Abstract:The effect of activation environment (N2, H2 and H2S/H2) on the hydrocracking performance of a NiMo/Al catalyst was studied at 380 °C and 3.5 MPa using octacosane (C28). The catalyst physical structure and acidity were characterized by BET, XRD, SEM-EDX and FTIR techniques. The N2 activation generated more active nonsulfided NiMo/Al catalyst relative to the H2 or H2S activation (XC28, 70–80% versus 6–10%). For a comparison, a NiMo/Si-Al catalyst was also tested after normal H2 activation and showed higher activity at the same process conditions (XC28, 81–99%). The high activity of the NiMo/Al (N2 activation) and NiMo/Si-Al catalysts was mainly ascribed to a higher number of Brønsted acid sites (BAS) on the catalysts. The hydrocracking of cobalt wax using Pt/Si-Al and Pt/Al catalysts confirmed the superior activity of the Si-Al support. A double-peak product distribution occurred at C4–C6 and C10–C16 on all catalysts, which illustrates secondary hydrocracking and faster hydrocracking at the middle of the chain. The nonsulfided NiMo/Al and Pt/Al catalysts, and NiMo/Si-Al catalyst produced predominantly diesel (sel. 50–70%) and gasoline range (sel. > 50%) hydrocarbons, respectively, accompanied by some CH4 and light hydrocarbons C2–C4. On the other hand, the hydrocarbon distribution of the Pt/Si-Al varied with conditions (i.e., diesel sel. 87–90% below 290 °C or gasoline sel. 60–70% above 290 °C accompanied by little CH4) The dependence of the isomer/paraffin ratio on chain length was studied as well. The peak iso/paraffin value was observed at C10–C13 for the SiAl catalyst.

The Products Distribution-Tuned and Inhibiting Cracking of Fatty Acid Hydrogenation over Co@SiO2 Porous Nanorattles

Product Distribution-Tuned and Excessive Hydrocracking Inhibiting in Fatty Acid Deoxygenation over Amorphous Co@SiO2 Porous Nanorattles

Influence of Porosity on Product Distribution over Co/H-ZSM-22 Catalysts in the Upgrading of Palmitic Acid

Tailoring Product Distribution During Upgrading of Palmitic Acid over Bi-Functional Metal/zeolite Catalysts

Insights into Influence of CeO2 Crystal Structure Effects on Hydrothermal Hydrogenation for Palmitic Acid over Ni/CeO2 Catalysts

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

Temperature–Controlled hydrothermal hydrogenation of palmitic acid to alkanol or alkanes over Co@CN–x catalysts derived from ZIF–67

Hydrothermal Hydrogenation/deoxygenation of Palmitic Acid to Alkanes over Ni/activated Carbon Catalyst

MOF-Derived Co3O4 Nanoparticles Catalyzing Hydrothermal Deoxygenation of Fatty Acids for Alkane Production

Co-production of hydrogen and carbon nanotubes from cracking of waste cooking oil model compound over Pt–Ni/SBA-15 catalysts

Hydrothermal hydrogenation/deoxygenation of palmitic acid to alkanes over Ni/AC catalyst

A theoretical and experimental study on steam reforming of bio-oil over Ni/Co modified carbon-based catalysts

Insights into influence of CeO 2 crystal structure effects on hydrothermal hydrogenation for palmitic acid over Ni/CeO 2 catalysts

The Hydrocarbon Products Distributions and Stability of Cobalt-Based Catalyst for Fischer-Tropsch Synthesis

High hydrothermal stability Co@NC catalyst for hydrothermal deoxygenation of algae-based bio-oil model compound

Hydrocracking of Octacosane and Cobalt Fischer–Tropsch Wax over Nonsulfided NiMo and Pt-Based Catalysts

An All-in-one Zeolite@ru–al2o3 Nanoplatform Toward Highly Efficient, Anti-Coking, and Recyclable Hydrocarbon Cracking Catalysis

Hydrocracking and Hydroisomerization of N -Hexadecane, N -Octacosane and Fischer–Tropsch Wax over a Pt/SiO 2 –al 2 O 3 Catalyst

Improved Conversion of Stearic Acid to Diesel-Like Hydrocarbons by Carbon Nanotubes-Supported CuCo Catalysts

Direct Selective Hydrogenation of Fatty Acids and Jatropha Oil to Fatty Alcohols over Cobalt-Based Catalysts in Water

Hierarchical Porous Honeycomb NiCo/C Catalyst for Decarboxylation of Fatty Acids and Upgrading of Sludge Bio-Crude