Abstract:Polymeric nanocomposite insulations are receiving the widespread attention of the electrical cable industry. This paper presents the electrical insulation performance of as-received commercial 320 kV high-voltage direct-current (HVDC) cross-linked polyethylene (XLPE)/MgO nanocomposite material with reference to the pure XLPE. The results of this commercial-grade electrical insulation material are not reported hitherto. The scanning electron microscopy confirms the well-dispersed nanofiller inside the polymer matrix. The DC electrical insulation performance is investigated by DC breakdown strength, space charge, DC electrical conductivity, and surface potential decay measurements. The test samples are subjected to the thermal aging at 135 degrees C for 30 days. The un-aged nanocomposite exhibits 20% higher DC breakdown strength, negligible hetero space charge accumulation, and the lower DC conductivity by one order than the un-aged pure XLPE. Moreover, thermally aged nanocomposite shows more restraint to the deterioration of its properties. After the thermal aging, the DC breakdown strength decreased by 38% and 20% in the pure XLPE and its nanocomposite, respectively. Thermally aged nanocomposite shows negligible hetero charges and an increase in the DC conductivity by one order. However, the pure XLPE shows higher hetero charge accumulation and the increased DC conductivity by one order. In un-aged XLPE nanocomposite higher crystallinity, higher deep trap density, and the lower carbonyl index are found to be the primary attributes of its improved performance. It is postulated that these significantly unchanged attributes can be the reason for the better anti-thermal aging properties of the XLPE nanocomposite.

Effect of Cryogenic Temperature on DC Electrical Tree Initiation Characteristics of Epoxy Nanocomposites

DC Electrical Tree Characteristics in Epoxy Resin at Cryogenic Temperature

DC Breakdown and Surface Potential Behavior of Epoxy/Al<sub>2</sub>O<sub>3</sub> Nanocomposites at Cryogenic Temperature

Electrical Treeing in Polyethylene-Alumina-filled Nanocomposites for HVDC Applications

Effect of Plasma-Treated Nano-Al2O3 on DC Insulation Properties of Epoxy Nanocomposites at Cryogenic Temperature

Influence of DBD Treated Nano‐al2o3 on Thermal and Electrical Insulation Properties of Epoxy Nanocomposites at High Temperatures

Growth Characteristics of Electrical Trees in Epoxy Resin at Cryogenic Temperatures

Electrical treeing behavior at high temperature in XLPE cable insulation samples

Enhanced Thermal and Dielectric Performance of Epoxy Resin/aluminum Nitride Nanocomposites at High Temperatures

Electrical Insulation Performance of Cross‐linked Polyethylene/mgo Nanocomposite Material for ±320 Kv High‐voltage Direct‐current Cables

Electrical tree formation as a measure of degradation resistance in polymeric materials for HVDC applications

Thermal and Electrical Properties of EP/AlN Nanocomposites at Different Temperatures

Investigation of Electrical and Thermal Behavior of Modified Epoxy Structures for DC and High Frequency Applications

Electrical Tree Characteristics of Epoxy Resin/Aln Nanocomposites in LN<sub>2</sub> With Repetitive Nanosecond Pulse Voltage

Effect of Cryogenic Temperature on Tree Characteristics in Silicone Rubber/Sio2 Nanocomposites under Repetitive Pulse Voltage

Mitigation of electrical treeing at high temperature in nano‐SiO2 doped epoxy resin

Effect of Temperature on the Conducting and Partial Discharge Characteristics of Electrical Trees under Combined AC and DC Voltage in Epoxy Resin

Investigation of Thermal Characteristics of Graphene Coated Contacts for Hybrid HVDC Circuit Breaker

DC Breakdown Strength of Crosslinked Polyethylene Based Nanocomposites at Different Temperatures

AC and DC Pre-Stressed Electrical Trees in LDPE and Its Aluminum Oxide Nanocomposites