Abstract:Utilising cooling stimulation as a thermal excitation means has demonstrated profound capabilities of detecting sub-surface metal loss using thermography. Previously, a prototype mechanism was introduced which accommodates a thermal camera and cooling source and operates in a reciprocating motion scanning the test piece while cold stimulation is in operation. Immediately after that, the camera registers the thermal evolution. However, thermal reflections, non-uniform stimulation and lateral heat diffusions will remain as undesirable phenomena preventing the effective observation of sub-surface defects. This becomes more challenging when there is no prior knowledge of the non-defective area in order to effectively distinguish between defective and non-defective areas. In this work, the previously automated acquisition and processing pipeline is re-designed and optimised for two purposes: 1-Through the previous work, the mentioned pipeline was used to analyse a specific area of the test piece surface in order to reconstruct the reference area and identify defects. In order to expand the application of this device over the entire test area, regardless of its extension, the pipeline is improved in which the final surface image is reconstructed by taking into account multiple segments of the test surface. The previously introduced pre-processing method of Dynamic Reference Reconstruction (DRR) is enhanced by using a more rigorous thresholding procedure. Principal Component Analysis (PCA) is then used in order for feature (DRR images) reduction. 2-The results of PCA on multiple segment images of the test surface revealed different ranges of intensities across each segment image. This potentially could cause mistaken interpretation of the defective and non-defective areas. An automated segmentation method based on Gaussian Mixture Model (GMM) is used to assist the expert user in more effective detection of the defective areas when the non-defective areas are uniformly characterised as background. The final results of GMM have shown not only the capability of accurately detecting subsurface metal loss as low as 37.5% but also the successful detection of defects that were either unidentifiable or invisible in either the original thermal images or their PCA transformed results.

An Infrared Thermal Image Defect Detection Method Based on Phase Features*.

Infrared Image Defect Diagnosis Through LAB Space Transformation

RECONSTRUCTION OF PHASED ARRAY ULTRASONIC TESTING IMAGE OF THROUGH HOLE BASED ON FINITE ELEMENT ANALYSIS

Thermography Sequence Processing and Defect Edge Identification of TBC Structure Debonding Defects Detection Using Long-Pulsed Infrared Wave Non-Destructive Testing Technology

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Two-dimensional Hilbert-Huang transform-based thermographic data processing for non-destructive material defect detection

Automatic Extraction of Material Defect Size by Infrared Image Sequence

Experimental study on infrared phase-locked thermal imaging inspection of carbon fiber reinforced polymer laminates

Enhanced Diffusion-Based Analysis for Fast Defect Detection in ECPT Image

Image Processing in Pulse Heating Infrared Nondestructive Test

Two-stream Convolutional Neural Network for Non-Destructive Subsurface Defect Detection Via Similarity Comparison of Lock-in Thermography Signals

Study on Equal Interval Sampling Method Promoting Efficiency of Post-Processing Algorithms for Infrared Thermography Inspecting Carbon-Fiber Reinforced Plastics Composites

Research on crack visualization method for dynamic detection of eddy current thermography

Super-Resolution Thermal Imaging Using Uncooled Infrared Sensors for Non-Destructive Testing of Adhesively Bonded Joints

Visual Defect Recognition and Location for Pulsed Thermography Images Based on Defect-background Contrast Analysis

Multi-frequency Fused Lock-in Thermography in Detecting Defects at Different Depths

A novel image enhancement algorithm based on stationary wavelet transform for infrared thermography to the de-bonding defect in solid rocket motors

A Method for Quality Inspection of Continuous Casting Billet Based on Infrared Flaw Detection and Two-Dimensional Image

Inversion Method for Defects in Depth Evaluation and Thermal Wave Imaging

Continuous laser-line scanning thermography with data-processing algorithm for rapid and accurate defect inspection

An Automated Pipeline for Dynamic Detection of Sub-Surface Metal Loss Defects across Cold Thermography Images