Abstract:A fault occurring in power networks normally results in a large short-circuit current flow in the system, which may exceed the rating of existing circuit breakers and can damage system equipments. Because of difficulty in power network reinforcement and the interconnection of more distributed generations, fault current level has become a serious problem in transmission and distribution system operations. The utilisation of fault current limiters (FCLs) in power systems could provide an effective way to suppress fault currents. In a loop transmission or distribution system, the advantages would greatly depend on the number and locations of FCL installations. The authors propose a method to determine the optimum number and locations for FCL placement in terms of installing smallest FCLs circuit parameters to restrain short-circuit currents under circuit breakers' interrupting ratings. In the proposed approach, the sensitivity factor, defined as the reduction of bus fault currents because of a given variation in the branch parameter, is derived and used to choose better candidates for active FCL installations. The search space for FCL installations can be reduced by using the proposed sensitivity factor calculation; therefore the computational efficiency and accuracy can be improved. A genetic-algorithm-based method is then designed to include the sensitivity information in searching for the best locations and parameters of FCLs. The test results demonstrate the efficiency and accuracy of the proposed method.

Placement Optimization of Multi-Type Fault Current Limiters Based on Genetic Algorithm

Multi-objective Current Limiters Configuration Based on Parallel Fast and Elitist Non-dominated Sorting Genetic Algorithm-Ⅱ

Optimization of Fault Current Limiter Configuration Based on Improved Niche Genetic Algorithm

Optimization Of Current Breaker And Fault Current Limiter In Dc Micro-Grid Based On Faulty Transient Analysis

Multi-objective Optimal Configuration of Current Limiting Strategies

Optimum Fault Current Limiter Placement

Optimum Fault Current Limiter Placement with Search Space Reduction Technique

Global optimization algorithm for fault current limiter configuration based on rearranged particle swarm optimization

Parameters Selection Method Of Circuit Breaker And Fault Current Limiter In Mesh-Type Dc Microgrid

Risk‐based Many‐objective Configuration of Power System Fault Current Limiters Utilising NSGA‐III

A Novel Six-Leg Three-Phase Fault Current Limiter

Parameter design and optimization of unified power flow controller with fault current limiting

Design and Research of a Novel Unified Power Flow Controller with Fault Current Limiter

Parameter Optimization for Current Limiting Reactor and Fault Current Limiter in MMC-HVDC

Parameter Optimization Design Method for a Fast-Switch-based Fault Current Limiter and Circuit Breaker

Pareto Optimal Allocation of Resistive‐type Fault Current Limiters in Active Distribution Networks with Inverter‐interfaced and Synchronous Distributed Generators

Optimal allocation superconducting fault current limiters using multi-objective estimation of distribution algorithm based on bacterial foraging

Hybrid Multifunctional Saturated-core Fault Current Limiter

Optimal Allocation and Sizing of Fault Current Limiters Considering Transmission Switching With an Explicit Short Circuit Current Formulation

Reliable spatial configuration strategy of fault current limiters in multi-terminal HVDC system

Optimal Placement and Sizing of Fault Current Limiters: A Voltage- Stability-Constrained Approach Considering Transmission Switching