Abstract:The Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers were prepared using sol-gel process combined with electrospinning. The thermal decomposition and phase inversion process of precursor nanofibers and the effects of calcination temperature and SiO2 content on the phase composition, microstructure, morphology and magnetic property of the resulting nanofibers were studied by means of thermogravimetric and differential thermal analysis, X-ray diffraction, field emission scanning electron microscopy, high resolution transmission electron microscopy and vibrating sample magnetometer. The experimental results show that the cubic spinel structure is basically formed when the precursor nanofibers are calcined at 450 ℃ for 2 h. The average grain size of Ni0.5Zn0.5Fe2O4 contained in the composite nanofibers with 10 % SiO2 and their specific saturation magnetization and coercivity increase with increasing calcination temperature. Amorphous SiO2 additive can effectively restrain the growth of Ni0.5Zn0.5Fe2O4 nanocrystals. As a result, with SiO2 content increasing from 0 to 20 % , the average grain size of Ni0.5Zn0.5Fe2O4 in the prepared Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers calcined at 900 ℃ for 2 h decreases from 81.6 to 13.3 nm, and the specific saturation magnetization of these samples monotonically decreases, whereas the coercivity initially increases and then decreases due to the change of magnetic domain structure from multi-domain to single-domain along with the reduction in grain size. In addition, with the increase of SiO2 content, the diameter of the as-prepared Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers gradually increases and the surface becomes smooth.

PREPARATION OF MAGNETIC COMPOSITE OF <font>NiFe</font><sub>2</sub><font>O</font><sub>4</sub><font>@SiO</font><sub>2</sub> AND THE ASSEMBLY OF THE COLLOID PARTICLES BY MAGNETIC FIELDS

Preparation and Characterization of Nano-magnetic Fe3O4-SiO2 Composite

Preparation and Surface Modification of Fe<sub>3</sub>O<sub>4 &Lt;/sub>nano-Magnetic Powders

Polyol Synthesis of Superparamagnetic Fe_3O_4 Nanoparticles for Magnetic Resonance Imaging

Preparation of Porous SiO2/Ni/TiO2 Multicoated Microspheres Responsive to Electric and Magnetic Fields

In Situ Dispersion of Non-Aqueous Fe3O4 Nanocolloids by Microdroplet Coalescence and Their Use in the Preparation of Magnetic Composite Particles.

Preparation and characterization of γ-Fe_2O_3/SiO_2 magnetic nanocomposites

Synthesis and characterization of core-shell structure silica-coated Fe29.5Ni70.5 nanoparticles

Preparation of One-Dimensional Ni0.5 Zn0.5 Fe2O4/SiO2 Composite Nanostructures and Their Magnetic Properties

Preparation of High Magnetic Fe_3O_4/TiO_2 Composite Particles

Preparation of Monodispersed Hybrid Nanospheres with High Magnetite Content from Uniform Fe3O4 Clusters

Preparation and performance studies of Fe3O4@SiO2 silicon oil based magnetic fluid

Size-controlled synthesis of Fe3O4 and Fe3O4@SiO2 nanoparticles and their superparamagnetic properties tailoring

Preparation of the Percolative Nickel-Zinc Ferrite/Barium Titanate Composite Ceramics with Liquid-Solid Hybrid Method

Magnetic Colloidosomes Fabricated By Fe3o4-Sio2 Hetero-Nanorods

Preparation and Surface Modification of Monodisperse Fe3O4 Nanoparticles

Facile Preparation of Superparamagnetic Fe3O4/poly(St-co-MPS)/SiO2 Composite Particles with High Magnetization by Introduction of Silanol Groups.

Synthesis of Monodisperse Fe@SiO2 Core-Shell Nanocapsules and Investigation of Their Magnetic Behaviour

Synthesis of Fe<sub>3</sub>O<sub>4</sub> Magnetic Nanoparticles in a Helical Microreactor

Preparation and characterization of SiO_2 encapsulated Ni nanoparticles

Preparation and Characterization of High Stability Silicone-Based Colloidal Magnetic Fluids