Abstract:Fe3O4/graphene composites with a conductive, porous three-dimensional (3D) graphene network were synthesized through a facile method. In the preparation process, Fe(OH)3 colloid was formed in situ by adding FeCl3 solution to a boiling graphene oxide (GO) suspension, with Fe(OH)3/GO precipitated because of the electrostatic interaction between the two components. The precipitate was separated and added to a second GO suspension to achieve additional GO encapsulation. This self-assembled Fe(OH)3/GO precursor was then hydrothermally and heat treated, resulting in the formation of Fe3O4/graphene composites. X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and Raman spectroscopy results revealed that the Fe3O4/graphene composites possess a favorable 3D porous graphene network embedding 50- to 100-nm-sized Fe3O4 nanoparticles. The Fe3O4/graphene composites exhibit good electrochemical performance as an anode material for Li-ion batteries. The electrode composed of the Fe3O4/graphene composite delivered a capacity of 1390 mAh∙g - 1 for the first lithiation and retained a capacity of 819 mAh∙g - 1 after 50 cycles. The electrodes also exhibited good rate capability. The present results demonstrate that the electrochemical performance of the Fe3O4/graphene composite is highly sensitive to its preparation procedure and to the resulting nanostructure. Each of the four preparation procedures was experimentally shown to be important for achieving the final nanostructure and good electrochemical performance. A formation mechanism for the Fe3O4/graphene composite is also proposed.

Preparation and characterization of LiFePO<sub>4</sub>/graphene-oxide composites

Preparation and Characterization of LiFePO4/graphene-oxide Composites

Nanostructure Optimization of LiFePO4/carbon Aerogel Composites for Performance Enhancement

Fe 3 O 4 /graphene Composites with a Porous 3D Network Structure Synthesized Through Self-Assembly under Electrostatic Interactions As Anode Materials of High-Performance Li-Ion Batteries

Research based on graphene oxide composite with LiFe0.97Ni0.03PO4

Preparation and Electrochemical Properties of (fe2.5ti0.5)1.04o4–graphene Nanocomposite

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Synthesis of graphene-supported LiFePO4/C materials via solid-state method using LiFePO4(OH) as precursors

Preparation and Electrochemical Performance of LiFePO_4/C Using Fe_2O_3 As Raw Material

Research on Preparation and Morphology of GO and GO/Fe3O4 Composite

Preparation and properties of LiFePO4/C composite materials with Fe2O3 as starting reactant

Preparation of Ni-doped LiFePO4/graphene Composite Via Two-Step Method

Inorganic-based Sol–gel Synthesis of Nano-Structured LiFePO 4 /C Composite Materials for Lithium Ion Batteries

Electrochemical Performance Comparison of LiFePO4 Supported by Various Carbon Materials

SYNTHESIS AND CHARACTERIZATION OF <font>LiFePO</font><sub>4</sub>/<font>C</font> PREPARED VIA A SOL–GEL METHOD

Preparation and Characterization of LiFePO4 Made from NH4FePO4·H2O

Effect of the Structure of Pyrolytic Carbon on the Performance of LiFePO4/C Composite Cathode Material

Synthesis and Characterization of Lifepo4/C Prepared Via A Sol-Gel Method

Preparation and Characterization of Nano LiFePO<sub>4</sub>/C for Lithium-Ion Batteries

Structure and Magnetic Properties of AO and LiFePO4/C Composites by Sol-Gel Combustion Method