Abstract:The methanol-to-olefin (MTO) process is important because it offers an alternative to the conventional oil route for the conversion of natural gas or coal to light olefins. The most promising catalysts for the MTO reaction are solid acids with a zeolite structure, where reactants and products such as ethylene and propylene may freely diffuse through active catalysts, but products with larger kinetic diameters are trapped within the cages. In this work, SAPO-34 molecular sieves were synthesized by hydrothermal crystallization, using triethylamine (TEA) as the template. These samples were characterized by X-ray diffraction, scanning electron microscopy, thermo-gravimetric analysis-differential scanning calorimetry, energy dispersive spectroscopy, Fourier transform-infrared (FT-IR) and N(2) adsorption-desorption. The effects of template concentration and crystallization time on the physicochemical properties and catalytic performance were investigated. The crystallinity and morphology of SAPO-34 were influenced by the concentration of the template. Pure SAPO-34 was obtained when the TEA/Al(2)O(3) molar ratio was higher than 2.0. With increased crystallization time, the Si content in SAPO-34 crystals increased, which influenced the surface acidity. FT-IR spectra indicated that all samples were dominated by Lewis acid sites and the sample crystallized for 11 h exhibited the lowest number of Lewis acid sites. The catalytic performance of SAPO-34 was tested with the MTO reaction. High selectivity to olefins (C(2)H(4) + C(3)H(6)) was obtained over the catalyst synthesized with a TEA/Al(2)O(3) ratio of 3.0 and crystallization time of 11 h. At the reaction temperature of 450 degrees C, the methanol conversion approached 100% and the yield of C(2)-C(4) olefins was more than 80%. Hence, SAPO-34 molecular sieves were shown to be excellent catalysts for the MTO reaction. (C) 2010 Curtin University of Technology and John Wiley & Sons, Ltd.

Design Synthesis of Low-Silica SAPO-34 Nanocrystals by Constructing Isomorphous Core-Shell Structure: An Effective Catalyst for Improving Catalytic Performances in Methanol-to-Olefins Reaction

Synthesis of CuO–ZnO–Al2O3 @ SAPO-34 Core@shell Structured Catalyst by Intermediate Layer Method

Core-shell SAPO-34@ZSM-5 composite via in situ solid-solid transformation of pre-coating MCM-41 shell and its application in methanol-to-olefins

Synergic regulation of crystalline phase, composition and morphology of SAPO-34 via metal assistance and in situ etching strategy

Synthesis of SAPO-34 nanocrystallites by epoxy-functional organosilane with improved MTO catalytic performance

Hierarchical Low-Silica SAPO-34 with Enhanced MTO Performance: Mesopore Template- and Fluoride-Free Synthesis

Bifunctional Catalysts Composed of Low Silicon‐content SAPO‐34 Nanosheets and in 2 O 3 /zro 2 with Improved Performance for CO 2 Hydrogenation

Facile surfactant-assisted synthesis of nanosheet-like mesoporous SAPO-34 zeolites and catalysis performance for methanol to olefins

Controlled synthesis of high performance SAPO-34 with sheet-like morphology and small particle size using concentrated gel system

A rapid and eco-friendly approach for the synthesis of low-silica SAPO-34 with excellent MTO catalytic performance

Hierarchical Sapo-34/18 Zeolite with Low Acid Site Density for Converting Methanol to Olefins

Synthesis of hierarchical SAPO-34 to improve the catalytic performance of bifunctional catalysts for syngas-to-olefins reactions

Seed-assisted synthesis of hierarchical SAPO-18/34 intergrowth and SAPO-34 zeolites and their catalytic performance for the methanol-to-olefin reaction

Optimization of Conditions for Preparation of ZSM-5@silicalite-1 Core–shell Catalysts Via Hydrothermal Synthesis

In Situ Synthesis of SAPO-34 Zeolites in Kaolin Microspheres for a Fluidized Methanol or Dimethyl Ether to Olefins Process

Synthesis, characterization and catalytic performance of SAPO-34 molecular sieves for methanol-to-olefin (MTO) reaction

Synthesis of mesoporous SAPO-34 zeolite from mesoporous silica materials for methanol to light olefins

Facile in situ hydrothermal crystallization synthesis of SAPO-34/ZSM-5 composite catalyst for methanol to olefin reaction

Synthesis of nano-sized SAPO-34 using a facile micron-meter seed processing method and their enhanced performance in methanol-to-olefin reactions

A highly efficient SAPO-34 catalyst for improving light olefins in methanol conversion: Insight into the role of hierarchical porosities and tailoring acid properties based on in situ NH3-poisoning

Novel method for gel preparation of amine-templated SAPO-34: fractured crystals for enhanced methanol-to-olefin catalysis