Abstract:Marine diesel engines are widely used with their strong power and mature technology. However, in recent years, the emphasis on environmental protection has made combustion pollutants the focus of attention, and the new regulations of the International Maritime Organization (IMO) and various countries have put forward new requirements and challenges for diesel engine combustion and emission performance. Due to the large size and large amount of circulating fuel injection, the incomplete mixing of fuel in the cylinder and the local violent combustion of high-power medium-speed marine diesel engines are important reasons for low thermal efficiency and high pollutant emissions. To achieve efficient and clean combustion of fuel in the cylinder, a dual-injector combustion system is designed on a dual-fuel engine basis, aiming to add a micro-injection before the central injection and provide positive in-cylinder flow and hot atmosphere for the atomized combustion of the central-injection fuel, so that the combustion in the cylinder is reasonably arranged, the thermal efficiency is improved and NOx emissions are reduced. The 3D simulation model was established by CFD software CONVERGE, and the physical model was calibrated according to the data of the pure diesel mode of the dual-fuel engine, and the influence of the small pilot-injection fuel volume on the development of spray and combustion in the cylinder at high and low load was analyzed. It was found that the small pilot-injection fuel volume at a high load had little effect on the atomization evaporation of the main-injection fuel and the hot atmosphere in the cylinder, so the improvement effect of combustion quality was not obvious, while the pilot-injection volume with the same pilot-injection capacity as high load relatively accounted for a large proportion at the low load with a small cycle injection volume. Without changing the injector specification settings of the original dual-fuel engine, the thermal efficiency was increased by 6.13% and the NO x generation was reduced by 22.42% by optimizing the injection timing, injection duration, and injection amount.

Study on Characteristics Optimization of Combustion and Fuel Injection of High-Power Diesel Engine Based on Orthogonal Method

Study on Characteristics Optimization of Combustion and Fuel Injection of Marine Diesel Engine

Multi-Dimensional Simulation of Combustion System Optimization for a High Power Diesel Engine by Using Orthogonal Design Method

Optimization of Marine Medium Speed Diesel Engine Performance Based on Multi-Injector System

Research on Combustion Process Optimization of Marine Diesel Engines Based on Dual-Injector System

Influence of fuel injection system's optimization on performance of diesel engine and its injection parameter re-optimization

Optimization of Parameters of Fuel Injection System for Improving Performance of Marine Diesel Engine and Corresponding Experimental Tests

Weight Analysis in the Effect of Combustion System Parameters on Combustion Performance in a High Speed Direct Injection Diesel Engine

Optimization of the Combustion System in a Marine Engine based on Orthogonal Design Method

Optimization of Combustion Process for High Power Diesel Engine

Numerical Simulation on Structural Optimization Design of Combustion Chamber of High Strength Diesel Engine

Optimization of a Marine Medium-Speed Engine With Multi-Injector System by 1D Predictive Simulation

Numerical study on the injection strategy on combustion and emission characteristics of a non-road diesel engine under different altitude conditions

Optimization of Diesel Engine Fuel Injection System Parameters Based on Simulations

Study on the combustion and emission characteristics of a diesel engine with multi-injection modes based on experimental investigation and computational fluid dynamics modelling

The Research Of Structural Optimization On Diesel Engine Injection Nozzle

Application of CFD, Taguchi Method, and ANOVA Technique to Optimize Combustion and Emissions in a Light Duty Diesel Engine

Numerical simulation research into effects of injection rates on performances and emissions of diesel engine

Experimental study and optimization in the layouts and the structure of the high-pressure common-rail fuel injection system for a marine diesel engine

Numerical Study on the Effects of Multiple-Injection Coupled with EGR on Combustion and NOx Emissions in a Marine Diesel Engine

Numerical Optimization of Natural Gas and Diesel Dual-Fuel Combustion for a Heavy-Duty Engine Operated at a Medium Load