Colloidal synthesis of wurtz-stannite Cu<sub>2</sub>CdGeS<sub>4</sub>nanocrystals with high catalytic activity toward iodine redox couples in dye-sensitized solar cells

Shoushuang Huang,Jiantao Zai,Dui Ma,Qingquan He,Yuanyuan Liu,Qiquan Qiao,Xuefeng Qian

DOI: https://doi.org/10.1039/c6cc05163d

IF: 4.9

2016-01-01

Chemical Communications

Abstract:Wurtz-stannite Cu2CdGeS4nanocrystals were synthesizedviaa facile hot-injection method at a low temperature.

What problem does this paper attempt to address?

Controlled Synthesis of Wurtzite CuInS2 Nanocrystals and Their Side-by-side Nanorod Assemblies

Xiaotang Lu,Zhongbin Zhuang,Qing Peng,Yadong Li

DOI: https://doi.org/10.1039/c0ce00451k

IF: 3.756

2011-01-01

CrystEngComm

Abstract:Wurtzite CuInS2 nanocrystals have been synthesized by direct reaction of copper nitrate, indium nitrate and dodecanethiol. The size and shape of the nanocrystals could be elaborately controlled by varying the Cu/In ratio and additional ligands other than dodecanethiol, such as oleylamine and oleic acid. Especially, the nanorods obtained under a Cu/In raw material ratio of 2 : 1 with the assistance of both dodecanethiol and oleic acid have good uniformity. They could further assemble into large-scale superlattices on substrates by solvent evaporation method. On the other hand, the optical property studies of the nanocrystals show that the band gap of wurtzite CuInS2 is 1.63 eV, which is optimal for solar cell applications. This report provides valuable insight into the controlled synthesis of ternary I-III-VI2 semiconductors and the assembly process, packing them into oriented films.
Colloidal Nanocrystals of Wurtzite-Type Cu2znsns4: Facile Noninjection Synthesis and Formation Mechanism

Michelle D. Regulacio,Chen Ye,Suo Hon Lim,Michel Bosman,Enyi Ye,Shiyou Chen,Qing-Hua Xu,Ming-Yong Han

DOI: https://doi.org/10.1002/chem.201103635

2012-01-01

Chemistry

Abstract:Crystal clear: Cu2ZnSnS4 (CZTS) is a promising light-absorbing material for solar cells. A facile noninjection route to preparing monodisperse nanocrystalline CZTS that exhibits a wurtzite-derived crystal structure is reported (see figure), and insights into the mechanism of its formation are given. In addition, a simple approach to phase-selective synthesis of CZTS by varying the organic surfactants used in the synthesis is demonstrated. Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.
Wurtzite CuIn(S x Se 1- x ) 2 Nanocrystals: Colloidal Synthesis and Band-Gap Engineering

Bingqian Zu,Song Chen,Qiren Jin,Zilong Xu,Xudong Wu,Liang Wu

DOI: https://doi.org/10.1021/acs.inorgchem.4c04140

IF: 4.6

2024-11-02

Inorganic Chemistry

Abstract:CuIn(S(x)Se(1-x))(2) nanocrystals as an emerging class of functional materials present huge potential for industrial applications; however, the synthesis of CuIn(S(x)Se(1-x))(2) nanocrystals remains a formidable challenge in achieving both tunable band gap and phase. Here, we reported a facile hot-injection method for synthesizing a family of wurtzite CuIn(S(x)Se(1-x))(2) nanocrystals, enabling manipulation of the S and Se contents across the entire compositional range (0 ≤ x ≤ 1). The obtained...

chemistry, inorganic & nuclear
Facile synthesis of Cu2ZnSnS4 nanocrystals and its use for dye-sensitized solar cells applications

