Abstract:Deep decarbonization is the goal of modern power systems, so it is inevitable that large-scale wind farms will be integrated into systems. This also gives rise to many problems, which have been studied in detail in the literature. However, these studies basically have two deficiencies. One is to assume that traditional generator units are fully loaded, and the other is not to compare the differences in the impact of different types of wind farm. This paper discusses these two points in detail. Taking a series-compensated transmission system as the research object, and assuming that the wind farm only replaces part of the power of the traditional generator unit in the transition period of energy conversion, the difference between the torsional vibration behaviors of the traditional unit caused by adopting different types of wind farm is discussed. The results of the study show that the impact of integration of the type 3 wind farm is dominated by the induction generator effect of doubly fed induction generator units. The penetration rate as low as 19% could cause instability. However, the paralleled metal-oxide varistor can effectively improve the stability. For the type 4 wind farm, the dominant factor turns out to be the de-rating operations of the steam turbine generator unit. The allowable penetration rate depends on the turbine damping. When the turbine damping is sufficient, the penetration rate can be as high as 87.5%. In conclusion, in order to integrate wind farms into a series compensated transmission system, one should not only focus on the compensation factor to avoid the sub-synchronous torsional vibrations, but also pay attention to the types of wind farm as well as the penetration rate. The findings can be used as the decision-making basis for the integration of wind farms during the energy transition period.

Investigating the Transient Torque of Turbo-Generators in a Power System Integrating Wind Farms

Impact of Wind Turbines on Power System Stability

Analysis of Flexural and Torsional Vibration for Turbogenerator Shafts on Power Impact

Study on the Influencing Factors and Mechanism of SSR Due to DFIG-based Wind Turbines to a Series Compensated Transmission System.

Modeling Principle and Parameter Identification of Double Fed Wind Turbine for Electromechanical Transient Simulation of Power System

Investigation of Transient Torque During A Power System Fault in Wind Power Turbines Having A Dfig and Crowbar Circuit

Computation of transient electromagnetic torque in a turbogenerator under the cases of different sudden short circuits

Characteristics of Air Gap Magnetic Fields in Inter Turn Field Winding Short Circuit of Large Turbo Generator

Study on Transient Characteristics of Grid-Connected Wind Power Generators

Investigation of the Effects of Various Types of Wind Turbine Generators on Power-System Stability

Comparison of Impact on Turbine Shafts Torsional Behavior for Integration of Two Types of Wind Farm into a Series-Compensated Transmission System

Review on Wind Turbine Models for Power System Transient Simulations

Effects of wind generation intermittency and volatility on power system transient stability

An Integrated Electromechanical Model of the Fixed-Speed Induction Generator for Turbine-Grid Interactions Analysis

Study On Torsional Vibration Of Turbine Generator Shafts Owing To Network Disturbance

Impact of Synchronous Generator Transient on Gas Turbine Rotor

Analysis of Influencing Factors on Transient Voltage Stability of a Grid-connected DFIG-based Wind Farm

Study on the Mechanism of Transient Voltage Stability of Wind Power with Power Electronic Interface

Method to Evaluate the Impact of Integration of PMSG on Stability of Synchronous Generator Shaft Under Weak Grid Connection

Torsional Vibration Characteristic Study of the Grid-Connected Dfig Wind Turbine

Frequency Domain Analysis of Wind Farm on the Damping Characteristics of a Nearby Synchronous Generator