Abstract:Porous metallic structures play a critical role in mass and heat transfer processes due to their high surface areas, fixed porosity, and high stiffness – so understanding their fluid flow behaviour is crucial in designing materials that perform efficiently in mass and heat transfer. In view of this, a multi-disciplinary approach is employed to study the hydrodynamics of aluminium foams produced by a liquid melt infiltration technique using experimental, computational fluid dynamics (CFD) modelling and simulation, as well as artificial neural network (ANN) machine learning backpropagation. X-ray computed tomography datasets were used to characterize pore-structure-related properties of replicated materials, followed by three-dimensional advanced imaging of workable representative volume elements. Hydraulic flow information was acquired for the porous matrices using the constant-head permeameter technique. Experiments showed the permeability and Forchheimer coefficient dependence on pore-structure-related properties for fluid-flowing within the pre-Forchheimer and fully developed Forchheimer regimes. Flow permeability of 8.479 × 10 −09 m 2 was highest in the material with the widest mean pore openings (0.212 mm) and lowest (1.291 × 10 −09 m 2 ) in the material with the narrowest mean pore openings (0.106 mm). Conversely, Forchheimer coefficients were higher for materials with lower porosities and lower for materials with higher porosities. CFD calculations accurately predicted the fluid properties of metallic foams, as well as the influence of intrinsic foam properties on permeability and the Forchheimer coefficient. The ANN model framework was also able to provide valuable information about the hydrodynamics of these materials. Convolution and non-linearity of the ANN model were improved by adding supplementary neurons to the hidden layers allowing deviations within 0.3 and 9.0 percent to be attained.

Fluid Conductivity of Porous Aluminum Fabricated by Powder-Metallurgical Spacer Method

Fabrication of porous aluminum composites containing hollow ceramics

Fabrication of Nanocrystalline Zro2 Particle Reinforced Aluminum Alloy Composite by Squeeze Casting Route

Theoretical and Experimental Investigation of Flow Rate Characteristics of Sintered Metal Porous Media

Study of fabricating technology of a porous aluminum alloy

Enhancing Capillary Pressure of Porous Aluminum Wicks by Controlling Bi-Porous Structure Using Different-Sized NaCl Space Holders

FABRICATING POROUS ALUMINIUM WITH DIRECTIONAL SOLIDIFICATION OF Al-H SYSTEM

Preparation, Characterization and Designing of Porous Ti–6Al–4V Through Metal Injection Molding Without Space Holder

Fabrication and Characterization of Porous Copper with Ultrahigh Porosity

On the Hydrodynamics of Macroporous Structures: Experimental, CFD and Artificial Neural Network Analysis

Effect of Copper Content on the Microstructure and Properties of the Sintered Porous Aluminum Wick

Preliminary development of porous aluminum via powder metallurgy technique

Experimental investigation of permeability and Darcy-Forchheimer flow transition in metal foam with high pore density

Image-based finite element modeling of air flow and thermal transport in Al-fiber-sintered porous materials

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

Effect of Space Holder Size on the Porous High Purity Aluminum Property

Fabrication of High-Porosity Lotus-Type Porous Aluminum in Vacuum

Investigation of Transport Property of Fibrous Media: 3D Virtual Modeling and Permeability Calculation

Investigation on the Structural and Mechanical Properties of Al Foam Manufactured by Spark Plasma Sintering and Compression Molding Methods

Fabrication of carbon fiber reinforced aluminum matrix composites by inorganic binders

Uncovering the effects of local pressure and cooling rates on porosity formation in AA2060 Al-Li Alloy