Abstract:Pyrolysis catalysis is a promising method for converting waste plastics into high-value products from both economic and environmental perspectives. A low-cost catalyst is crucial for the batch treatment of waste plastics. In this study, a novel nickel catalyst based on coal gangue was prepared by impregnation. The catalyst is not only inexpensive, but also exhibits excellent catalytic performance in the pyrolysis of plastics. Polyethylene was pyrolyzed in a two-stage fixed-bed reactor to produce carbon nanotubes and hydrogen. The effects of catalytic temperatures on the production of hydrogen and carbon nanotubes from the catalyst were investigated. The maximum concentration and yield of hydrogen were 66.48 vol.% and 31.48 mmol/gplastic at 750 °C. Various techniques were used to fully characterize the carbon deposition, such as electron microscopy, temperature programmed oxidation, X-ray diffraction and Raman spectroscopy. The results showed when the catalytic temperature is 800 °C, the graphitization degree of obtained carbon was higher and the defects was fewer. The Raman IG/ID of the product was 0.72, which exceeded the graphitization of many industrially synthesized carbon nanotubes. It is also found that the catalytic temperature was very important for the hydrogen yield and the growth of carbon nanotubes. The temperature is too low, the catalyst activity is insufficient. If the temperature was too high, the metal particles in the catalyst would agglomerate, resulting in the reduction of the catalyst active site and catalyst deactivation. Therefore, it is necessary to select a suitable temperature to achieve the co-production of hydrogen and carbon nanotubes from waste plastics. This study provides a new and effective way for the catalytic pyrolysis of waste plastics and the comprehensive utilization of coal gangue.

Efficient production of hydrogen and carbon nanotubes via the cracking of a waste cooking oil model compound over ordered mesoporous Ni/KIT-6 catalysts

Nickel Nanoparticles Embedded in Porous Carbon-Coated Honeycomb Ceramics: A Potential Monolithic Catalyst for Continuous Hydrogenation Reaction

Co-production of hydrogen and carbon nanotubes from cracking of waste cooking oil model compound over Pt–Ni/SBA-15 catalysts

Enhanced Hydrogen Production from Steam Reforming of Vegetable Oil over Bimodal ZrO2-SiO2 Supported Ni Catalyst

The Production of Carbon Nano-Onions and Wheat Stalk Nano-Chains over Stainless Steel Supported La0.95mg0.05ni0.8co0.2o3 Catalyst

Catalytic Dehydrogenation of Cyclohexane over Carbon Nanotubes-Supported Elecroless Nickel-plating Catalysts

ZSM–5@KIT–6 encapsulated composite molecular sieves for the catalytic cracking of waste cooking oil model compound to produce light olefins

Stoichiometric‐Ratio‐Controlled Fe and Ni Non‐noble Metal Catalysts Supported on γ‐Al2O3 for Turquoise Hydrogen and Carbon Nanotubes Production

Synthesis and Catalytic Application of Ni-supported Carbon Nanotubes for N -Heptane Cracking

Carbon-coated mesoporous silica-supported Ni nanocomposite catalyst for efficient hydrogen production via steam reforming of toluene

Nickel Oxide Nanoparticles on KIT-6: An Efficient Catalyst in Methane Combustion

Reinforcing hydrogen and carbon nanotube co-production via Cr–O–Ni catalyzed methane decomposition

High selective hydrocarbon and hydrogen products from catalytic pyrolysis of rice husk: Role of the ordermesoporous silica derived from rice husk ash for Ni-nanocatalyst performance

Suppression of methane formation as catalytic converting light hydrocarbons into H2 and carbon nanotubes

Synthesis of Ni and Ni–Cu Supported on Carbon Nanotubes for Hydrogen and Carbon Production by Catalytic Decomposition of Methane

Preparation of rich hydrocarbon biofuels from cracking of waste cooking oil by CaO@Zn-KIT-6

Nitric Acid-Pretreated Natural Halloysite Nanotubes As Ni Nanoparticle Catalyst Supports for CO2 Methanation

Ni Based Catalyst Supported on KIT-6 Silica for CO Methanation: Confinement Effect of Three Dimensional Channel on NiO and Ni Particles

A Novel Nickel Catalyst Supported on Coal Gangue for Producing Hydrogen and Carbon Nanotubes from Waste Plastics

Hydrothermal stable Ni nanoparticles encapsulated in carbon for hydrothermal hydrogenation of long-chain fatty acids to alkanes

(Co/Zn) Al2O4 nano catalyst for waste cooking oil catalytic cracking