Abstract:Polydimethylsiloxane (PDMS) is usually used to obtain favorable performances of waterborne polyurethane (WPU) such as higher hardness, exceptional thermal stability and lower interfacial tension. However, there is always a problem that waterborne polyurethane (WPU) often performs weak tensile strength, lower tenacity and brittle property at room temperature when polydimethylsiloxane (PDMS) is embedded into the backbone of polyurethane. The study aims to address the problem by constructing dual crosslinking structure, namely introducing trimethylolpropane as an intramolecular crosslinking agent into prepolymers and then adding waterborne polycarbodiimide (SK-400) as a post-crosslinking agent in order to further enlarge the degree of crosslinking and mainly make up for the shortcoming that mechanical property decreases when polydimethylsiloxane (PDMS) was inserted into molecule chains. Initially a novel inner-crosslinking prepolymer (SiWPU) comprising polydimethylsiloxane need to be synthesized successfully by inserting trimethylolpropane into prepolymers. Then the sample SiWPU-3 was picked out as a matrix resin and dropwise added polycarbodiimide (SK-400) as a post-crosslinking agent into the matrix resin (C–SiWPU). As pH was gradually lowering following the evaporation of triethylamine in the emulsion (C–SiWPU), carboxyl groups (COOH) in prepolymers started to react with SK-400 (NCN) to form twofold crosslinking structure. When 0%, 2%, 4%, 6%, and 8 wt% of waterborne polycarbodiimide (SK-400) was incorporated into the solution, the tensile strengths are 47.8 MPa, 57.7 MPa, 65 MPa, 57.6 MPa and 54.5 MPa and the elongation at break 732%, 756%, 798%, 707% and 700%. The crosslinking density of SiWPU-3 without the addition of waterborne polycarbodiimide (SK-400) is 3.86 × 10−3 mol/cm3. As 6 wt% of waterborne polycarbodiimide (SK-400) was added into the emulsion of SiWPU-3, the crosslinking density of C–SiWPU-6 (6 wt% SK-400) is 6.19 × 10−3 mol/cm3. The films show excellent extensibility and exceptional tenacity. Hence, the emulsion is able to be applied in leather industry.

Biooxazolidines‐enabled Improvement of Monocomponent Polyurethane Coatings

Synthesis and Characterization of Eugenol‐based Silicone Modified Waterborne Polyurethane with Excellent Properties

Preparation and Surface Properties of Silicone-Modified Polyester-Based Polyurethane Coats

Terpene derivative-containing silicone two-component waterborne polyurethane for coatings

Synthesis of non‐isocyanate polyurethanes with high‐performance and self‐healing properties

Enhancing mechanical and thermal properties of blends with novel phenylethynyl-terminated siloxane-containing ortho-hydroxy polyimide

Improving Thermal Stability of Polyurethane through the Addition of Hyperbranched Polysiloxane

Synthesis of hydroxy silane coupling agent and the silane-terminated polyurethane chain-extended by butanediol

Silane-Modified Hyperbranched Polyurethane with High Strength, High Transparency, and Low Viscosity

Synthesis of waterborne polyurethane by inserting polydimethylsiloxane and constructing dual crosslinking for obtaining the superior performance of waterborne coatings

Synthesis and Properties of Triethoxysilane-Terminated Anionic Polyurethane and Its Waterborne Dispersions

Effect of in-situ Incorporated Silica Particles on Properties of Polyurethane Elastomer

Characterization of an Aqueous Dispersion of a Hydrophilic Polyisocyanate for Waterborne Two-Pack Polyurethane Coatings

Effects of Isocyanate Structure on the Properties of Polyurethane: Synthesis, Performance, and Self-Healing Characteristics

Synthesis and Characterization of Crosslinked Castor Oil-Based Polyurethane Nanocomposites Based on Novel Silane-Modified Isocyanate and Their Potential Application in Heat Insulating Coating

Enhanced Mechanical and Dielectric Properties of Polyurethane Elastomers Containing Modified SiO 2

Biobased polyurethane coatings with fast self-healing and tunable mechanical properties derived from curcumin and castor oil

Synthesis of N-phenylaminomethyl POSS and its utilization in polyurethane

Synthesis and Properties of Moisture‐Crosslinkable Poly(Urethane‐Urea) With Intrinsic Flame Retardancy

Improvement of the Compatibilization of High-Impact Polystyrene/Magnesium Hydroxide Composites with Partially Sulfonated Polystyrene As Macromolecular Compatibilizers

Imine-containing Self-healing Waterborne Polyurethane Elastomeric Coating Derived from Bio-based Polyester Polyol