Abstract:Rod fastening rotor (RFR), as a typical rotor structure of gas turbine which is different from the integral rotor, is comprised of a set of discs clamped together by a central tie rod or several tie rods on the pitch circle diameters. In process of machining, tolerances of the disc are inevitable, of which the parallelism error and mass imbalance are focused on in this paper. Firstly, the complex bending of RFR by accumulation of parallelism errors of discs is derived through the coordinate transmission. Then the static analysis of RFR is performed to obtain the additional pressure by the effect of unbalanced forces, which is related to the assembly angles and rotating speed, on contact surfaces using a linear hypothesis, based on which the distribution of contact pressure considering the original pre-tightening force is obtained. Then the Bifractal-Regular theory is adopted to acquire the micro-topography of the contact interface and derive the contact stiffness related to normal contact pressure, fractal upper length limit and regular shape of the contact interfaces. After that, the zero thickness element is introduced to obtain the equivalent stiffness matrices of the contact surface. In addition, the circumferential uniformly distributed rods are modeled as a spring element which provides additional bending stiffness for the RFR. Based on the analysis above, the dynamic model of the RFR-bearing system containing 10 discs is established using the Timoshenko beam element where the continuous part of the shaft is modeled by Timoshenko beam element considering shear effect. Finally, the multi -optimization is carried out on the vibration response by the coupled effects of both initial bending and mass imbalance of the RFR-bearing system through which the optimal assembly angles are obtained. The results show a good performance in decreasing vibration as well as bending of the RFR system.

Influences of Microstructure Parameters on the Throttling Coefficient and Rotational Stiffness of Aerostatic Guideway

Design of Microstructure Parameters on a Small Multi-Throttle Aerostatic Guideway in Photolithography

Improving the Rotational Stiffness of Compact Aerostatic Guideway by Micro-Structures Optimization.

Theoretical Research on Aerostatic Rectangular Guideways with Finite Difference Method

An adaptive modeling method for multi-throttle aerostatic thrust bearing

Investigation on the Influence of Structural Rigidity on the Stiffness of Aerostatic Guideway Considering Fluid-Structure Interaction

An Experimental Investigation of Groove Control for Reducing Drag in a Flat Turbulent Boundary Layer

Optimal design of high performance linear guideway based on orifice restriction

The Effect Of Structural Coefficient On Stiffness And Deformation Of Hydrostatic Guideway

Analysis of Thermal Deformation of Hydrostatic Guideway for Roller Mold Ul-tra-Precision Machine

A Steady Modeling Method to Study the Effect of Fluid–structure Interaction on the Thrust Stiffness of an Aerostatic Spindle

Fluid–structure interaction analysis of the influences of structural parameters on the dynamic properties of aerostatic journal bearing

Structure optimization of aerostatic thrust bearing based on air film pressure field characteristics analysis

The Effect of the Restrictor Structural Parameters on the Static Properties of the Aerostatic Guide Way by Finite Element Analysis

A fast calculation method for the optimal clearance and stiffness of the aerostatic guideway considering fluid-structure interaction

Analysis on the Individual Stiffness of the Aerostatic Guide Way and Error Sources of Its Vibration

Research on Motion Precision for a High Speed Adjustable Rotor Set

Dynamic Analysis And Optimization On Assembly Parameters Of Rod Fastening Rotor System With Manufacturing Tolerances

Design of Porous Restriction Aerostatic Guideway for Form Measuring Instrument

Research on the aerostatic rotary table for micro-gravity test based on micro-orifice throttling

Analysis of the Static Performance of a Cableless Aerostatic Guideway