Abstract:To investigate the performance of reinforced-concrete frames with buckling restrained braces (RCF-BRB) subjected to bidirectional earthquakes, a full-scale two-story RCF-BRB was tested using substructured pseudodynamic (PsD), quasistatic, and pushover techniques. This paper focuses on the structural modeling for the substructured PsD tests, and the control and measurement issues of the bidirectional loading system. To make a credible reproduction of the structural response using substructured PsD technique, an overlap modeling technique together with tuning the mass of the lamped-mass model and stiffness of the numerical substructure was employed to reduce errors caused by the incomplete boundary condition. The outer-loop control method based on Newton's iteration method was introduced for the loading system, with the data from external displacement sensors as the feedback to avoid errors caused by possible gaps in the connection parts of the loading system. The redundancy issue, caused by the actuators outnumbering the degrees of freedom of the floor to be controlled, is addressed with a force-displacement mixed control technique. The three of four actuators were controlled in displacement mode, whereas the redundant one was in force mode. The force command to the redundant actuator was determined with the optimization criteria to minimize the loads relative to the capacities of the actuators. The working range of the displacement sensors is investigated using numerical and geometric approaches. Failure examples from numerical simulation and experiment were shown to emphasize the importance of proper arrangement of displacement sensors. A rearrangement of the displacement sensors was proposed for the pushover test to enlarge the working range. Time-history results of the prototype structure using the calibrated finite-element model show that the PsD substructure test results could represent seismic responses of the prototype structure. The measured mass-center displacements accurately tracked the target displacements throughout the test, indicating the effectiveness of the loading control and measuring system.

Dynamic and Probabilistic Seismic Performance Assessment of Precast Prestressed Rcfs Incorporating Slab Influence Through Three-Dimensional Spatial Model

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

Seismic Performance of Circular Recycled Aggregate Concrete-Filled Steel Tubular Columns: FEM Modelling and Sensitivity Analysis

Analytical Investigation of the Differences between Cast-In-Situ and Precast Beam-Column Connections under Seismic Actions

Seismic performance improvement of existing RCFs using external PT-PBSPC frame sub-structures: Experimental verification and numerical investigation

Effect of Slab on the Performance of RC Frame Structures

Influence of Slab Spatial Composite Effect on Dynamic Behaviour of Composite Frame Structures under Earthquake Excitation

A stochastic CSM-based displacement-oriented design strategy for the novel precast SRC-UHPC composite braced-frame in the externally attached seismic retrofitting

Seismic behavior of reinforced concrete frame substructure with cast-in-place slab on independent foundation

Seismic performance assessment of different fibers reinforced concrete columns using incremental dynamic analysis

Cyclic behavior and numerical study of PRC coupling beam with steel truss floor slab

Experimental Study on Seismic Behaviour of an Unreinforced Precast Wall-Slab Structure Based on UHPC Sandwich Panels

Seismic behaviour of plate-reinforced composite coupling beams with RC slabs

Experimental and theoretical analyses of the progressive collapse resistance of NSM strengthening RC frames after the failure of a corner column

Probabilistic Seismic Performance Assessment of RC Frames Retrofitted with External SC-PBSPC BRBF Sub-structures

Seismic demands of structural and non-structural components in self-centering precast concrete wall buildings

Simplified Theoretical Analysis and Numerical Study on the Dynamic Behavior of FCP under Blast Loads

Seismic Performance of a Full-Scale Precast Concrete L-Shaped Column Frame Structure with a Grouted Connection

Substructure Modeling and Loading-Control Techniques for the Test of a Full-Scale Spatial RC Frame with Buckling-Restrained Braces Subjected to Bidirectional Loading

Optimal Design of the Connection Between RC Slab and Precast Pre-Stressed Beam to Column Joint

Performance-based assessment of slender reinforced concrete columns typical of precast industrial buildings