Abstract:High-speed $(\gt{\mathrm GS/s})$ medium-resolution (6-8b) ADCs are in high demand for wideband applications. The time-interleaved (TI) SAR ADC is widely used for its superior power efficiency. However, TI ADCs suffer from timing-skew mismatches that severely limit the performance. Some background timing-skew calibration methods rely on input derivative or input statistics such as autocorrelation [1] to detect timing-skew errors. These methods place limitations on the input signal, e.g., must be at high frequency, with large amplitude, have frequent zero crossings, etc. To be applicable to all types of input signals, some prior works inject a reference clock signal to sense the timing-skew errors [2–3]. Reference [2] injects the reference clock with slow rising edges to each interleaved channel. The timing-skew errors are detected by the difference of the injected voltages among channels. Nonetheless, it suffers from mismatches among different dither injection paths, leading to large residual timing-skew errors after calibration. Reference [3] injects the reference clock in the input common mode. However, common-mode voltage variations, as well as switch and routing mismatches among channels still result in large residual timing-skew errors. Furthermore, the periodic sampling in the calibration engine causes input impedance variation and generates spurs in the output spectrum [3]. To eliminate the residual errors and spurs, while maintaining applicability to all types of input signals, this work proposes a new background timing-skew calibration method that injects a dithered reference clock at the input buffer.

A 13-Bit 2-Gs/s Time-Interleaved ADC with Improved Correlation-Based Timing Skew Calibration Strategy

Parallel background calibration with signal-shifted correlation for pipelined ADC

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 1-Gs/s 11-B Time-Interleaved SAR ADC with Robust, Fast, and Accurate Autocorrelation-Based Background Timing-Skew Calibration

A Correlation-based Timing Skew Calibration Strategy Using a Time-Interleaved Reference ADC.

A 10-Bit 600-Ms/s Time-Interleaved SAR ADC with Interpolation-Based Timing Skew Calibration

A 14-Bit 500-Ms/s Time-Interleaved ADC with Autocorrelation-Based Time Skew Calibration

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

A 28-nm 10-b 2.2-GS/s 18.2-mW Relative-Prime Time-Interleaved Sub-Ranging SAR ADC With On-Chip Background Skew Calibration

22.4 A 4.8GS/s 7-ENoB Time-Interleaved SAR ADC with Dither-Based Background Timing-Skew Calibration and Bit-Distribution-Based Background Ping-Pong Comparator Offset Calibration.

A 2.5 GS/s 7-Bit 5-Way Time-Interleaved SAR ADC With On-Chip Background Offset and Timing-Skew Calibration

A 10-B 800-Ms/s Time-Interleaved SAR ADC with Fast Variance-Based Timing-Skew Calibration

A 3.7mW 11b 1GS/s Time- Interleaved SAR ADC with Robust One-Stage Correlation-Based Background Timing-Skew Calibration

A charge pump based timing-skew calibration for time-interleaved ADC

A High Accuracy and Bandwidth Digital Background Calibration Technique for Timing Skew in TI-ADCs

A Novel Autocorrelation-Based Timing Mismatch C Alibration Strategy in Time-Interleaved ADCs

A Dithered-Digital-Mixing Background Timing-Skew Calibration Method for Time-Interleaved ADCs

A Background Timing Skew Calibration Technique In Time-Interleaved Adcs

A 10-B 600-Ms/s 2-Way Time-Interleaved SAR ADC with Mean Absolute Deviation-Based Background Timing-Skew Calibration.