Abstract:In this paper, a control method of a novel tilt-rotor UAV with a blended wing body layout is studied. The novel UAV is capable of vertical take-off and landing and has strong stealth capabilities that can be applied to carrier-borne reconnaissance aircraft. However, the high aspect ratio of blended wing body UAVs leads to a wingtip or oar-tip touchdown problem when adopting the conventional position-attitude control (CPAC) scheme with a large crosswind disturbance. Moreover, when the UAV is subject to interference during reconnaissance, aerial photography, and landing missions, the conventional scheme cannot provide both attitude stability and track accuracy. First, a direct thrust vectoring control (DTVC) scheme is proposed. The control authority of the rotor tilt mechanism was added to enable the decoupling of the attitude and trajectory and to improve the response rate and response bandwidth of the flight trajectory. Second, considering the problems of strong couplings and parameter uncertainties and the nonlinear features and mismatched perturbations that are inevitable in the tilt-rotor, we designed a robust UAV controller based on the backstepping sliding mode control method and determined the stability of the control system through the Lyapunov function. Finally, in the case of crosswire interference during vertical takeoff and landing and the aerial photography missions of the UAV, the numerical simulation of the CPAC scheme and the DTVC scheme was carried out, respectively, and the Monte Carlo random test method was introduced to conduct the statistical test of the landing accuracy. The simulation results show that the DTVC scheme improves the landing accuracy and speed compared to the CAPC scheme and decouples the position control loop from the attitude control loop, finally enabling the UAV to complete the flight control in the VTOL phase.

Research on Vertical Take-off and Landing Control of New VTOL Aircraft Based on ADRC

Thrust Vectoring Control of a Novel Tilt-Rotor UAV Based on Backstepping Sliding Model Method

Modeling and Design of an Aircraft-Mode Controller for a Fixed-Wing VTOL UAV

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

Tri-Tilting Rotor Fixed-Wing VTOL UAV: Dynamic Modelling and Transition Flight Control

Practical control implementation of tri-tiltRotor flying wing unmanned aerial vehicles based upon active disturbance rejection control

Nonlinear Control of a Single Tail Tilt Servomotor Tri-Rotor Ducted VTOL-UAV

A New VTOL Aircraft

Motion Control for a Manned Evtol Aircraft with Cross Tilting Propellers

Active Disturbance Rejection Control Of A Flying-Wing Tailsitter In Hover Flight

Modeling and control of a class of urban air mobility tiltrotor aircraft

A new control scheme for an aerodynamic-surface-free tilt-rotor convertible UAV

A Nonlinear Robust Sliding Mode Controller with Auxiliary Dynamic System for the Hovering Flight of a Tilt Tri-Rotor UAV

Large-Sized Multirotor Design: Accurate Modeling with Aerodynamics and Optimization for Rotor Tilt Angle

Active Disturbance Rejection Control of a Hovering PVTOL Aircraft

Dynamics modeling and nonlinear attitude controller design for a rocket-type unmanned aerial vehicle

Design and Hover Control of a Tilt Tri-rotor Flying-wing Aircraft

Linear parameter-varying-based transition flight control design for a tilt-rotor aircraft

Development of Model Predictive Controller for a Tail-Sitter VTOL UAV in Hover Flight

Dynamic Modeling and Control for Tilt-Rotor UAV Based on 3D Flow Field Transient CFD

Multiple Modeling and Fuzzy Switching Control of Fixed-Wing VTOL Tilt-Rotor UAV