Lixia Li,BinLei Zhang,Meng Cao,Yan Sun,Jiang Jiang,P. F. Hu,Yue Shen,Linjun Wang

DOI: https://doi.org/10.1016/j.jallcom.2012.10.068

IF: 6.2

2013-01-01

Journal of Alloys and Compounds

Abstract:Cu2ZnSnS4 (CZTS) nanocrystals were synthesized with a simple solution method. The effects of the amount of oleylamine, the quantity of zinc salt precursor and reaction time on the structure, composition, morphology and optical properties of the nanocrystals were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray analysis (EDX) measurements. The zinc content in the nanocrystals increases with the increasing of the amount of oleylamine and the quantity of ZnCl2 precursor. But the particle sizes were influenced mainly by the reaction time. For dye-sensitized solar cells (DSSCs) using CZTS nanocrystals as the dye layer, the JSC was greatly decreased with the increasing of the sizes of the nanocrystals. Synthesis of small and uniformly dispersed CZTS nanocrystals was beneficial to enhance the power conversion efficiency of the DSSCs. © 2012 Elsevier B.V. All rights reserved.
Facile synthesis of ultrafine Cu2ZnSnS4 nanocrystals by hydrothermal method for use in solar cells

Wenchao Liu,Binglei Guo,Cheeleung Mak,Aidong Li,Xiaoshan Wu,Fengming Zhang

DOI: https://doi.org/10.1016/j.tsf.2012.11.073

IF: 2.1

2013-01-01

Thin Solid Films

Abstract:We introduce a hydrothermal method for synthesizing ultrafine earth abundant Cu2ZnSnS4 (CZTS) nanocrystals with an average size of 5–6nm using simple Cu(II), Zn(II), Sn(II) inorganic salt and thiourea as precursor. X-ray diffraction, Raman spectrum and transmission electron microscopy studies indicate that CZTS nanocrystals with pure kesterite structure have been synthesized at temperature as low as 180°C. The band-gap energy determined from the absorbance spectrum is 1.47eV, suggesting that as-synthesized CZTS nanocrystals are very suitable for photovoltaic applications.
Colloidal synthesis of monodisperse quaternary CuInSSe nanocrystals

Yu Zou,Dongsheng Li,Deren Yang

DOI: https://doi.org/10.1016/j.matchemphys.2011.12.026

IF: 4.778

2012-01-01

Materials Chemistry and Physics

Abstract:Quaternary CuInSSe nanocrystals have been synthesized by a colloidal route using commercially available materials. Oleylamine is used as the solvent and capping agent. It is proved that the nanocrystals are alloyed nanocrystals rather than a mixture of CuInS2 and CuInSe2 nanocystals. Furthermore, their formation is regarded to involve the nucleation of CuS and the subsequent reaction between CuS nuclei and remaining precursors. It is also found that the composition and structure of the nanocrystals can be influenced significantly by the reaction temperatures and time. © 2011 Elsevier B.V. All rights reserved.
Colloidal Nanocrystals of Orthorhombic Cu2znges4: Phase-Controlled Synthesis, Formation Mechanism and Photocatalytic Behavior

Cong-Min Fan,Michelle D. Regulacio,Chen Ye,Suo Hon Lim,Shun Kuang Lua,Qing-Hua Xu,Zhili Dong,An-Wu Xu,Ming-Yong Han

DOI: https://doi.org/10.1039/c4nr07012g

IF: 6.7

2015-01-01

Nanoscale

Abstract:The orthorhombic polymorph of Cu2ZnGeS4 (CZGS) is a metastable wurtzite-derived phase that can only be prepared in the bulk form by extensive heating at high temperatures (≥790 °C) when using the conventional solid-state reaction route. By employing a facile solution-based synthetic strategy, we were able to obtain phase-pure orthorhombic CZGS in nanocrystalline form at a much lower reaction temperature. Prior to this work, the colloidal synthesis of single-phase orthorhombic CZGS on the nanoscale has never been reported. We find that the use of an appropriate combination of coordinating solvents and precursors is crucial to the sole formation of this metastable phase in solution. A possible formation mechanism is proposed on the basis of our experimental results. Because CZGS consists of environmentally benign metal components, it is regarded as a promising alternative material to the technologically useful yet toxic cadmium-containing semiconductors. The orthorhombic CZGS nanocrystals display strong photon absorption in the visible spectrum and are photocatalytically active in dye degradation under visible-light illumination.
Wurtzite Cu 2ZnSnS 4 nanocrystals: A novel quaternary semiconductor

