Abstract:Abstract Here, numerous oxygen-containing functional groups were grafted onto the surface of CNTs to improve their dispersibility in an electrolyte. The CNTs were characterized by FT-IR, Raman, XPS, FE-SEM, and TEM. The results revealed that the dispersibility of the functionalized CNTs in the composites was better than unfunctionalized CNTs. CNTs/Ni composites were deposited on a copper plate by pulsed electrodeposition and ultrasonic dispersion using an electrolytic bath with CNTs concentrations from 0 to 2 g l −1 . The friction and wear behavior of the composite coatings were assessed using two different methods. In the first method, the coatings were scratched with a progressively higher load from 0–100 N, and the results demonstrate a 10 percent reduction in the coefficient of friction (COF) of the composite compared to pure nickel. The other method involved applying a constant load of 30 N, the COF and microscopic wear mechanism were investigated at different carbon nanotube contents, and the results confirmed that the COF of the composites was gradually reduced with the increase of carbon nanotube mass concentration, and the COF was only 0.343 when the carbon nanotube content was increased to 2 g l −1 . According to the XRD results, increasing the CNTs contents changed the preferred growth orientation. Moreover, the FE-SEM images of the wear surface of the 1 g l −1 CNTs/Ni sample indicated that it had the best wear resistance and showed the smoothest wear trace without apparent cracks. The addition of CNTs enhanced the wear resistance of the nickel matrix due to the superior mechanical strength and lubricating effect of the CNTs. CNTs exposed to the matrix surface reduced the direct contact between the Ni matrix and the friction pair, acted as lubricants, and reduced the wear rate.

Deposition of Ag Nanoparticles on Polydopamine-Functionalized CNTs for Improving the Tribological Properties of PPESK Composites

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Thermal Insulation Performance and Ablation Resistance of Ethylene Propylene Diene Monomer Insulation Materials Reinforced with Polydopamine-Coated Carbon Nanotubes

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Preparation of Multi-element Doped Carbon Nanospheres with Core-shell Structure Derived from Polystyrene As Lubricating Additives for Improving Tribological Behavior

Tribological Properties of Polydopamine-Modified Ag As Lubricant Oil Additives

Influence of Carbon Nanotubes on Conductive Capacity and Tribological Characteristics of Poly(Ethylene Glycol-Ran-Propylene Glycol) Monobutyl Ether As Base Oil of Grease

Improved Tribological Performance of Polydopamine/Polytetrafluoroethylene Thin Coatings With Silica Nanoparticles Incorporated into the Polydopamine Underlayer

Surface Modification of YS-20 with Polydopamine for Improving the Tribological Properties of Polyimide Composites

Investigation of the microstructure and tribological properties of CNTs/Ni composites prepared by electrodeposition

Ag Nanoparticle Decorated Graphene for Improving Tribological Properties of Fabric/phenolic Composites

Simultaneously Enhanced Heat Dissipation and Tribological Properties of Polyphenylene Sulfide-Based Composites Via Constructing Segregated Network Structure

Polydopamine-wrapped Carbon Nanotubes to Improve the Corrosion Barrier of Polyurethane Coating.

Study on PPENK/SiC/Si_3N_4 Heat Resistant Anti-Wearing Nano-Composite Coating

Role of Well-Dispersed Carbon Nanotubes and Limited Matrix Degradation on Tribological Properties of Flame-Sprayed PEEK Nanocomposite Coatings

Superior Lubricity and Antiwear Performances Enabled by Porous Carbon Nanospheres with Different Shell Microstructures

Functionalization of Multi-Walled Carbon Nanotubes and Their Effect on the Tribological Properties of Poly(ether Ether Ketone) Composites

Tribological Properties of Oil Impregnated Carbon Nanocapsules Modified with Polydopamine-Polyethyleneimine

Enhanced Tribological Performance of TiO2-hBN/CNT Double-Layer Coating by CNT-Assisted Plasma Electrolytic Oxidation with Nanoparticles Addition

Ag nanoparticles homogeneously anchored on kaolin synergistically improve the tribological performance of PBO/phenolic resin liner composites

Functionalized N-doped Carbon Nanosheets Derived from Metal−organic Framework As Oil-Based Lubricant Additives for Improved Tribological Performance