Abstract:The current investigation dealt with the synthesis of Nickel Oxide (NiO) nanoparticles with excellent surface modification using Manganese (Mn) doping via co-precipitation route alongside varying the sintering temperature. The prepared NiO and Manganese doped NiO (Mn–NiO) were characterized to analyze structural, elemental, morphological, optical and gas sensing studies. The research reveals noticeable sensing characteristics for a variety of volatile organic compounds, exclusively for Formaldehyde (HCHO) gases. The diffraction patterns obtained from X-ray diffraction analysis match up to the face-centred cubic phase of NiO. A redshift in the diffraction angles for Mn–NiO nanostructures compared with pristine NiO proves the presence of Mn ions. The scanning electron microscopy technique depicted NiO holding nanohexagon morphologies while the Mn-doped NiO exhibited sphere-like structures. The electronic states and compositions of the pure and Mn-doped NiO nanomaterials were assessed by X-ray photoelectron spectroscopy which affirms the doping and purity of the NiO and Mn–NiO nanomaterials. Moreover, gas sensor studies of NiO and Mn-doped NiO nanomaterials sintered at various temperatures were tested at room temperatures and different concentrations of the formaldehyde (HCHO) gas. The optimized sintering temperatures for pure NiO and doped NiO nanomaterials based on formaldehyde sensors were 500 °C. For 100 ppm concentration, NiO (300 °C), NiO (500 °C), NiO (700 °C) and Mn–NiO (300 °C), Mn–NiO (500 °C), Mn–NiO (700 °C) gas sensors displayed gas responses of 105.43, 3013.5, 83.43, 793.74, 12593, 4698.1 respectively at room temperature. Hence, Mn-doped NiO nanospheres sintered at 500 °C based formaldehyde sensor displayed appreciable response than sensors based on pure NiO and Mn-doped NiO sintered at 500 °C and 700 °C.

Gas Sensitivity of MnO<sub>2</sub> Doped Nano ZnO Coplanar Plate-Type Gas Sensor Arrays

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Enhanced gas sensing properties for formaldehyde based on ZnO/Zn2SnO4 composites from one-step hydrothermal synthesis

Improved Sensitivity of α-Fe2O3 Nanoparticle-Decorated ZnO Nanowire Gas Sensor for CO

High sensitivity and fast response sensor for formaldehyde based on In2O3/Sn2O3 heterojunction

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

High response to formaldehyde gas and ppb-level detectability of nanoparticle Cr2O3/ porous cubic ZnSnO3 composites p-n heterojunction gas sensor

A highly efficient room-temperature formaldehyde gas sensor based on a Ni-doped ZnO hierarchical porous structure decorated with NiS illuminated by UV light

A high-response formaldehyde sensor based on fibrous Ag-ZnO/In2O3 with multi-level heterojunctions

Manganese doped nickel oxide as room temperature gas sensor for formaldehyde detection

Rich defects and nanograins boosted formaldehyde sensing performance of mesoporous polycrystalline ZnO nanosheets

UV activated formaldehyde gas sensing based on gold decorated ZnO@ In 2 O 3 hollow nanospheres at room temperature

Novel porous single-crystalline ZnO nanosheets fabricated by annealing ZnS(en)0.5 (en = ethylenediamine) precursor. Application in a gas sensor for indoor air contaminant detection

Design of a SnO2/Zeolite Gas Sensor to Enhance Formaldehyde Sensing Properties: From the Strategy of the Band Gap-Tunable Zeolite.

Conductometric NO2 Gas Sensors Based on MOF-derived Porous ZnO Nanoparticles

Room-temperature high-performance ammonia gas sensor based on layer-by-layer self-assembled molybdenum disulfide/zinc oxide nanocomposite film

Ultrathin SnO2 Nanosheets with Dominant High-Energy {001} Facets for Low Temperature Formaldehyde Gas Sensor

A p-n Heterojunction Based Pd/PdO@ZnO Organic Frameworks for High-Sensitivity Room-Temperature Formaldehyde Gas Sensor

A miniature room temperature formaldehyde sensor with high sensitivity and selectivity using CdSO4 modified ZnO nanoparticles

Controlled preparation and gas sensitive properties of two-dimensional and cubic structure ZnSnO3

Fabrication of a humidity-resistant formaldehyde gas sensor through layering a molecular sieve on 3D ordered macroporous SnO2 decorated with Au nanoparticles

Gas Sensitivity of MnO&lt;sub&gt;2&lt;/sub&gt; Doped Nano ZnO Coplanar Plate-Type Gas Sensor Arrays