Abstract:Solid oxide fuel cells (SOFCs) have been attracting people's attention for their high energy conversion efficiency, good fuel compatibility, no precious metal catalysts, and pollution-free emissions. However, the high operating temperature (800-1200℃) of the traditional SOFC can reduce the long-term stability and cause the difficulties in either the selecting of material or the sealing of SOFC. Therefore, great efforts have been devoted to developing the intermediate temperature SOFC (IT-SOFC), which works at 600-800℃. In the IT-SOFC, the ionic conductivity of doped CeO2-based electrolyte has a significant advantage relative to that of the conventional yttria-stabilized zirconia (YSZ) electrolyte. For example, at 600℃, the ionic conductivity of Sm-doped CeO2 is 0.02 S/cm much higher than that of the traditional YSZ electrolyte (only 0.0032 S/cm). Therefore, the doped CeO2-based electrolyte is a very promising electrolyte for IT-SOFC.Recently, the co-doping of two different elements into CeO2 has become a hot research topic. The ionic conductivity of Sm3+ and Sr2+ co-doped CeO2 has proved to be nearly twice as high as that of Sm3+ doped CeO2 (SDC). However, the mechanism for the co-doping effect on the conductivity of CeO2 is not clear. In this paper, Sm3+ and Sr2+ co-doped CeO2 is systematically studied using the DFT+U method. The microscopic properties of the Sm3+ and Sr2+ co-doped CeO2 including electronic density of states, band structure, oxygen vacancy formation energy and oxygen vacancy migration energy and so on have been calculated and analyzed by comparing with those of the Sm3+ or Sr2+ single doped CeO2. The calculation results indicate that Sm3+ and Sr2+ co-doping has a synergistic effect on the performance improvement of CeO2-based electrolyte, which can not only suppress the electronic conductivity of doped CeO2 system, but also can reduce the oxygen vacancy formation energy on the basis of single doped CeO2. The existence of Sm3+ can help to reduce the trapping effect of Sr2+ on oxygen vacancies, meanwhile the addition of Sr2+ can further reduce the minimum oxygen vacancy migration energy on the basis of SDC. Calculations by the climbing image nudged elastic band (CINEB) method indicate that the oxygen vacancy migration energy of the co-doped system can reach as low as 0.314/0.295 eV, which is lower than the minimum oxygen vacancy migration energy of SDC. Our research reveals the synergistic mechanism for Sm3+ and Sr2+ co-doping effect on the conductivity of CeO2, which is of great instructive significance for the further research and development of other high-performance co-doped electrolyte materials in IT-SOFC.

Investigation of Sr doping effect on oxygen ion de-localization in Gd2Ti2O7 pyrochlore system and its influence on charge relaxation dynamics and ionic conductivity: as electrolyte for IT-SOFCs

Synergistic electron doping and ion conductive phase incorporating of SrCoO3- as desirable cathode materials for intermediate-temperature solid oxide fuel cells

Structural and electrical studies of Nd and Gd co-doped zirconia electrolytes for IT-SOFC applications

Structure, electrical and thermal properties of (Ba 0.5Sr 0.5) 1 - XGd xCo 0.8Fe 0.2O 3-δ perovskite as a solid-oxide fuel cell cathode

Synthesis and properties of Y-doped SrTiO3 as an anode material for SOFCs

Investigation of structural, electrical and electrochemical properties of La0.8Sr0.2Mn1−xScxO3−δ as cathode on yttria-stabilized zirconia electrolyte for intermediate temperature solid oxide fuel cell fabricated by one step dry pressing method

Synthesis and Electrical Properties of Co-doped Y0.08Sr0.92TiO3 − Δ As a Potential SOFC Anode

Modulating the Energy Band Structure of the Mg-Doped Sr0.5Pr0.5Fe0.2Mg0.2Ti0.6O3-δ Electrolyte with Boosted Ionic Conductivity and Electrochemical Performance for Solid Oxide Fuel Cells

Optimizing Strontium Titanate Anode in Solid Oxide Fuel Cells by Ytterbium Doping

Novel SrTixCo1−xO3−δ Cathodes for Low-Temperature Solid Oxide Fuel Cells

Preparation and Electrochemical Properties of Strontium Doped Pr2NiO4 Cathode Materials for Intermediate-Temperature Solid Oxide Fuel Cells

Oxygen–Ion Conductivity, Dielectric Properties and Spectroscopic Characterization of “Stuffed” Tm2(Ti2−xTmx)O7−x/2 (x = 0, 0.1, 0.18, 0.28, 0.74) Pyrochlores

High-performing and stable semiconductor yttrium-doped gadolinium electrolyte for low-temperature solid oxide fuel cells

CO2-tolerant Sr2CoTaO6-δ double perovskite oxide as a novel cathode for intermediate-temperature solid oxide fuel cell

Evaluation of (ba0.5sr0.5)0.85gd0.15co0.8fe0.2o3− Cathode for Intermediate Temperature Solid Oxide Fuel Cell

Performances of Gd0.8Sr0.2CoO3 Powders for IT-SOFC Cathodes Prepared by Glycine-Nitrate Process

Gadolinium-doped SrFeO 3 As a Highly Active and Stable Electrode for Symmetrical Solid Oxide Fuel Cells

A Study of Prga1-Xmgxo3 As the Electrolytes of Sofcs

Fabrication and performance analysis of A-site metal-promoted La0.595V0.005Sr0.4CoO3−∂ perovskite oxides as cathodes for intermediate temperature solid oxide fuel cells

Preparation and characterization of Gd1-xSrxCoO 3-δ and Gd0.8Sr0.2Co1-yFe yO3-δ

DFT+U Calculation of Sm3+ and Sr2+ Co-Doping Effect on Performance of CeO2-based Electrolyte