Preparation by H2O2-induced Micro-Explosion and Their Enhanced Properties

Preparation and Characterization of WOx/ZrO2 Nanosized Catalysts with High WOx Dispersion Threshold and Acidity

MOF derived mesoporous K-ZrO2 with enhanced basic catalytic performance for Knoevenagel condensations

Preparation of mesoporous nanocrystalline tetragonal zirconia for catalytic methane combustion

c -Axis-penetrated mesoporous MWW zeolite nanosheets: preparation by H 2 O 2 -induced micro-explosion and their enhanced properties

Synthesis of mesoporous nanocrystalline Co<sub>3</sub>O<sub>4</sub> via an easy and inexpensive method

Ultrahigh-efficiency photocatalysts based on mesoporous Pt-WO3 nanohybrids.

Design Synthesis of Low-Silica SAPO-34 Nanocrystals by Constructing Isomorphous Core-Shell Structure: An Effective Catalyst for Improving Catalytic Performances in Methanol-to-Olefins Reaction

Grinding-induced solvent-free synthesis of mesoporous zirconia-supported tungsten oxide composite and its superior oxidative desulfurization performance

CeO2 Nanowires Self-Inserted into Porous Co3O4 Frameworks As High-Performance “noble Metal Free” Hetero-Catalysts

Synergistic catalytic performance of g-C 3 N 4 /UiO-66 based mesoporous carbons: Synthesis, characterization, and applications in oxidation reactions

Synthesis, characterization, and catalytic application of hierarchical nano-ZSM-5 zeolite

Facile Synthesis of Zr-Based Functional Materials with Highly Ordered Mesoporous Structures

A facile route to ordered mesoporous-alumina-supported catalysts, and their catalytic activities for CO oxidation.

Mesoporous zirconia nanobelts: Preparation, characterization and applications in catalytical methane combustion

Porous MoWN/MoWC@N C Nano-octahedrons synthesized via confined carburization and vapor deposition in MOFs as efficient trifunctional electrocatalysts for oxygen reversible catalysis and hydrogen production in the same electrolyte

Facile Synthesis Of Pure Monoclinic And Tetragonal Zirconia Nanoparticles And Their Phase Effects On The Behavior Of Supported Molybdena Catalysts For Methanol-Selective Oxidation

Fabrication of a ZIF-on-lamella-zeolite architecture as a highly efficient catalyst for aldol condensation