Abstract:Facing the apparent enhancement of rated power of offshore wind turbines, the increasing rotor diameter and blade length gradually pose severe challenges to its support structure for resisting extreme loads. Due to the remarkable composite effect, the recently developed tapered concrete-filled double skin steel tubular (CFDST) members can provide a high-performance structural type and competitive application prospect compared to traditional steel tower barrels. Therefore, this paper conducted the numerical and theoretical research on out-of-code tapered CFDST members under pure torsion and compression-torsion combination. The finite element (FE) model was established to examine the full-range mechanism including torque versus deformation response ( T - θ curve), interaction behavior and component contribution, indicating that four characteristic points can distinguish the T - θ curve under pure torsion, and slight contact pressure between the inner tube and sandwich concrete exists along the height direction. The parametric study was performed to investigate the influences of geometric-physical parameters, e.g., by increasing tapered angle ( ψ ) 0.2°, the torsional capacity obtains a reduction of 5%; hollow ratios ( χ ), axial compression ratios, and diameter-to-thickness ( D / t ) ratios of double-skin tubes obviously affect the torsion resistance; altering steel yield grade influences torsional capacity than concrete grade. Subsequently, a theoretical multilayered cylinder model as the simplified design tool was proposed to simulate full-range T - θ curves of tapered CFDST members. Moreover, a modified design method for calculating N - T correlation curve was developed and validated by introducing the refined equations of pure torsion resistance ( T u ), where the design methods in current codes displayed a quite conservative prediction for tapered CFDST members with out-of-code parameters (e.g., hollow ratios or D / t ratios). The above research on out-of-code tapered CFDST members can offer valuable design guidelines for its engineering applications.

Innovative Post-tensioned Hybrid Wind Turbine Tower Made of Ultra High Performance Cementitious Composites Segment

Structural Behavior Analysis of UHPC Hybrid Tower for 3-MW Super Tall Wind Turbine Under Rated Wind Load

Axial Compressive Behavior and Load Carrying Capacity Prediction of Prefabricated UHPC Tube Filled with Seawater Sea-Sand Coral Aggregate Concrete

Damage evolution and failure analysis of the advanced transition segment behavior of wind turbine tower

Compressive Behavior and Strength Prediction of Ultra-High Performance Concrete Confined by Normal and High Strength Steel Hoops

Mechanical behavior of prestressed UHPC wind turbine tower columns under combined axial compression and bending

Research on hexagonal concrete-filled steel tubular transition pieces for wind turbine hybrid towers under axial compression

Feasibility study of anti-strong-wind cable-tower structure

Ultra High Performance Cementitious Hybrid and Flexural Analysis of the UHPCC-NC Hybrid Structure with Full Shear Connection

Research on the Compression-Bending Behavior of Concrete-Filled Double-Steel-plate Composite Bridge Towers

Application of Cement-Based Composite Nanomaterials in Prefabricated Thin-Wall Light Steel Structure Composite Wall

Hybrid FRP-concrete-steel prestressed double-skin wind turbine towers: Concept, design considerations and research needs

Wind-Induced Response Analysis and Fatigue Life Prediction of a Hybrid Wind Turbine Tower Combining an Upper Steel Tube with a Lower Steel Truss

Ultimate torsional moment of dry horizontal joint for prefabricated concrete tower

Dynamic characteristics of segmental assembled HH120 wind turbine tower

Experimental and analytical study on the load‐bearing capacity of segmented tower structures with dry joints under combined loading

Analytical behavior and bearing capacity research on out-of-code tapered CFDST members under pure torsion and compression-torsion combination

Ultra-high-strength engineered/strain-hardening cementitious composites (ECC/SHCC): Material design and effect of fiber hybridization

The construction process for pre-stressed ultra high performance concrete communication tower

Design optimization of steel–concrete hybrid wind turbine tower based on improved genetic algorithm

BUCKLING BEHAVIOUR OF THE STEEL PLATE IN STEEL – CONCRETE – STEEL SANDWICH COMPOSITE TOWER FOR WIND TURBINE