Development of a Novel Metastable Beta Titanium Alloy with Ultrahigh Yield Strength and Good Ductility Based on Laser Power Bed Fusion

Xu Chen,Chunlei Qiu

DOI: https://doi.org/10.1016/j.addma.2021.102501

IF: 11

2021-01-01

Additive Manufacturing

Abstract:Metastable beta titanium alloys are known for excellent ductility and corrosion resistance but relatively low yield strength (YS) which restricts their application. In this study, a novel high strength metastable beta titanium alloy, Ti6Mo-5.5Cr-1Co-0.1C (wt%) was developed based on laser powder bed fusion (L-PBF). It is shown that the asfabricated material was dominated by mixed columnar and equiaxed beta grains decorated by numerous fine TiC flakes. The precipitates were interconnected to each other and connected to grain boundaries (GBs) by dislocations. Solution treatment at 850 degrees C led to dissolution of intra-granular TiC and diffusion of C to GBs through dislocation pipes, which created vast carbide-free beta grain interior areas that are good for deformation and promoted formation of bulk and polygonal TiC along GBs. The GB TiC particles acted as effective O getter of the matrix, which together with significant co precipitation helped stabilize the beta matrix. As a result, beta -+ alpha '' phase transformation and mechanical twinning have been suppressed. The samples deformed mainly through dislocation slip and co -+ beta reverse phase transformation. Ultrahigh YS and decent ductility have thus been achieved in the newly developed metastable beta titanium alloy. The current work paves the way for developing high performance metastable beta titanium alloys through additive manufacturing.