Abstract:Selective laser melting (SLM) process produces high-performance metal parts using a layer-by-layer technique involving various influential factors. Nevertheless, there is a research gap in predictive models for the performance of SLM-processed 316L stainless steel, specifically concerning the effect of process parameters and their interactions. To address this, a systematic approach based on Taguchi design and analysis of variance (ANOVA) was used to optimize the SLM processing of 316L stainless steel. An experimental plan was set up using an L9 orthogonal array, with laser power, hatch spacing, and scan speed as input variables, each with three levels. Optical microscopy was used to analyze microstructure and porosity, while response variables, including relative density, surface roughness, hardness, and tensile properties, were measured. Regression models and response surface method (RSM) contour plots modeling the relationship between the input factors and the response variables were also presented. The main aim of this study is to provide valuable design tools for predicting and optimizing the performance of 316L SS processed by SLM. Results showed high densification levels (up to 99.97%) and excellent mechanical properties, surpassing conventionally processed 316L SS. The sample produced at P = 170W, h = 0.08 mm, and v = 1000 mm/s exhibited the highest tensile properties with a yield strength of 421 MPa, hardness of 245 HV, and elongation at failure of 42%. For the variation range, ANOVA results showed that hatch spacing was the most significant parameter influencing relative density and mechanical properties. The scan speed and hatch spacing increase negatively impacted all properties due to low densification. Moreover, increased laser power can melt the powder, resulting in less porosity. As a result, surface finish and ductility are improved. Overall, the findings of this paper contribute to the fabrication of stainless steel 316L using SLM with optimized parameters.

Process Optimization of Selective Laser Melting 316L Stainless Steel by a Data-Driven Nonlinear System

Investigation into the effect of process parameters on density, surface roughness, and mechanical properties of 316L stainless steel fabricated by selective laser melting

Numerical Modelling and Experimental Validation of Selective Laser Melting Processes Using a Custom Argon Chamber Setup for 316L Stainless Steel and Ti6AI4V

Optimization of Selective Laser Melting Forming Technology for 316 Stainless Steel

Optimization of Selective Laser Melting (SLM) Additive Manufacturing Process Parameters of 316L Austenitic Stainless Steel

A Comparative Study of Machine Learning Methods for Computational Modeling of the Selective Laser Melting Additive Manufacturing Process

Multi-Objective Optimization of Selective Laser Melting Processes for Minimizing Energy Consumption and Maximizing Product Tensile Strength

A comprehensive investigation on application of machine learning for optimization of process parameters of laser powder bed fusion-processed 316L stainless steel

Machine learning-based optimization of process parameters in selective laser melting for biomedical applications

Simulation and experimental studies on process parameters, microstructure and mechanical properties of selective laser melting of stainless steel 316L

Modeling and simulation of metal selective laser melting process: a critical review

Enhancing SLM Stainless Steel: Model-Based Parameter Optimization

Simulation and prediction of the temperature field of copper alloys fabricated by selective laser melting

Process parameter optimization and mechanical properties for selective laser melting of AlSi10Mg alloy

Modelling and Numerical Simulation During Selective Laser Melting of Stainless Steel 316L Via Particle by Particle Approach

Simultaneous consideration of relative density, energy consumption, and build time for selective laser melting of Inconel 718: A multi-objective optimization study on process parameter selection

Prediction of the Melt Pool Size in Single-Layer Single-Channel Selective Laser Melting Based on Neural Network

Numerical Simulation of Selective Laser Melting of 304 L Stainless Steel

Influence of different Processing Parameter on distortion and Residual Stress of Inconel 718 Alloys Fabricated by Selective Laser Melting (SLM)