Xiaotang Lü,ZhongBin Zhuang,Qing Peng,Yadong Li

DOI: https://doi.org/10.1039/c0cc05064d

IF: 4.9

2011-01-01

Chemical Communications

Abstract:A new wurtzite phase Cu2ZnSnS4 was discovered and the corresponding nanocrystals have been successfully synthesized. They have been characterized in detail and showed the photoelectric response, which demonstrated their potential in the application of photovoltaic devices.
Octahedron Shaped Lead Sulfide Nanocrystals As Counter Electrodes for Quantum Dot Sensitized Solar Cells

Tingting Xu,Jinglu Hu,Pengli Wei,Xiulan Qin,Tao Huang,Lixin Chen,Hongjing Wu

DOI: https://doi.org/10.1142/s179360471850025x

IF: 1.4901

2018-01-01

Functional Materials Letters

Abstract:PbS nanocrystals with octahedron shape are synthesized by a low temperature approach with presence of cation/anion surfactants in aqueous solution. CdS quantum dot sensitized solar cells (QDSSCs) based on these novel octahedron shaped PbS counter electrodes (CEs) are fabricated for the first time, achieving PCE of 1.54%. It is observed that the octahedron shaped PbS CE shows higher electrocatalytic activity compared with the Pt CE, indicating that the PbS nanocrystals with a uniformly distributed size is a superior candidate as CEs for QDSSCs application. This work may provide new route for preparing PbS from aqueous solvent medium through a simple synthesis route.
Synthesis of Highly Monodisperse Cu2O Nanocrystals and Their Applications as Hole-Transporting Layers in Solution-Processed Light-Emitting Diodes.

Desui Chen,Yifei Li,Xingliang Dai,Hui Du,Jian Lin,Yizheng Jin

DOI: https://doi.org/10.1002/chem.201903094

2019-01-01

Chemistry - A European Journal

Abstract:The synthesis of phase-pure, narrow-size-distributed and highly stable Cu2O nanocrystals is reported, which can be processed as hole-transporting layers (HTLs) in solution-processed optoelectronic devices. The synthesis is based on a thermal decomposition process with a ligand protection strategy. The reactivity of precursor can be tuned by simply modulating the concentration of oleylamine in non-coordinated solvent, resulting in effectively controlling the size and size distribution of Cu2O nanocrystals. Combined with ligand protection strategy of using lithium stearate and moderate reaction temperature of 170 degrees C, in situ aggregation of Cu2O nanocrystals could be inhibited, exhibiting excellent stability in hexane for several months. The resulting phase-pure colloidal Cu2O particles (after ozone-treatment) were applied as HTLs in polymer light-emitting diodes, the performance of which are comparable to that of the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) based devices.
From One-Dimensional to Two-Dimensional Wurtzite CuGaS2nanocrystals: Non-Injection Synthesis and Photocatalytic Evolution

Zheming Liu,Jun Liu,Yanbin Huang,Jing Li,Yi Yuan,Haihang Ye,Dongxu Zhu,Zhijie Wang,Aiwei Tang

DOI: https://doi.org/10.1039/c8nr07353h

IF: 6.7

2019-01-01

Nanoscale

Abstract:Multinary copper-based chalcogenides exhibit significant performance in photocatalytic hydrogen evolution due to their suitable optical bandgap for visible light absorption and environmentally friendly character. Herein, high-quality wurtzite CuGaS2 (CGS) nanocrystals (NCs) were synthesized by using a one-step heating-up process without any injection, and the morphology could be tuned from one-dimensional (1D) to two-dimensional (2D) by precise choice of surface ligands and gallium precursors. The formation mechanism of CGS NCs was studied comprehensively by means of the temporal-evolution of the morphology, crystal structure and optical absorption results. The reaction started from djurleite Cu31S16 NCs, and then proceeded with the formation of Cu31S16-CGS heteronanostructures (HNS), and finally the transformation from HNS to monophasic CGS nanorods took place with prolonging of the synthesis time. The optical bandgap and the energy level of the different-dimensional CGS NCs exhibited a strong dependence on the morphology change, which correlated with the percentage of the exposed {001} and {100} facets. The theoretical calculation based on density functional theory (DFT) revealed that the (001) surface facilitated the charge transport rather than the (100) surface, which was consistent with the electrochemical impedance spectroscopy (EIS) results. As a result, the 2D CGS nanoplates with more exposed {001} facets exhibited an attractive photocatalytic hydrogen production activity under simulated solar illumination as compared to 1D and quasi-2D counterparts. This study demonstrates that control over the dimension of I-III-V group semiconductor NCs could lead to a significant improvement of the photocatalytic hydrogen evolution.
Internal Iliac Arterial Infusion Chemotherapy for Rabbit Invasive Bladder Cancer

