Effect of Cutting Flute Offset and Surface Treatment on Self-tapping Bone Screw

Changsheng Chen,Aimin Ji,Zhonghang Zhao,Lingjie Fu

DOI: https://doi.org/10.21203/rs.3.rs-136226/v1

2021-01-01

Abstract:Background: Self-tapping bone screws hard to insert will brings many surgical risks such as damage the bone, screw failure. This study investigated the effect of different cutting flute offset and different surface treatment on the insertion torque and pullout strength for self-tapping bone screws.Methods: Titanium alloy screws with five types cutting flute offset and two types surface treatment, were tested for maximum insertion torque and pullout strength in a simulation cortical bone material. One group of each type surface treatment screws were tested for torsional properties. All tests were principally performed according to bone screws test standard. Results: For two types surface treatment, the insertion torque of design with 0.4mm offset was less than others cutting flute offset (p＜0.05), and the pullout strength of design with 0.2mm offset was bigger than others group (p＜0.05). Compared two surface treatment, the insertion torque of dark anodized screws was less than bead blasted, and the former pullout strength was bigger than the latter screws with the offset from 0mm to 0.4mm(p＜0.05).Conclusions: The study results show that different cutting flute offset design and surface treatment effect on the insertion torque, and the bigger cutting flute offset has the lower inserting resistance, and the comprehensive performance of dark anodized screws were better than bead blasted.