Abstract:Semiconductor photodetectors can work only in specific material-dependent light wavelength ranges, connected with the bandgaps and absorption capabilities of the utilized semiconductors. This limitation has driven the development of hybrid devices that exceed the capabilities of individual materials. In this study, for the first time, a hybrid heterojunction photodetector based on methylammonium lead bromide (MAPbBr3) polycrystalline film deposited on gallium arsenide (GaAs) was presented, along with comprehensive morphological, structural, optical, and photoelectrical investigations. The MAPbBr3/GaAs heterojunction photodetector exhibited wide spectral responsivity, from 540 to 900 nm. The fabrication steps of the prototype device, including a new preparation recipe for the MAPbBr3 solution and spinning, will be disclosed and discussed. It will be shown that extending the soaking time and refining the precursor solution's stoichiometry may enhance surface coverage, adhesion to the GaAs, and film uniformity, as well as provide a new way to integrate MAPbBr3 on GaAs. Compared to the pristine MAPbBr3, the enhanced structural purity of the perovskite on GaAs was confirmed by X-ray Diffraction (XRD) upon optimization compared to the conventional glass substrate. Scanning Electron Microscopy (SEM) revealed the formation of microcube-like structures on the top of an otherwise continuous MAPbBr3 polycrystalline film, with increased grain size and reduced grain boundary effects pointed by Energy-Dispersive Spectroscopy (EDS) and cathodoluminescence (CL). Enhanced absorption was demonstrated in the visible range and broadened photoluminescence (PL) emission at room temperature, with traces of reduction in the orthorhombic tilting revealed by temperature-dependent PL. A reduced average carrier lifetime was reduced to 13.8 ns, revealed by time-resolved PL (TRPL). The dark current was typically around 8.8 × 10-8 A. Broad photoresponsivity between 540 and 875 nm reached a maximum of 3 mA/W and 16 mA/W, corresponding to a detectivity of 6 × 1010 and 1 × 1011 Jones at -1 V and 50 V, respectively. In case of on/off measurements, the rise and fall times were 0.40 s and 0.61 s or 0.62 s and 0.89 s for illumination, with 500 nm or 875 nm photons, respectively. A long-term stability test at room temperature in air confirmed the optical and structural stability of the proposed hybrid structure. This work provides insights into the physical mechanisms of new hybrid junctions for high-performance photodetectors.

MAPbI<sub>3</sub> Photodetectors with 4.7 MHz Bandwidth and Their Application in Organic Optocouplers

High‐Performance MAPbI3/PM6:Y6 Perovskite/Organic Hybrid Photodetectors with a Broadband Response

High-Detectivity and Stable Planar MAPbI₃/IDT-BT Photodetectors with Assisted MoO₃ Interlayer

Large-Area Periodic Organic-Inorganic Hybrid Perovskite Nanopyramid Arrays for High-Performance Photodetector and Image Sensor Applications

Design and Construction of an Optical Communication System: Utilizing High‐Performance Organic–Inorganic Hybrid Perovskite‐Based Photodetectors

High-Detectivity and Stable Planar MAPbI3/IDT-BT Photodetectors With Assisted MoO3 Interlayer

High-Performance Planar-Type Photodetector on (100) Facet of MAPbI 3 Single Crystal

High-Performance Planar-Type Photodetector on (100) Facet of MAPbI3 Single Crystal

Solution-processed MAPbI 3 /Cs 2 AgBiBr 6 heterostructure through epitaxial growth for broadband photo-detection

High-Performance Waveguide-Integrated Bi2O2Se Photodetector for Si Photonic Integrated Circuits.

High-Performance Broadband Photodetectors Combining Perovskite and Organic Bulk Heterojunction Bifunctional Layers

Physical Properties of an Efficient MAPbBr3/GaAs Hybrid Heterostructure for Visible/Near-Infrared Detectors

A Design Strategy for Low‐Cost Single/Dual‐Band Photodetector: Bulk Heterojunction and Interface Engineering

Solution-processed Flexible MAPbI3 Photodetectors with ZnO Schottky Contacts.

High-Performance Planar Self-Driven Visible and Near-Infrared Photodetector Based on Pb-Sn Perovskite Single Crystals

High performance organic-inorganic perovskite-optocoupler based on low-voltage and fast response perovskite compound photodetector

High performance photodetectors based on solution-processed epitaxial grown hybrid halide perovskites.

Perovskite Photodetectors Based on p-i-n Junction With Epitaxial Electron-Blocking Layers

BEHAVIORS OF PHOTOCONDUCTIVE DETECTORS BASED ON MAPbI(3) PEROVSKITE FILMS

Enhanced On–Off Ratio for Ni(OH) 2 ·0.75H 2 O-MAPbBr 3 -Based Photodetectors

Enabling a High-Sensitivity and Fast-Response Organic Phototransistor Based on an “embedded” Heterojunction Toward Broadband High-Speed Imaging