S. Hoshi,Hauping Mao,Toshiko Takahashi,Kenichi Suzuki,M. Nose,S. Orikasa

DOI: https://doi.org/10.1111/j.1442-2042.1997.tb00292.x

1997-09-01

International Journal of Urology

Abstract:Background:
Single-crystal Cobalt Selenide Nanobelt As a Highly Efficient Cathode for Stable Quasi-Solid-state Dye Sensitized Solar Cell

Chuanqi Feng,Guanyu Zhao,Yaru Li,Haoliang Cheng,Zhong-Sheng Wang

DOI: https://doi.org/10.1016/j.jpowsour.2019.04.036

IF: 9.2

2019-01-01

Journal of Power Sources

Abstract:We present herein the synthesis of single-crystal Co0.85Se nanobelt through a triethylenediamine-assisted solvothermal reaction. When it is applied as the counter electrode for quasi-solid-state dye sensitized solar cell, the single-crystal Co0.85Se nanobelt counter electrode exhibits excellent electrocatalytic performance for the reduction of I3−, which is attributed to the single-crystal nature and unique two-dimensional structure. As compared to the polycrystalline Co0.85Se, the single-crystal Co0.85Se has higher conductivity, thus exposing more active sites for electrocatalysis. The quasi-solid-state dye-sensitized solar cell with the single-crystal Co0.85Se nanobelt cathode achieves a power conversion efficiency of 9.06%, which shows significant advantages over polycrystalline Co0.85Se counter electrode that yields efficiency of 7.87% and even surpasses the Pt control (7.67%). More importantly, the quasi-solid-state dye-sensitized solar cell based on the single-crystal Co0.85Se nanobelt counter electrode presents excellent long-term stability under one-sun soaking.
Colloidal Cu2ZnSnS4 nanocrystals generated by a facile route using ethylxanthate molecular precursors

yufeng liu,meiying ge,yang yue,yan sun,yizheng wu,xin chen,ning dai

DOI: https://doi.org/10.1002/pssr.201004528

2011-01-01

Abstract:We have demonstrated a flexible method for preparing Cu2ZnSnS4 (CZTS) nanocrystals by use of zinc ethylxanthate (Zn(ex)(2)) and copper ethylxanthate (Cu(ex)(2)). TEM, SEM, XRD, UV-vis, EDS, XPS and TG-DTA indicate that the CZTS nanocrystals have been successfully synthesized. As air-stable molecular precursors, Zn(ex)(2) and Cu(ex)(2) can optimize the synthesis of quaternary CZTS nanocrystals because Cu(ex)(2) and Zn(ex)(2) facilitate the formation of homogeneous precursor solutions including all precursors and then for the flexible production of CZTS nanocrystals in homogeneous reaction solutions. (C) 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Optical and Electrical Properties of Uniform Non-Toxic Cu2ZnSnS4 Nanocrystal and Its Application in Solar Cells

Kentaro Abe,Heping Shen,Xin Li,Lin Zhao,Xingyue Zhao,Jianbao Li,Mitsumasa Iwamoto,Hong Lin

DOI: https://doi.org/10.1016/j.poly.2014.05.072

IF: 2.975

2014-01-01

Polyhedron

Abstract:Cu2ZnSnS4 (CZTS) nanocrystals were synthesized successfully by two hot-injection methods, for which it was found that the temperature for sulfur precursor injection is an important factor to determine the morphology of nanocrystals. Injection carried out at a lower temperature lead to more homogeneous samples. Pure kesterite CZTS with diameter of about 15–20nm was achieved confirmed by comprehensive characterizations including TEM, XRD, Raman, and XPS. Besides, CZTS nanocrystal based thin film, which was fabricated by solution process, exhibited a hole mobility of 4.3×10−2cm2/V-s. The film was then successfully incorporated into a Schottky solar cell, yielding an open circuit voltage of about 300mV. It is notable that this was the first time that the completely nontoxic Schottky solar cell was achieved based on CZTS nanocrystal, which was fabricated completely under room temperature.
Facile synthesis and characterization of CuInS2 nanocrystals with different structures and shapes

