Abstract:In this paper, a control method of a novel tilt-rotor UAV with a blended wing body layout is studied. The novel UAV is capable of vertical take-off and landing and has strong stealth capabilities that can be applied to carrier-borne reconnaissance aircraft. However, the high aspect ratio of blended wing body UAVs leads to a wingtip or oar-tip touchdown problem when adopting the conventional position-attitude control (CPAC) scheme with a large crosswind disturbance. Moreover, when the UAV is subject to interference during reconnaissance, aerial photography, and landing missions, the conventional scheme cannot provide both attitude stability and track accuracy. First, a direct thrust vectoring control (DTVC) scheme is proposed. The control authority of the rotor tilt mechanism was added to enable the decoupling of the attitude and trajectory and to improve the response rate and response bandwidth of the flight trajectory. Second, considering the problems of strong couplings and parameter uncertainties and the nonlinear features and mismatched perturbations that are inevitable in the tilt-rotor, we designed a robust UAV controller based on the backstepping sliding mode control method and determined the stability of the control system through the Lyapunov function. Finally, in the case of crosswire interference during vertical takeoff and landing and the aerial photography missions of the UAV, the numerical simulation of the CPAC scheme and the DTVC scheme was carried out, respectively, and the Monte Carlo random test method was introduced to conduct the statistical test of the landing accuracy. The simulation results show that the DTVC scheme improves the landing accuracy and speed compared to the CAPC scheme and decouples the position control loop from the attitude control loop, finally enabling the UAV to complete the flight control in the VTOL phase.

Dynamic modeling and control system design of tilt-rotor UAV

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

Tri-Tilting Rotor Fixed-Wing VTOL UAV: Dynamic Modelling and Transition Flight Control

A Nonlinear Robust Sliding Mode Controller with Auxiliary Dynamic System for the Hovering Flight of a Tilt Tri-Rotor UAV

Modeling and Control of an Omnidirectional Hexrotor UAV with Tilted-Rotors

Multiple Modeling and Fuzzy Switching Control of Fixed-Wing VTOL Tilt-Rotor UAV

System Design of a Novel Tilt-Roll Rotor Quadrotor UAV

Modeling and Design of an Aircraft-Mode Controller for a Fixed-Wing VTOL UAV

Thrust Vectoring Control of a Novel Tilt-Rotor UAV Based on Backstepping Sliding Model Method

Design and Control of a VTOL Aerial Vehicle Tilting its Rotors Only with Rotor Thrusts and a Passive Joint

Large-Sized Multirotor Design: Accurate Modeling with Aerodynamics and Optimization for Rotor Tilt Angle

Dynamic Modeling and Control for Tilt-Rotor UAV Based on 3D Flow Field Transient CFD

Motion Control for a Manned Evtol Aircraft with Cross Tilting Propellers

Control System Design and Flight Testing for a Miniature Unmanned Helicopter

Attitude Control of a Single Tilt Tri-Rotor UAV System: Dynamic Modeling and Each Channel's Nonlinear Controllers Design

Research on Vertical Take-off and Landing Control of New VTOL Aircraft Based on ADRC

Attitude- and Cruise Control of a VTOL Tiltwing UAV

Modeling and control of a class of urban air mobility tiltrotor aircraft

Dynamics modeling and nonlinear attitude controller design for a rocket-type unmanned aerial vehicle

Design and Hover Control of a Tilt Tri-rotor Flying-wing Aircraft

Nonlinear Control of a Single Tail Tilt Servomotor Tri-Rotor Ducted VTOL-UAV