Abstract:Acoustical methods are playing an important role for nondestructive evaluation (NDE) of adhesive-bonded composites and components in industrial applications. A dual-frequency ultrasonic technique is proposed for the quantitative evaluation of contact strength between pressed solid surfaces. An ultrasonic excitation consists of two primary frequency components is applied perpendicular to the interface, and the transmitted wave is examined. Theoretical study is based on a perturbation analysis of contact acoustic nonlinearity (CAN) model, predicting the generation of difference and sum frequency waves, together with the second harmonics. Nonlinear parameters are defined to describe the nonlinearity generation efficiencies. Experiments are performed for three types of interfaces, i. e. the interfaces of two aluminum alloy blocks with and without couplant and two glass blocks. The difference frequency wave component has bigger generation efficiency than other nonlinear components, which offers an advantage of high SNR and good detection capability of contact stiffness (interfacial stiffness). For each interface, the first and second-order interfacial stiffness are measured with contact pressure increasing from near zero to about 0.8 MPa with the aid of a laser interferometer. Finally, numerical simulations are also carried out, and a consistency is found between measurements and calculations. The dual-frequency ultrasound sent to the interface generates at least four second-order nonlinear components, which enriches the CAN technique for interface quality examinations. Both measured and simulated results indicate an increase of interfacial stiffness and decrease of nonlinear parameters with growing contact pressure. Moreover, measured results show that couplant between interfaces influences the contact stiffness evaluations in an enhanced manner, while the contact pressure determined by measured interfacial stiffness values are underestimated due to the couplant. The main problem comes from the contact between the transducersample interfaces, which brings extra nonlinearity to the detected signals and affect the accuracy of measuring. Copyright© (2010) by the International Congress on Acoustics.

A Novel Approach of Interface Stiffness Identification Based on Wave Propagation Method

A Numerically Stable Dynamic Coefficient Method and Its Application in Free Vibration of Partial-Interaction Continuous Composite Beams

Theoretical and experimental study on interface stiffness measurement of rough surface using improved acoustic model

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

Dynamic Identification of Tangential Contact Stiffness by Using Friction Damping in Moving Contact

A Joint Stiffness Identification Method Based on Finite Element Modeling and Frequency Response Functions

A novel acoustic model for interface stiffness measurement of dry tribological interface considering geometric dispersion effect and boundary effect

On obtaining machine tool joints stiffness by integrated modal analysis

Contact Stiffness Identification Method for Joint Surface and the Effect of Contact Stiffness on the Dynamic Response of the Cable Bracket

A Method for the Analysis of Dynamic Response of Structure Containing Non-Smooth Contactable Interfaces

Study of Interfacial Stiffness by Using the Structural Interface Model Based on Elastic Mechanics

Simulation and Experiment Study on System Identifications of Elastically Jointed Structures

An Acoustic Model for Stiffness Measurement of Tribological Interface Using Ultrasound

Evaluation of contact stiffness between solid-solid interfaces using dual-frequency ultrasound

Theoretical Modification for the Measurement Method of Shear Contact Stiffness

Quantitative Evaluation of Contact Stiffness Between Pressed Solid Surfaces Using Dual-Frequency Ultrasound

Contact stiffness of the multi-indenter contact interface

Dynamic Stiffness Identification of Bolted Joints

Coupling dynamic stiffness identification of mechanical assembly with linear and planar connection by the indirect scheme of inverse substructuring analysis

Image Method for Measuring Normal Interfacial Stiffness

Contact Stiffness of Rough Mechanical Joint Surface