Abstract:Polymer clay nanocomposites, which can exhibit many superior properties compared to virgin polymers, have gained increasing interest and importance in recent years. This study aimed to prepare composites of two organoclays with unusual ratios and different degrees of lyophilicity with low-density polyethylene and compare their textural structures and thermal and mechanical properties with those of virgin polymer. For this purpose, firstly, organoclays, hydrophobic and superhydrophobic organoclays (OC and SOC), were prepared by solution intercalation method using cetyltrimethylammonium bromide with and without addition of a hydrocarbon substance. Then, using both organoclays, polyethylene organoclay composites were prepared and characterized using X-ray powder diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and Fourier transform infrared spectroscopy (FTIR) techniques. Additionally, tensile and hardness tests were performed to determine the mechanical properties of the composites, and differential scanning calorimetry (DSC) thermograms were taken to examine their thermal behavior. XRD patterns and HRTEM images of hydrophobic and superhydrophobic organoclays and the composites show that the characteristic smectite peak of the clay shifts to the left and expands, that is, the interlayer space widens and, in the composites, it deforms immediately at low clay ratios. HRTEM images of the composites prepared especially with low clay ratios indicate that a heterogeneous dispersion of clay platelets occurs, indicating that nanocomposite formation has been achieved. On the contrary, in the composites prepared with high clay ratios, this dispersion behavior partially turns into aggregation. In the composites prepared using up to 20% by weight of superhydrophobic organoclay, extremely stable and continuous improvements in all mechanical properties were observed compared to those of the composites prepared using hydrophobic organoclay. This indicates that by using superhydrophobic organoclay, a ductile nanocomposite of polyethylene containing inorganic components in much higher than usual proportions can be prepared.

The effect of hydrogenation of epoxy resin on the dispersion of organo-clay in the epoxy resin matrix

Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin

Effect of Clay Surfactant Type and Clay Content on the Rheology and Morphology of Uncured Fluoroelastomer/clay Nanocomposites Prepared by Melt‐mixing

Influence of Clay and Predispersion Method on the Structure and Properties of Polystyrene (ps)‐clay Nanocomposites

Effects of the Heating Rate and the Amount of Organic Montmorillonite on the Thermal Properties of the Novel Liquid Crystalline Epoxy Nanocomposite

Molecular dynamics investigation of epoxy resin adsorption mechanisms on clay surfaces and the mechanical properties of epoxy resin-clay

Effect of External Shearing Force on Exfoliation Structure and Properties of High-Performance Epoxy/clay Nanocomposites

EFFECT OF CURING AGENTS AND CURING CONDITIONS ON INTERCALATION AND EXFOLIATION BEHAVIOR OF EPOXY/CLAY NANOCOMPOSITE

Study on Structure and Mechanical Properties of Epoxy/clay Nanocomposites Prepared by Shear Dispersing Method

Preparation of Polyethylene Clay Composites via Melt Intercalation Using Hydrophobic and Superhydrophobic Organoclays and Comparison of Their Textural, Mechanical and Thermal Properties

Enhanced Thermal and Mechanical Properties of Cardanol Epoxy/Clay-Based Nanocomposite through Girard's Reagent

Synthesis of epoxy–clay nanocomposites. Influence of the nature of the curing agent on structure

A comprehensive study on the curing kinetics and network formation of cyanate ester resin/clay nanocomposites

Study of the Exfoliation Process of Epoxy–clay Nanocomposites by Different Curing Agents

Dielectric response of modified epoxy/clay nanocomposites

Epoxy Based Nanocomposites with Fully Exfoliated Unmodified Clay: Mechanical and Thermal Properties

Steric Effects on the Rheology of Nanocomposite Gels of Organoclay in Dicarboxyl-Terminated Polybutadiene

Epoxy-silicate nanocomposites: Cure monitoring and characterization

A New Epoxy-Based Layered Silicate Nanocomposite Using a Hyperbranched Polymer: Study of the Curing Reaction and Nanostructure Development

Microstructure and Exfoliation Mechanism of Clay Particles of Epoxy/Clay Nanocomposites under External Shearing Force

The effect of organobentonites from spent bleaching earth (SBE) and commercial bentonite on nanocomposite properties