Abstract:In this article, a novel waveguide-to-microstrip transition with a built-in dc/IF return path is proposed, in which a traditional E- plane probe is directly connected to the backshort by a thin metal wire along the axis of the waveguide. The proposed waveguide-to-microstrip transition implements an additional dc/IF return path while realizing mode conversion. Moreover, the presence of the dc/IF return path has little influence on the performance of the original E- plane probe. The operating principle is analyzed by theoretical analysis and full-wave simulation, and the design procedure of the transition is also presented. To implement the proposed dc/IF return path on different substrates, two approaches, including direct integration with planar circuits or with wire bonding technology, are developed. Furthermore, two back-to-back transition prototypes working in the millimeter and submillimeter bands were designed and characterized. The measured results are in excellent agreement with the simulations. Finally, as an application example, a 70-/140-GHz unbalanced frequency doubler adopting this structure for both dc biasing and dc grounding was designed and fabricated. Measured results show that the conversion loss of the fabricated doubler is less than 13 dB in the range from 125 to 145 GHz, and the minimum conversion loss is 11 dB at 140 GHz with 100-mW input power.

Design of Waveguide to Suspended Substrate Microstrip Line Transition Based on Quartz Substrate at 330GHz

Improved circuit model for coplanar-waveguide to microstrip-line transition on silicon substrate

Design of Millimeter-wave Rectangular Waveguide to HMSIW Transition Based on Trapezoidal-shaped Probe

A Novel Ultra-Wideband Waveguide-To-Microstrip Transition for Millimeter-Wave Applications

Design of Coaxial to Waveguide Transitions Compatible for WR-6 and WR-4

Design of a Novel Broadband Microstrip Line-Suspended Microstrip Line Transition Circuit

Broadband Terahertz Integrated Waveguide Transition and Its Application in the Amplifier Module

A Broadband Microstrip-to-Waveguide End-Wall Probe Transition and Its Application in Waveguide Termination

Compact in-line waveguide-to-microstrip coaxial probe transition for millimeter-wave

MILLIMETED WAVE WAVEGUIDE-TO-MICROSTRIP TRANSITION DESIGN

Millimeter-Wave Waveguide-to-Microstrip Transition With a Built-In DC/IF Return Path

Novel Ka-Band Waveguide——Microstrip Transition Structure

Compact Waveguide to HMSIW Transition Using Antisymmetric Tapered Probes

Waveguide-to-planar circuit transition for millimetre-wave detectors

Broadband Transition Between Waveguide and Substrate Integrated Waveguide Based on Quasi-Yagi Antenna

Design of Ultra- Wideband Double- Ridge- Waveguide to Microstrip Transition Using E-plane Probe

Wideband Waveguide to Microstrip Probe Transition with LTCC Technology

Ka-band Rectangular Waveguide to HMSIW Transition Based on Trapezoidal-shaped Probe

Broadband Stripline to Rectangular Waveguide Transition

Wideband Transition Between Rectangular Waveguide and Microstrip Using Asymmetric Fin Line Probe

Low loss and broadband transition between substrate integrated waveguide and rectangular waveguide