Zhongping Liu,Linlin Wang,Qiaoyan Hao,Dake Wang,Kaibin Tang,Ming Zuo,Qing Yang

DOI: https://doi.org/10.1039/c3ce40631h

IF: 3.756

2013-01-01

CrystEngComm

Abstract:CuInS2 nanocrystals were synthesized by one-pot thermolysis of a mixture solution of metal chlorides, 1-dodecanethiol (DT) and oleic acid in noncoordinating solvent 1-octadecene. Interestingly, in this synthesis, different structures and shapes were obtained by simply varying the dosage of DT. At a low dosage of DT, wurtzite nanoplates formed in the initial reaction stage and then they further grew to nanoplates with wurtzite-zincblende polytypism as the reaction proceeded. On the contrary, a high dosage of DT produced zincblende nanoparticles. The formation processes of nanoplates and nanoparticles were studied and a growth mechanism was proposed. Our research will aid in solution-synthesis of ternary chalcogenide nanocrystals and the development of their optoelectronic devices.
Facile hydrothermal synthesis of hydrotropic Cu2ZnSnS 4 nanocrystal quantum dots: Band-gap engineering and phonon confinement effect

Wenchao Liu,Binglei Guo,Xiaoshan Wu,F. M. Zhang,C. L. Mak,K. H. Wong

DOI: https://doi.org/10.1039/c3ta00357d

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:We developed a facile hydrothermal method for synthesizing ultrafine size-controllable earth-abundant Cu2ZnSnS4 (CZTS) nanocrystals using simple Cu(II), Zn(II) and Sn(II) inorganic salts and thiourea in a mixed ethylenediamine and di-water solution as precursors. X-ray diffraction, Raman scattering and transmission electron microscopy confirm that pure kesterite structure CZTS nanocrystals have been synthesized at temperatures as low as 180 degrees C. Broadening of Raman peaks and blue-shift of the absorption edge is attributed to quantum confinement within the nanocrystals. The hydrophilism and tunable band-gap of the CZTS nanocrystals show the potential applications of the nanocrystals for biological labelling and quantum dot based solar cells.
Low cost hot injection synthesis of wurtzite Cu2ZnSnS4 nanocrystals

Garima Agarwal,Balram Tripathi

DOI: https://doi.org/10.1016/j.matpr.2020.07.369

2021-01-01

Materials Today: Proceedings

Abstract:Herein, It is reported the synthesis of colloidal quaternary chalcogenide Cu2ZnSnS4 (CZTS) nanocrystals (usually 2–10 nm in size) via moderate low cost hot injection method. trioctylphosphine oxide (TOPO) is used as nanocrystal stabilizer. The influence of annealing temperature on the structural and optical properties is studied. Morphology of as prepared nanomaterial is defined by using HRTEM. It is publicised by XRD and TEM measurements that all the prepared samples of nanomaterials enclosed with both kesterite and novel wurtzite phase. The energy bandgap for obtained nanomaterial after annealing at 250 °C is found to be 1.49 eV, which validate its prospective use for solar devices.
Solution-based Synthesis and Characterization of Cu2FeSnS4 Nanocrystals

