Abstract:Owing to their sufficient ductility, conventional steel moment-resisting frames (MRFs) are widely used as seismic-resistant systems in building structures. However, the ductile behavior introduces significant residual displacement after earthquakes, leading to massive economic losses caused by difficult or even unfeasible repairs. This paper intends to propose a machine learning-driven probabilistic residual displacement-based design method for retrofitting MRFs using self-centering braces (SCBs) and improving the post-earthquake repairability by reducing the residual displacement to a target level. The influence of the SCB's design parameters on the peak and residual displacements of the enhanced MRF are first investigated through parametric dynamic analysis of single-degree-of-freedom (SDOF) systems. The probabilistic residual displacement prediction models are developed using different machine learning algorithms. Analysis results indicate that the artificial neural network (ANN) models demonstrate the highest accuracy with the greatest coefficient of determination (R2) and lowest root mean squared error (RMSE). A software was developed based on the ANN models for predicting the probabilistic peak and residual displacement responses of the retrofitted MRF (RMRF). Then the proposed probabilistic residual displacement-based design steps are introduced. Finally, a three-story benchmark MRF is retrofitted using the proposed design method with two different performance objectives. Nonlinear static and dynamic analyses are conducted to investigate the seismic responses of the designed RMRFs. The analysis results show that the RMRFs can achieve the desired performance objective, confirming the effectiveness of the proposed design method. The SCB can significantly reduce the residual displacement of the RMRFs, where the RMRFs are fully recoverable (with a probability of 100%) without any need for repair after maximum considered earthquakes.

A stochastic CSM-based displacement-oriented design strategy for the novel precast SRC-UHPC composite braced-frame in the externally attached seismic retrofitting

Probabilistic Seismic Performance Assessment of RC Frames Retrofitted with External SC-PBSPC BRBF Sub-structures

Research on the Seismic Retrofitting Performance of RC Frames Using SC-PBSPC BRBF Substructures

Pushover-based probabilistic seismic capacity assessment of RCFs retrofitted with PBSPC BRBF sub-structures

Seismic performance improvement of existing RCFs using external PT-PBSPC frame sub-structures: Experimental verification and numerical investigation

Two-level Performance-Based Seismic Design Approach for Steel Frames with Novel Self-Centring Seismic Base Isolators

Enhancing the Seismic Resilience of Steel Moment Resisting Frame with a New Precast Self-Centering Rocking Shear Wall System

Seismic Performance Enhancing of Novel Self-Centering Precast Concrete Frame Using Replaceable Hysteretic Dampers

Strength reserve-based seismic optimization for precast concrete frames with hybrid semi-rigid connections

Peak and Residual Deformation-Based Seismic Design for Multi-Story Hybrid Concentrically Braced Frames

Experimental and theoretical investigations of the existing reinforced concrete frames retrofitted with the novel external SC-PBSPC BRBF sub-structures

Performance-based plastic design of composite partially-restrained steel frame-reinforced concrete infill walls with concealed vertical slits

Seismic performance upgrade of RC frame buildings using precast bolt-connected steel-plate reinforced concrete frame-braces

Seismic performance evaluation of a self-centering precast reinforced concrete frame structure

Parametrized multi-objective seismic optimization for precast concrete frame with a novel post-tensioned energy dissipation beam-column joint

Machine Learning-Driven Probabilistic Residual Displacement-Based Design Method for Improving Post-Earthquake Repairability of Steel Moment-Resisting Frames Using Self-Centering Braces

Performance-based seismic design method for retrofitting steel moment-resisting frames with self-centering energy-absorbing dual rocking core system

Equal-displacement Principle-Based Direct Seismic-Design Method for Single-Yielding Precast-Concrete Frame

Seismic Risk Assessment of a Novel Self-Centering Precast Concrete Frame under Near-Fault Ground Motions

Experimental and Numerical Study of Outside Strengthening with Precast Bolt-Connected Steel Plate–Reinforced Concrete Frame-Brace

Performance-based design of steel frames with self-centering modular panel