Abstract:Aerial manipulator (AM) systems are significantly more effective than both conventional manipulators and flying robots, especially in disaster rescue settings, because they can perform human-like interaction tasks in flight. However, controlling the contact force of an AM is difficult due to the coupling between its flying platform and manipulator. This paper proposes a contact force control framework to address this problem. First, the UAV/AM position response under an external force is studied, and it is theoretically shown that a closed-loop UAV/AM behaves as a spring-mass-damper system. Second, a contact force controller is designed using an inverse-dynamics method. Third, an attitude feed-forward approach is employed to improve the force tracking performance. Then, the real-time contact position is introduced into the control system to achieve interaction with an actively moving environment. Finally, an innovative AM is developed and subjected to flight experiments, validating the proposed framework. An AM’s characteristics in interaction operations are summarized, and general conclusions are drawn. This study is novel in that 1) the contact force control is implemented without relying on force sensors, 2) the whole framework is applicable for controlling a constant/variable contact force with high closed-loop performance, and 3) it can also perform reliable interaction with a dynamic and unknown environment. Note to Practitioners—This study is motivated by the contact force control problem of an aerial manipulator (AM) during interaction operations. Previous approaches have explored the feasibility of controlling contact forces to some extent, but they lack universality and assume a static environment. Ensuring sufficient safety and providing reliable solutions in real-world applications remain challenging. This paper aims to investigate the position response of a closed-loop aircraft system under external forces, without disrupting its existing steady flight. The proposed method transforms contact force control into position control, eliminating the need for a force sensor. A series of aerial experiments were conducted to validate the effectiveness and applicability of the method in various scenarios. Our ongoing work will focus on migrating such an AM system from a laboratory scenario to the real world.

Active Modeling Based Control for Aerial Manipulator Systems

Robust Control of An Aerial Manipulator Based on A Variable Inertia Parameters Model

Collaborative Simulation and Integrated CMAC and PID Optimization and Control of an Aerial Work Platform

Modelling and control of an aerial manipulator consisting of an autonomous helicopter equipped with a multi-link robotic arm

Redundancy-Driven Multi-Task Adaptive Backstepping Tracking Control for Aerial Manipulators

Modeling and Control of an Omnidirectional Micro Aerial Vehicle Equipped with a Soft Robotic Arm

A novel aerial manipulator system compensation control based on ADRC and backstepping

Adaptive Extremum Seeking Controller Via Nonlinear Variable Gain for Uncertainty Model Multirotor

Physical Interaction Oriented Aerial Manipulators: Contact Force Control and Implementation

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Aerial Mobile Manipulator System to Enable Dexterous Manipulations with Increased Precision

Modeling and Control of MM-UAV: Mobile Manipulating Unmanned Aerial Vehicle

Robust Observer-based Trajectory Tracking Control for Unmanned Aerial Manipulator

Adaptive Neural Network Backstepping Control Method for Aerial Manipulator Based on Variable Inertia Parameter Modeling

Cable-Driven Unmanned Aerial Manipulator Systems for Water Sampling: Design, Modeling, and Control

Estimation and Control of Cooperative Aerial Manipulators for a Payload with an Arbitrary Center-of-Mass

Geometric-based prescribed performance control for unmanned aerial manipulator system under model uncertainties and external disturbances

Design, Modeling and Dynamic Compensation PID Control of a Fully-Actuated Aerial Manipulation System

Multitask control of aerial manipulator robots with dynamic compensation based on numerical methods

Dynamic Image-Based Impedance Control of Aerial Manipulator for Sliding Inspection

Dynamic Modeling and Controller Design of a Novel Aerial Grasping Robot