Liang Li,Xiuyong Liu,Jian Huang,Meng Cao,Shiyou Chen,Yue Shen,Linjun Wang

DOI: https://doi.org/10.1016/j.matchemphys.2012.01.057

IF: 4.778

2012-01-01

Materials Chemistry and Physics

Abstract:Cu2FeSnS4 nanocrystals were cost-effectively synthesized by thermal reactions of metal salts and sulfur in a hot oleylamine solution. Stannite structured Cu2FeSnS4 nanocrystals with diameters of about 15-25 nm were obtained, analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The morphology of the continuous Cu2FeSnS4 thin films was characterized by scanning electron microscopy (SEM) and the average compositions of the nanocrystals were determined by energy dispersive X-ray analysis (EDX). High-resolution X-ray photoemission spectroscopy (XPS) analysis of the four constituent elements indicated Cu (I), Fe (II), Sn (IV) and sulfide ions. The band gap of as-synthesised Cu2FeSnS4 nanocrystals is about 1.33 eV determined by the UV-vis-NIR absorption spectra measurement, which indicates its possible solar cell applications. (C) 2012 Elsevier B.V. All rights reserved.
Synthesis of High-Quality and Self-assembled Cu2ZnSnS4 Nanocrystals

Wang Xiao,Liu Da-Peng,Song Shu-Yan,Liu Yong-Xin,Zhang Hong-Jie

2011-01-01

Abstract:High-quality Cu2ZnSnS4 nanocrystals with narrow size distribution were prepared via a facile hot-injection route by using simple inorganic metallic salt Cu(OAc)(2), Zn(OAc)(2) and SnCl4 as raw materials, stearic acid and octadecylamine as capping molecules and diphenyl ether as solvent. In this paper, we have studied in depth for the influence on the morphologies of the nanocrystals by changing the ratio of stearic acid and octadecylamine. It is shown that Cu2ZnSnS4 nanocrystals grow bigger and have complex nanostructures by increasing the amount of stearic acid. And this material has a strong absorption under the whole region from UV to visible lights. It is believed that Cu2ZnSnS4 has a potential application in photovoltaic devices.

Colloidal synthesis of wurtz-stannite Cu<sub>2</sub>CdGeS<sub>4</sub>nanocrystals with high catalytic activity toward iodine redox couples in dye-sensitized solar cells

Controlled Synthesis of Wurtzite CuInS2 Nanocrystals and Their Side-by-side Nanorod Assemblies

Colloidal Nanocrystals of Wurtzite-Type Cu2znsns4: Facile Noninjection Synthesis and Formation Mechanism

Wurtzite CuIn(S x Se 1- x ) 2 Nanocrystals: Colloidal Synthesis and Band-Gap Engineering

Facile synthesis of Cu2ZnSnS4 nanocrystals and its use for dye-sensitized solar cells applications

Facile synthesis of ultrafine Cu2ZnSnS4 nanocrystals by hydrothermal method for use in solar cells

Colloidal synthesis of monodisperse quaternary CuInSSe nanocrystals

Colloidal Nanocrystals of Orthorhombic Cu2znges4: Phase-Controlled Synthesis, Formation Mechanism and Photocatalytic Behavior

Wurtzite Cu 2ZnSnS 4 nanocrystals: A novel quaternary semiconductor

Octahedron Shaped Lead Sulfide Nanocrystals As Counter Electrodes for Quantum Dot Sensitized Solar Cells

Synthesis of Highly Monodisperse Cu2O Nanocrystals and Their Applications as Hole-Transporting Layers in Solution-Processed Light-Emitting Diodes.

From One-Dimensional to Two-Dimensional Wurtzite CuGaS2nanocrystals: Non-Injection Synthesis and Photocatalytic Evolution

Internal Iliac Arterial Infusion Chemotherapy for Rabbit Invasive Bladder Cancer

Single-crystal Cobalt Selenide Nanobelt As a Highly Efficient Cathode for Stable Quasi-Solid-state Dye Sensitized Solar Cell

Colloidal Cu2ZnSnS4 nanocrystals generated by a facile route using ethylxanthate molecular precursors

Optical and Electrical Properties of Uniform Non-Toxic Cu2ZnSnS4 Nanocrystal and Its Application in Solar Cells

Facile synthesis and characterization of CuInS2 nanocrystals with different structures and shapes

Facile hydrothermal synthesis of hydrotropic Cu2ZnSnS 4 nanocrystal quantum dots: Band-gap engineering and phonon confinement effect

Low cost hot injection synthesis of wurtzite Cu2ZnSnS4 nanocrystals

Solution-based Synthesis and Characterization of Cu2FeSnS4 Nanocrystals

Synthesis of High-Quality and Self-assembled Cu2ZnSnS4 Nanocrystals