Abstract:Hypothetical Core Disruptive Accidents (HCDA) are dominantly concerned during safety assessment and evaluation in Sodium-cooled Fast Reactor (SFR). With molten core materials discharged into liquid sodium, positive reactivity is potentially introduced due to sodium boiling and molten core compaction, which can cause terrible recriticality. The possibility of recriticality and efficient cooling on the relocated debris bed are significantly affected by the fragmentation behavior of molten core in liquid sodium. With few available mechanism models and benchmarks, many investigations have been conducted on the fragmentation characteristics during molten fuel-coolant interaction (MFCI). In the present study, molten copper is used for molten simulant to be discharged into the liquid sodium pool through guiding tube based on a multifunctional experimental facility (COSA). The simulants are heated by electromagnetic induction system in customized ceramic crucible and the molten materials are controlled by magnetic lifting system to be drained through the guiding tube into the bottom liquid sodium pool. Temperature variation and pressure change in the liquid sodium pool are acquired against the energy release during MFCI. Furthermore, the fragments cleaned by water medium are measured and recorded for distribution and morphology analysis. Significant pressure pulses and temperature gradient almost not occur during MFCI and the molten copper is finely fragmented possibly due to hydrodynamic and thermodynamic effects. And the experimental results are helpful to confirm the prediction of fragmentation mechanism and to validate physical model, which can be applied to the development and validation of analysis code.

Experimental Investigation of Fission Gas Release from Defective Fuel Rods

CFD Study on Mechanisms of Fission Gas Burst Release from Defective Fuel Rods of a Typical PWR

Simulation experiment study on release of fission gas at fuel cladding failure

CFD Simulation of Fission Gas Release under Fuel Defects Condition in Pressurized Water Reactor

Determination of escape rate coefficients of fission products from the defective fuel rod with large defects in PWR

Phase-field simulation study on fission gas release behavior of large grain UO2 fuel

Basic Experiments During Loss of Vacuum Event (LOVE) in Fusion Experimental Reactor

Experimental investigations on flow-induced vibration characteristics of fuel rod with an independent channel for small lead-based reactor

Experimental Study on Fuel Rod Melting Based on Alternative Materials

Release of unstable fission products from defective fuel rods to the coolant of a PWR

Study on the Effect of Flow Blockage Due to Rod Deformation in QUENCH Experiment

Review on Models to Evaluate Coolant Activity under Fuel Defect Condition in PWR

EXPERIMENTAL RESEARCH ON ENERGY RELEASE AND FRAGMENTS CHARACTERISTICS UNDER MOLTEN MATERIALS DISCHARGED INTO LIQUID SODIUM

Experimental Study on the Natural Circulation Behavior of a Full-Scale PWR Fuel Assembly

A kinetic rate theory modelling of fission gas release and fuel swelling for UN fuels

Numerical Simulation of Fragmentation of Melt Drop Triggered by External Pressure Pulse in Vapor Explosions

Review of fission gas release in liquid metal reactor fuel cladding failure accident

An Iterational Physical Decoupling Method for Assessing the Safety of Deformed Fuel Channels

Study on safety gap between fuel channels in NHR200-II

Experimental and Numerical Study on the Oxidation and Melting Behaviors of Annular Fuel Rod under High Temperature Steam Condition

Numerical Simulation Investigations on the Flow Induced Vibration of a Nuclear Fuel Rod with Relaxed Clamping Structures