Abstract:To probe the significant interstitial effects coupling with metastability design of high-entropy alloys (HEAs), we introduced both interstitial C and N into a representative metastable HEA. The mechanical behavior of the novel C-N co-doped interstitial HEA (iHEA) with nominal composition Fe48.5Mn30Co10Cr10C0.5N1.0 (at. %) in different grain sizes has been investigated via digital image correlation (DIC) assisted tensile testing. The microstructure characteristics prior to and after tensile deformation with different local strain levels were probed by various techniques. The C-N co-doped iHEA shows a face-centered cubic (FCC) matrix without hexagonal closed packed (HCP) martensite after annealing plus the subsequent quenching, different from the reference metastable FCC-HCP dual-phase HEA without interstitials. Upon tensile deformation, dislocation slip and twinning prevail, and the new iHEA does not show phase transformation which is the primary deformation mechanism in the reference interstitial-free metastable HEA. This further confirms the enhanced FCC phase stability due to C-N co-doping. The interstitial effect coupling with the multiple strengthening mechanisms including twinning induced plasticity (TWIP) and nano-particle strengthening due to nano-sized carbonitrides leads to significantly higher yield strength (753 MPa) and ultimate tensile strength (1038 MPa) at good ductility (48.0%) compared to that of the reference interstitial-free metastable HEA (∼250 MPa, ∼850 MPa and ∼70%, respectively) at a similar grain size of ∼4 μm. Accordingly, our work demonstrates the significant capability of interstitials including C and N for tuning the phase stability and enhancing mechanical properties of HEAs.

The Determining Role of Carbon Addition on Mechanical Performance of a Non-Equiatomic High-Entropy Alloy

Tuning the microstructure and strengthening mechanism of the CoCrFeNi high-entropy alloy via doping metalloid and interstitial elements

Enhancing the strength-ductility trade-off in C 0.1 CrMnFeCoNi 0.8 high-entropy alloy: A combined experimental and DFT study

Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys

Plasticity Improvement in a Co-Rich Co40Fe25Cr20Ni15 High-Entropy Alloy via Al Alloying

Plasticity Improvement in a Co-Rich Co<sub>40</sub>Fe<sub>25</sub>Cr<sub>20</sub>Ni<sub>15</sub> High-Entropy Alloy via Al Alloying

Development of a large size FCC high-entropy alloy with excellent mechanical properties

Improving Mechanical Properties of Co-Cr-Fe-Ni High Entropy Alloy via C and Mo Microalloying

Dual-interstitials promoted multiple mechanisms enhance strength-ductility synergy of an equiatomic high-entropy alloy

Tensile properties and strengthening mechanisms of eutectic high-entropy alloys induced by heterostructure

A great enhancement of both strength and plasticity in a dual-phase high-entropy alloy by multi-effects of high carbon addition

Carbon and nitrogen co-doping enhances phase stability and mechanical properties of a metastable high-entropy alloy

Influence of V and Al in Enhancing the Strength and Ductility of Co-rich High-Entropy Alloys

Nano-twinning Induced High Strain Hardening Behavior in a Metastable As-Cast Co30Cr30Fe20Ni20 High Entropy Alloy at Room Temperature

Carbide Precipitation Strengthening in Fine-Grained Carbon-Doped FeCoCrNiMn High Entropy Alloy

Effects of deformation and annealing on the microstructures and properties of a nonequiatomic Co29Cr29Fe29Ni12.5W0.5 high-entropy alloy

Significant enhancement in comprehensive mechanical properties of Cr-Fe-Ni-Al-Si-Ti-Cu high-entropy alloy in as-cast state via C microalloying

Dynamic impact behavior and deformation mechanisms of Cr26Mn20Fe20Co20Ni14 high-entropy alloy

Strengthening and deformation mechanism of high-strength CrMnFeCoNi high entropy alloy prepared by powder metallurgy

Excellent Strength-Ductility Synergy Assisted by Dislocation Dipole-Induced Plasticity in Co-free Precipitate-Strengthened Medium-Entropy Alloy

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment