Abstract:Compared to traditional biomass and coal-fired power plants, a process that includes integrated pyrolysis and subsequent gasification is a promising technology to deliver a larger electrical output through the production of high-purity hydrogen with a low carbon footprint. Chemical looping can further enhance the biomass contribution to the global renewable energy demand while fulfilling the stringent CO2 emission cuts needed in the energy sector. This study aims at investigating the feasibility of developing a solar catalytic chemical looping biomass refinery (SCCLBR) power plant for sustainable production of energy using a comprehensive plant modeling and techno-economic assessment. The plant is composed of 7 sequential units: i) biomass preparation (drying, transferring, and grinding), ii) reacting unit (SCCLBR), iii) water gas shift unit and heat recovery, iv) CO2 and H2S separation (Rectisol Process), v) sulfur removal (Claus Process), vi) air separation and vii) catalyst regeneration. The simulation was performed for 1–6 tonne/hour of biomass as input. The effect of key variables (feedstock load, water injection, and temperature) on the economic performance of the plant were analyzed. The simulated results of the chemical looping reactor were validated against the experimental results, while the results of Rectisol and air separation units were validated against the thermodynamic simulation. The results demonstrated that the CCLBR (without solar integration) and integrated SCCLBR can reach the efficiency of 34% and 41% respectively, yet the results have not been optimized. The sensitivity analysis indicated that water injection rate is the most influential parameter, which can even suppress the impact of biomass loading rate. A separate thermodynamic simulation was also performed to investigate the reaction equilibrium of oxygen carrier regeneration (Ca2Fe2O5) using CO2. The results demonstrated that a temperature above 730 °C is required to avoid carbonation (Fe2O3 and CaCO3 production). The maximum greenhouse gas emission in SCCLBR is 10.70, which is significantly lower than traditional coal-to-hydrogen and biomass-to-hydrogen power plants. It has also been found that across varying feedstock input rates, greenhouse gas emissions average 12.8% lower when solar PV supplements refinery power needs; optimization of the steam/biomass ratio may reduce emissions even further.

Techno-economic Assessment and Optimization of a Solar-Assisted Industrial Post-Combustion CO2 Capture and Utilization Plant

Exergoenvironmental Analysis and Thermoeconomic Optimization of an Industrial Post-Combustion CO2 Capture and Utilization Installation

Techno-economic Assessment and Optimization of a Solar-Driven Power and Hydrogen Co-generation Plant Retrofitted with Enhanced Energy Storage

Thermo- economic feasibility of solar-assisted regeneration in post-combustion carbon capture: A diglycolamine-based case

Optimizing post-combustion carbon capture: A comprehensive 3E analyses of energy, exergy, and exergoeconomic aspects with solar integration

Exergoenvironmental Analysis and Thermoeconomic Optimization of an Industrial CO 2 Utilization Integrated with a Urea Plant

Techno-Economic Assessment of the Integration of Direct Air Capture and the Production of Solar Fuels

Economic and operational assessment of solar-assisted hybrid carbon capture system for combined cycle power plants

CO2 Utilization Via Integration of an Industrial Post-Combustion Capture Process with a Urea Plant: Process Modelling and Sensitivity Analysis

Post-combustion emission control of a gas turbine cooperated solar assisted CO2 based-reforming utilizing CO2 capture technology

Thermal energy demand decarbonization for the industrial sector via an innovative solar combined technology

Feasibility of Integrating Solar Energy into A Power Plant with Amine-Based Chemical Absorption for Co2 Capture

Solar energy exploitation and storage in a novel hybrid thermo-electrochemical process with net-zero carbon emissions

Techno-Economic Evaluation on Solar-Assisted Post-Combustion CO2 Capture in Hollow Fiber Membrane Contactors

A techno-economic analysis of solar catalytic chemical looping biomass refinery for sustainable production of high purity hydrogen

Optimization based on the cost, energy, and environmental approaches of a solar-geo system: using real solar data of ParsaAbad-e-Moghan

Thermo-economic and environmental study of solar hybridization for existing fossil-fueled combined cycle power plants: comparison of two practical approaches

Toward a greener future: Solar solutions for industrial carbon capture

Multi-objective optimization of a cogeneration system based on solar energy for clean hydrogen, cooling, and electricity production

Efficient Recycling and Conversion of CO 2 to methanol: Process Design and Environmental Assessment

Process Design and Thermoeconomic Evaluation of a CO2 Liquefaction Process Driven by Waste Exhaust Heat Recovery for an Industrial CO2 Capture and Utilization Plant