Abstract:A normal composite wall panel is a structural component composed of polystyrene insulation boards and concrete surface layers reinforced with steel wire mesh. It can be entirely prefabricated in a factory or constructed with the concrete surface layers cast on-site. A novel prefabricated monolithic concrete–polystyrene panel composite wall panel (CPC wall panel) is proposed in this study. The CPC panel features a middle part that is prefabricated in the factory while the reinforced concrete regions at its two side ends are cast on-site. To evaluate the seismic performance of the wall panel, 18 CPC specimens were designed, manufactured, and quasi-statically tested, through which the structural behaviors, failure mode, and load-bearing capacity were studied. In addition, the influences of the height-to-width ratio and the vertical compressive stress level on the seismic performance of the CPC panels were also investigated. The test results showed that the connectors spaced at 400 mm × 500 mm could ensure the concrete layers on both sides of the polystyrene board worked collectively under seismic conditions. When subjected to lateral loads, the interface between the newly poured concrete and the existing concrete exhibited good bonding. Moreover, the failure mode of the CPC wall panel was largely correlated to the height-to-width ratio that, for specimens having four steel bars of 12 mm diameter and a height-to-width ratio greater than 1, the flexural failure was initially developed, followed by diagonal shear failure. In specimens with a height-to-width ratio of 1, flexural and diagonal shear failures occurred almost simultaneously. For specimens with a height-to-width ratio of less than 1, the final diagonal shear failure was predominant. The longitudinal reinforcing bars at the two ends of the CPC panels could effectively improve their lateral load-bearing capacity, with the enhancement influenced by the height-to-width ratio, the vertical load applied to the wall panel, and the cross-sectional area of the steel bars. In practice, the lateral load-bearing capacity of the CPC panel can be conservatively evaluated using the calculation method of the reinforced concrete shear walls. Finally, the ductility of the CPC specimens was affected by the height-to-width ratio and the axial compressive stress level, such that the specimens with a larger height-to-width ratio and lower axial compressive stress exhibited better ductility.

Application of Cement-Based Composite Nanomaterials in Prefabricated Thin-Wall Light Steel Structure Composite Wall

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Seismic behavior of high strength concrete composite walls with embedded steel truss

Experiments and Numerical Simulations on the Seismic Performance of Steel-Frame Composite Wallboard Shear Walls

Seismic behavior of a new type of precast concrete shear wall using UHPC connections at boundary elements

Effect of axial compression ratio on concrete-filled steel tube composite shear wall

Axial compressive behavior of high-strength steel-UHPC-clad steel composite walls

Experimental Study on Seismic Performance of Prefabricated Monolithic Concrete–Polystyrene Panel Composite Wall Panels

Seismic performance of novel bolt-connected precast concrete walls strengthened by UHPC

Experimental study on seismic performance of a low-energy consumption composite wall structure of a pre-fabricated lightweight steel frame

Seismic performance of a novel partly precast RC shear wall with double precast edge members and a central T-shape CIP member

Seismic behavior of prefabricated steel multi-ribbed composite walls connected with cast steel joints

Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements

Seismic Performance of Precast Double-Skin Composite Shear Wall with Horizontal Connection Region

Mechanical property test and numerical analysis of a novel precast shear wall

Seismic behavior of shear walls partially strengthened with UHPC in boundary element

Experimental Study on Seismic Behaviour of an Unreinforced Precast Wall-Slab Structure Based on UHPC Sandwich Panels

Seismic behavior of steel tube-double steel plate-concrete composite walls: Experimental tests

Research advances of composite shear walls with double steel plates and filled concrete

An exhaustive research and analysis on seismic performance of prefabricated concrete shear wall structure

Seismic behavior of prefabricated concrete filled steel tube-bordered monolayer reinforced shear wall